Brother HL-1850 Installation guide
- Category
- Networking
- Type
- Installation guide
This manual is also suitable for
Brother HL-1850 is a laser printer suitable for both home and office use, offering reliable printing performance and a range of features to enhance productivity. It boasts fast print speeds of up to 20 pages per minute, allowing you to quickly handle your printing tasks. With its compact design, it fits easily into your workspace without taking up too much room. The HL-1850 provides flexible connectivity options, including parallel and USB interfaces, making it compatible with various computers and operating systems.
Brother HL-1850 is a laser printer suitable for both home and office use, offering reliable printing performance and a range of features to enhance productivity. It boasts fast print speeds of up to 20 pages per minute, allowing you to quickly handle your printing tasks. With its compact design, it fits easily into your workspace without taking up too much room. The HL-1850 provides flexible connectivity options, including parallel and USB interfaces, making it compatible with various computers and operating systems.
Reprint
Data
Go
Job cancel
Back
Set
OFF ON
O I
OFF ON
O I
OFF ON
O I
Turn on the printer power switch.
Turn off the printer power switch.
Connect the parallel interface cable to your PC, and
then connect it to the printer.
Follow the instructions on the screen.
Click the Finish button.
The setup is now complete.
For Parallel Interface Cable Users Only
Step 5 Install the Driver & Connect the Printer to Your PC
Note: Setting Your Printer as the Default Printer
(For Windows
®
2000/XP Users Only)
Step 5 Connect the Printer to Your PC & Install the Printer Driver
Control Panel
Note: When the "Add New Hardware Wizard" appears on
your PC, click the Cancel button.
Note: Make sure the USB interface cable is NOT connected
to the printer, and then begin installing the driver. If you have
already connected the cable, remove it.
Note: If the "Add New Hardware
Wizard" appears on your PC, click the
Cancel button.
For USB Interface Cable Users Only
On
Blinking
Off
Data remains in the printer buffer.
Receiving or processing data.
No remaining data.
Click "Connect the interface cable &
Install the driver/utility."
Select the USB interface cable. Click the Install button.
Click the Install button.
Follow the instructions on the
screen.
Click "Connect the interface cable & Install the
driver/utility."
Select the Parallel interface cable.
Steps 1 to 4 Follow these steps in the Quick Setup Guide first.
Driver Installation Guide
Windows
®
For non-Network Users
Laser Printer HL-1850 and HL-1870N
Follow the instructions in this guide for your interface cable.
Some illustrations are based on the HL-1870N.
Click the Finish button.
The setup is now complete.
*
1
*
1 Please follow the steps below when the printer is not set as the default printer.
When this screen appears, make sure the printer power switch is on.
Connect the USB interface cable to your PC, and then connect it to the printer.
Click the Next button.
LJ5996001 Printed in China
1. Select the SETUP mode by pressing the + button, and then press the Set button.
2. Check that the LANGUAGE message appears, and then press the Set button.
3. Choose your language by pressing the
+ or - button, and then press the Set button. An asterisk mark (
*
)
appears at the end of the display.
(You can return to the READY status by pressing the Go button.)
Note Please enhance the RAMDISK size when you want to use the Reprint functions without the optional HDD
or CompactFlash.
See "RAM expansion" in Chapter 4 of the User's Guide on the supplied CD-ROM.
Data LED : Orange
Buttons
Language Setting (Default is English)
For more information, see "CONTROL
PANEL" in Chapter 3 of the User's Guide on
the supplied CD-ROM.
Click Start,
Setting and Printers.
Select the Brother HL-1850 or HL-1870N
icon.
From the File menu, select
Set as Default printer.
Exit from the control panel menu, Reprint settings or clear error messages.
Pause / Continue printing.
Stop and cancel the printer operation in progress.
Select the Reprint menu.
Move forward through menus.
Move backward through menus.
Select the control panel menu.
Set the selected menus and settings.
Go back one level in the menu structure.
Set
Back
Go
Job Cancel
Reprint
Menu
©2002 Brother Industries, Ltd. ©1998-2002 TROY XCD Inc. ©1983-1998 PACIFIC SOFTWORKS INC. ALL RIGHTS RESERVED
Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP, HP/UX, JetDirect and JetAdmin are trademarks of Hewllet-Packard Company. UNIX is a trademark
of UNIX Systems Laboratories. Adobe PostScript and PostScript3 are trademarks of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc.
All other brand and product names are trademarks or registereted trademarks of their respective holders.
