OWNER’S MANUAL
MPN(s): ABBACK
SKU(s): 400991
UPC(s): 840009200533
2
P A R T S D I A G R A M / E X P L O D E D V I E W
3
KEY
BOX
DESCRIPTION
QTY
(1)
1
Across Foot Frame
1
(2)
1
Support Frame
1
(3)
1
Cross Support Frame
1
(4)
1
Foam Frame
1
(5)
1
Cross Connection Frame
1
(6)
1
Adjustable Frame
1
(7)
1
Foam Washer Φ68.5*Φ9.5*3
1
(8)
1
Seat Cushion 320*320*60
1
(9)
1
Right Handle Frame
1
(10)
1
Left Handle Frame
1
(11)
1
Swing Frame
1
(12)
1
Weight Plate Holder
1
(13)
1
Seat Cushion 320*320*60
1
(14)
1
Rear Foot Frame
1
(15)
1
Rotary Plate
1
(16)
1
Pins Combination
1
(17)
1
Rubber Pad 45*35*8
2
(18)
1
Foot Pad F50
4
(19)
1
Deep Groove Ball Bearing 61805ZZ
2
(20)
1
Weight Plate Frame Φ25*135*M10
1
(21)
1
Sleeve Φ29.5*Φ24.5*60
1
(22)
1
End Cap Φ48*2
2
(23)
1
Clip-spring Φ50*Φ5
1
(24)
1
Crash pad Φ77*Φ47.5*13
2
(25)
1
Sleeve Φ45*Φ25.2*11
1
(26)
1
Copper Sleeve Φ38*Φ32*Φ25.2*18
2
(27)
1
Flat Washer Φ10.5*Φ30*2.5
12
(28)
1
Foam Φ125*Φ39*450
1
(29)
1
Foam Washer Φ68.5*Φ9.5*3
3
(30)
1
Adjustable Knob Φ45*M18*1.5*54
2
4
(31)
1
Sleeve F50*2-F40
3
(32)
1
Front Holder Sleeve Φ29.5*130
2
(33)
1
End Cap F40*2
4
(34)
1
Nylon Washer Φ80*4
2
(35)
1
Foam Φ100*Φ26*180
2
(36)
1
Handle Sleeve
2
(37)
1
End Cap F50*3
4
(38)
1
Flat Washer Φ11*Φ20*2
18
(39)
1
Nut M10
12
(40)
1
Hex Head BoltM10*9
2
(41)
1
Hex Head Bolt M10*75
2
(42)
1
Hex Head Bolt M10*70
9
(43)
1
Hex Head BoltM10*25
4
(44)
1
Button Head Bolt M8*25
5
(45)
1
Spring Washer Φ10
3
(46)
1
Flat Washer Φ9*Φ16*1.6
3
(47)
1
Spring Washer Φ8
3
(48)
1
Pin Φ8*35
1
(49)
1
Cross Bolt M5*10
4
(50)
1
Inner Hex Head Bolt M10*25
1
5
A S S E M B L Y I N S T R U C T I O N S
Step 1:
Using Hex head bolt M10*70 (42) through Flat washer Φ10.5*Φ30*2.5 (27) and Cross support
frame(3)Rear foot frame(14), Flat washer Φ11*Φ20*2(38), tighten Nut M10(39).
6
Step 2:
Using Hex head bolt M10*70 (42) through Flat washer Φ10.5*Φ30*2.5 (27) to connect Across foot frame
frame(1) and Cross support frame(3) and through Flat washer Φ11*Φ20*2(38), screw on Nut M10(39).
Don’t tighten it.
7
Step 3:
Using Hex head bolt M10*70 (42) through Flat washer Φ11*Φ20*2(38) , connect Across foot frame frame(1)
and Support frame(2) and through Flat washer Φ10.5*Φ30*2.5(27), screw on Nut M10(39). Don’t tighten it.
8
Step 4 :
Using Hex head bolt M10*9(40) and Hex head bolt M10*70 (42) through Flat washer Φ10.5*Φ30*2.5 (27),
connect Support frame(2) Cross support frame(3) Cross connection frame(5), through Flat washer Φ11*Φ
20*2(38) and screw on Nut M10(39). Tighten all Nuts M10(39).
11
Step 7 :
Using Flat washer Φ11*Φ20*2(38), screw on Nut M10(39) and Hex head bolt M10*75(41), install Right
handle frame(9) and Left handle frame(10) on Seat cushion 320*320*60(8). Using Flat washer Φ11*Φ
20*2(38), and Hex head bolt M10*70 (42) and Hex head bolt M10*25(43) install Seat cushion
320*320*60(13) on Seat cushion 320*320*60(8).
Step 8 :
UsingFoam washer Φ68.5*Φ9.5*3(7) through Adjustable frame(6), Nylon washer Φ80*4(34) and Foam Φ
100*Φ26*180(35). Using Button head bolt M8*25(44) through Foam washer Φ68.5*Φ9.5*3(29), Flat
washer Φ9*Φ16*1.6(46) and Spring washer Φ8(47) install on Foam washer Φ68.5*Φ9.5*3(7).
12
Step 9 :
Using Adjustable frame(6) and Seat cushion 320*320*60(8) insert the frame and tighten Adjustable knob Φ
45*M18*1.5*54(30) and Button head bolt M8*25(44).
13
Step 10 :
Using Crash pad Φ77*Φ47.5*13 (24) insert the rear foot frame and install Clip-spring Φ50*Φ5(23).
14
This concludes the ABBACK Owner’s Manual.
If applicable to your product, make sure to tighten all
nut-and-bolt combinations before use.
Enjoy!
DISCLAIMER
This equipment must be used with care by capable and competent individuals under supervision, if necessary.
The use of any fitness equipment, including this one, involves the potential risk of injury. You accept and assume full
responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may
occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and
agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the
same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW,
COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN
USE OF THE EQUIPMENT.
NEED HELP?
CONTACT US FIRST.
1 (800) 605-8241
info@titandistributorsinc.com / www.titan.fitness
Business Hours: Monday–Friday • 8:00 a.m.–5:00 p.m. (CT)
/
