DigitalSpot7000DT
1
Longthrowoptics(2.7–3.5:1)
Shortthrowoptics(1.2–1.7:1)
Installationinstructions
1. DisconnecttheDigitalSpot7000DTfrompower.
2. Removethefrontcoverofthefixturehead(2)byloosening
the4quarter‐turnfasteners(1).
3. Removethemoduleoftheglasscover(4)bylooseningthe3
quarter‐turnfasteners(3).
4. Placethelong(short)throwopticmodule(5)insteadofthe
moduleoftheglasscover(4)andsecureitbythe3quarter‐
turnfasteners(6).
5. Fastentheplasticfrontcoverbackonthefixtureheadby
meansofthe4quarter‐turnfasteners.
6. SelecttheoptionLongThrowOptics(forthelongthrow
opticswiththrowdistanceration2.7‐3.5:1)
orShortThrow
Optics(fortheshortthrowopticswiththrowdistanceration
1.2‐1.7:1)inthemenu"Personality"
("Personality"Æ"Projectionpresetting"Æ"ThrowOpticsMode).
Version1.1 May2009 ROBELighting