1-5/16"
(33 mm)
2-5/16"
(59 mm)
1-5/16"
(33 mm)
Hot supply
input port
Cold supply
input port
Output
port
4-5/8"
(118 mm)
(open, fully CCW)
Adjustable screw
to limit handle turn
(max temperature)
Service stop
Note: (1) Input supply ports are 1/2" sweat
Ouput ports NPS 1/2" threaded
(2) plug for tub supply port is required
for shower only valve installations
2-5/8"
(67 mm)
2X 3/4"
(19 mm)
diameter
4-11/16"
(119 mm)
1-1/4"
(32 mm)
2-7/16"
(61 mm)
3/16"
(6 mm)
11/16"
(17 mm)
Tub supply port
Diverter /
Volume control
Dimensions Temptrol Shower & Tub-Shower Valve, 4-port valve with service stops
Warranty
Limited Lifetime ■ - to the original end purchaser in
residential/consumer installations.
5 years ■ - for commercial installations
Feature Highlights
Symmons Temptrol 4-port pressure-balancing mixing valve ■
with adjustable stop screw to limit handle turn
Integral service stops to allow water shut-o for servicing ■
valve
Supply input ports 1/2 inch sweat ■
Output ports NPS readed 1/2 inch ■
Integral volume control port (S-86-1-BODY-X only) ■
Integral diverter (S-86-2-BODY-X only) ■
Model Numbers
S-86-1-BODY-X Shower Valve
4-Port Temptrol Shower mixing valve with integral
volume control. Includes plug installed in tub supply
output port.
S-86-2-BODY-X Tub-Shower Valve
4-Port Temptrol Tub-Shower mixing valve with
integral diverter.
Standards / Certifications
ASME A112.18.1-2005/CSA B125.1-05
Specification & Parts Assembly Submittal
Temptrol
®
Shower & Tub-Shower Mixing Valve
Models
S-86-1-BODY-X, S-86-2-BODY-X
Location:
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250
■ Fax (800) 961-9621, (781) 664-1300
Website: www.symmons.com
■ Email: cu st om er se rv ic e@ sy mm on s. co m
©2009, 2010 Symmons Industries, Inc. Printed in U.S.A.
■ 060810
Hot seat
removal tool
(T-35A)
Cold seat
removal tool
(T-35B)
5/16" wood
screw
Pull out
to remove
Service
stop
Retainer
wrench, (T-55C)
Service stop and retainer kit (T-52)
Spindle cap assy.
& control spindle
(TA-10/12)
Temptrol
Valve
S-86-1-BODY-X.......Shower only valve (v1)
S-86-2-BODY-X.......Tub Shower valve (v2)
Hot & cold seat
repair kit (TA-4)
Hot
supply
input
(v1) Volume spindle...TA-25A
(v2) Diverter spindle..TA-25B
Shower
supply
output
Cold supply input
(v1) plug inserted
(v2) Tub supply
output
Spindle cap
washer repair kit
(T-16)
Control spindle
assy. (TA-10)
Spindle cap assembly
(T-12A)
spindle cap gasket
spindle cap
limit stop screw
o-ring
washer
washer
packing nut
hot washer screw
hot washer
cold washer retainer
cold washer
spindle cap gasket
Control spindle
washer repair kit
(TA-9)
TEMP LIMIT
stop adjust
hot
seat
5/16" Allen
wrench
Retainer
cold
seat
Parts Assembly Temptrol Tub-Shower Valve, S-86-1-BODY-X / S-86-2-BODY-X
/