Cree BB13-02027OMC-12DE12-1C600 Installation guide

Brand: Cree

Model: BB13-02027OMC-12DE12-1C600

Type: Installation guide

Better Light Changes Everything.

Recommended Dimmers for Cree

Candelabra LED Bulbs

Cree LED bulbs are designed to be dimmed with standard incandescent type

dimmers and are compatible with most Electronic Low Voltage (ELV) dimmers.

This list was generated from lab testing of samples and your results may vary.*

Ace 3247939 Incandescent Leading 600 1 25

Leviton Illumatech IPL06 Incandescent Leading 600 1 18

Leviton SureSlide 6674 LED/CFL/INC Leading 600 1 18

Leviton Trimatron 6602 Incandescent Leading 600 1 17

Lutron Diva DV-10P Incandescent Leading 1000 1 35

Lutron Diva DVELV-303P ELV Trailing 300 1 33

Lutron Skylark S-10P Incandescent Leading 1000 1 37

Lutron Skylark S-600H Incandescent Leading 600 1 21

Lutron Skylark SELV-300P ELV Trailing 300 1 33

Lutron Skylark Contour CT-600P Incandescent Leading 600 1 21

Lutron Lumea LGCL-153 CFL/LED Leading 600 1 21

Lutron Masestro MACL-153 CFL/LED Leading 600 1 21

2/1/16

ELV

CFL/LED

Incandescent

Electronic Low Voltage (transformer)

Compact Fluorescent Lamp/Light Emitting Diode

Incandescent or halogen lamp

Manufacturer

Series

Part Number

Load Type

Phase Cut

Edge

Rating (W)

min

max

Bulbs Per Dimmer

Works Best With

No Flicker or shimmer

observed and smooth dimming

across range. No audible noise

when using ELV/Trailing edge

dimmers. Minimal audible noise

may occur when using Leading

edge dimmers.

*The presence of a dimmer on this chart is not a guarantee or warranty of the compatibility of the LED

bulb in any particular installation. Absence of a dimmer from this chart does not imply incompatibility.

Please reference the dimmer manufacturer’s instructions for installation and further information.

Leviton Decora DSL-06 LED/CFL/INC Leading 600 1 25

Lightolier Multiset Pro MSP600VA LED/INC Leading 600 1 21

Lutron Faedra FAELV-500 ELV Trailing 500 1 33

Miro MCD267 ELV Trailing 600 1 21

Manufacturer

Series

Part Number

Load Type

Phase Cut

Edge

Rating (W)

min

max

Bulbs Per Dimmer

Works With

May produce flicker or shimmer.

Minimum adjustment to dimming

level may be required. No audible

noise when using ELV/Trailing

edge dimmers. Minimal audible

noise may occur when using

Leading edge dimmers.

Better Light Changes Everything.

Cree

Candelabra LED Bulbs

Compatible Part

Numbers

BB13-02027OMC-12DE12-1C

BB13-03527OMC-12DE12-1C

For informational purposes only. Not a

warranty or specification. Subject to

change without notice.

See creebulb.com for warranty. Cree

is a

registered trademark, and the Cree logo is a

trademark of Cree, Inc.

Cree LED bulbs are designed to be dimmed with standard incandescent type

dimmers and are compatible with most Electronic Low Voltage (ELV) dimmers.

This list was generated from lab testing of samples and your results may vary.*

*The presence of a dimmer on this

chart is not a guarantee or warranty

of the compatibility of the LED bulb in

any particular installation. Absence

of a dimmer from this chart does not

imply incompatibility.

Please reference the dimmer

manufacturer’s instructions for

installation and further information.

2/1/16

Cree BB13-02027OMC-12DE12-1C600 Installation guide

Cree BB13-02027OMC-12DE12-1C600 Installation guide

Cree BB13-02027OMC-12DE12-1C600 Installation guide

Related papers

Other documents