1
1
4
678
5
23
432
5
12 3
6
OFF ON
O I
OFF ON
O I
Enter your unique port name (ex.
BLP1), and then click the OK button.
Select "LPR (Recommended),"
and then click the Next button.
Step 5 Connect the Printer to Your Network
& Install the Driver
Step 6 Configuring the NetBIOS Port
Step 6 Select the Appropriate Printer Queue or
'Sharename'
Step 6 Configuring the LPR Port
For Windows
®
95/98/Me Users Only
For Windows NT
®
4.0 Users Only
For Windows
®
2000 Users Only
For Windows
®
XP Users Only
Specify your printer's IP Address (or click the Browse button
to see a list of printers), and then click the OK button.
Click the Finish button to restart your PC.
After your PC has restarted, setup will be complete.
Enter your unique port name (ex. BNT1),
and then click the OK button.
Enter the path name (or click the Browse... button to
see a list of printers), and then click the OK button.
Click the Finish button to restart your PC.
After your PC has restarted, setup will be complete.
Select "NetBIOS," and then click
the Next button.
For Brother Peer-to-Peer Network Printer Users (LPR- Recommended Peer-to-Peer Printing Method)
For Brother Peer-to-Peer Network Printer Users (NetBIOS)
Steps 1 to 4 Follow these steps in the Quick Setup
Guide first.
For All Network Users
For Network Shared Printer Users
Select your printer's queue, and then click the
OK button.
When the appropriate queue is specified, the printer driver
will be installed.
The setup is now complete.
*
1 Follow the instructions for the appropriate network connection style and your operating system.
Click the Next button.
Enter your printer's IP Address and your unique port
name, and then click the Next button.
After your PC has restarted, click
Start, Settings and Printers.
The setup is now
complete.
Select the Brother HL-1850 or Brother HL-1870N icon.
From the File menu, select Properties to open the driver properties.
Click the Configure Port...
button in the Ports tab.
Select "LPR" on protocol, and then click the OK button.
Close the driver properties.
Select "LPR (Recommended)," and then
click the Next button.
Click the Finish button, and then click the OK button.
Click the Finish button again to restart your PC.
Click the Next button.
Enter your printer's IP Address and
your unique port name, and then click
the Next button.
Select "LPR
(Recommended)," and
then click the Next button.
Click the Finish button.
Click the OK button.
Click the Finish button to restart your PC.
After your PC has restarted, setup will be complete.
Click the Finish button to restart your PC.
After your PC has restarted, setup will be complete.
Enter your printer's IP Address and the queue
name BINARY_P1, and then click the OK button.
Select "LPR (Recommended),"
and then click the Next button.
Note: If this screen appears, insert the
Windows NT
®
4.0 CD-ROM into your CD-ROM
drive.
Turn on the printer power switch.
Select the Network interface
cable.
Turn off the printer power switch.
Connect the network interface cable to
the printer, and then connect it to a free
port on your hub.
Click "Connect the interface cable &
Install the driver/utility."
Follow the instructions on the screen.
Select "Network Shared Printer" or "Brother Peer-to-Peer
Network Printer," and then click the Next button.
Go to Step 6.
*
1
Hub
Click the Install button.
For HL-1850 users: If you are going to connect the printer to your network, purchase the optional
Network board (NC-4100h).
Before you continue, please ensure that the administrator has configured the network printer
settings correctly referring to the Network Quick Setup Guide.
Follow the instructions in this guide for your network type and operating system.
Some illustrations are based on the HL-1870N.
Driver Installation Guide
Windows
®
For Network Users
1
4
7
12
8
56
23
1
1
1
5
1
12 3 4
23 45
678
23 4
23
23 4
-
1
-
2
Brother HL-1850 Installation guide
- Category
- Networking
- Type
- Installation guide
- This manual is also suitable for
Brother HL-1850 is a laser printer suitable for both home and office use, offering reliable printing performance and a range of features to enhance productivity. It boasts fast print speeds of up to 20 pages per minute, allowing you to quickly handle your printing tasks. With its compact design, it fits easily into your workspace without taking up too much room. The HL-1850 provides flexible connectivity options, including parallel and USB interfaces, making it compatible with various computers and operating systems.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Brother HL-2600CN Series User manual
-
Brother HL-1850 Installation guide
-
-
Brother HL-5280DW Installation guide
-
Brother HL-8050N Quick setup guide
-
Brother HL-2040 User manual
-
Brother 2040 User manual
-
Brother HL-6050D Quick setup guide
-
Brother HL-1470N User manual
-
Brother HL-5250DN Series User manual