Cree BA19-08027OMF-12CE26-1C100 User manual

Hello! I am an AI chatbot trained to assist you with the Cree BA19-08027OMF-12CE26-1C100 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Cree Connected® LED Bulb: How to Reset

If you have successfully set up your compatible hub, but cannot get a Connected Cree®

LED bulb to pair with the hub in the applicable app, you can factory reset your bulbs.

Step 1

Install your bulb in a light fixture and turn it on. (For best results we recommend

installing the bulb where you can turn the power off at a wall switch.)

Step 2

Turn the light switch on at one second and off at two second intervals (1second on : 2

seconds off) until the light blinks once to indicate it has reset. This should happen at the

4th full on-off cycle.

Step 3

Turn the light off and pair the bulb with your hub via the mobile App.

If you need additional assistance, you may contact Cree Customer Service (1-866-924-

3645)