bObsweep 726670294652 User manual

Type
User manual
OWNER’S MANUAL
A guide to your intelligent floor cleaner
Junior
by bObsweep
Model No. WJ540011
Congratulations on your new intelligent floor cleaner! Junior is now at your service.
To see Junior at his best, please read the Quick Start Guide and this manual thor-
oughly. Welcome to the bObsweep family and happy cleaning!
If you have any questions or concerns, feel free to contact our helpful team at:
Congratulations!
Get Junior Ready
to Clean
Install Side Brush 16
Charge Junior 17
Sync Junior’s Charging
Station & Remote 19
Junior’s First Clean 21
FAQsCover Buttons Cleaning Behavior
& Challenges
Important Safety
Instructions
Charging Station
& Remote Control
Charging Station
Placement 24
Auto Charging 25
Manual Charging 26
Conserving Battery 27
Remote Control 28
Syncing Junior’s
Remote 31
End User License
Agreement
What Comes in
Junior’s Box?
Junior’s Anatomy Trouble Shooting
& Checkup Test
Troubleshooting 48
Home Checkup
Test 53
Warranty
Infromation
Maintenance
Dustbin 34
Filters 36
Main Brush 38
Side Brush 40
Sensors 41
(De)Reactivate Edge
Sensors 42, 43
Battery 44
13 64
6 33
23 72
10 63
15 67
8 47
6 7
Always follow basic safety precautions, including:
Read ALL instructions before use.
To protect against electrical shock, do not immerse any part of Junior in water or
other liquids.
Unplug Junior from the wall outlet when he is not in use and before conducting main-
tenance.
Do not operate Junior or his charging station if they have been damaged in any way.
If Junior is not working as he should, or has been dropped, damaged, left outdoors,
or dropped in water, contact our customer care center at [email protected].
Do not handle Junior or his charging station with wet hands; use only on dry surfaces.
Do not use Junior outdoors.
Junior is not intended for use by persons (including children) with reduced physical
or mental capabilities, or lack of experience and knowledge, unless under the close
supervision of a person responsible for their safety.
Do not pull or carry the charging station by the cord, use the cord as a handle, close
a door on the cord, or pull the cord around sharp edges or corners. Keep the cord
away from heated surfaces. To unplug the cord, grasp the plug, not the cord itself.
Do not mutilate or incinerate the battery, as it will explode at high temperatures.
Do not attempt to open Junior’s charging station. Repairs on his station should only
be carried out by our qualified customer care center.
Do not expose Junior’s charging station to high temperatures or allow moisture or
humidity of any kind to come into contact with it.
Do not let Junior pick up toxic materials (chlorine bleach, ammonia, drain cleaner,
etc.).
Do not let Junior pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes. Do not use Junior to pick up flammable or combustible liquids
such as gasoline, nor use him in areas where they may be present.
Do not use Junior in an enclosed space filled with vapors given off by oil-based paint,
paint thinner, moth-proofing substances, flammable dust, or other explosive or toxic
Important Safety Instructions
vapors.
Leaks from battery cells can occur under extreme usage or temperature conditions. If
the liquid gets on skin, wash quickly with water. If the liquid gets into the eyes, flush
them immediately with clean water for a minimum of 10 minutes, and seek medical
attention.
Do not use Junior for anything other than his intended purpose, as specified in this
manual.
Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is subject to the fol-
lowing two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by un-
authorized modifications or change to this equipment. Such modifications or change
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
8
Junior, Your Intelligent Floor Cleaner 1
Charging Station 2
Spare Main Brush 3
Charging Adapter 4
Remote Control 5
Screwdriver 6
2 Side Brushes (1 Spare) 7
Cleaning Tool 8
Pack of Screws 9
Filter Replacement 10
Owner’s Manual, Quick Start Guide, Warranty Card 11
What Comes in Junior’s Box?
1
2
3
4
5
6
7
8
9
10
11
2
1
4
3
10
Bottom View
Charging Plates 1
Front Wheel 2
Side Brush 3
Battery 4
Main Brush 5
ON/OFF Switch (on Junior’s side) 6
Charging Inlet (on Junior’s side) 7
Left and Right Wheels 8
Dustbin 9
Junior’s Anatomy
1
3
4
6
7
8
8
9
2 1 5
Top View
Bumper 1
Signal Transmitter 2
Display 3
Cover Buttons 4
12 13
Remote Control 1
Charging Station 2
Cover Buttons
GO! 1
Junior will clean on his default setting
WAFFLE 2
Send Junior to his charging station
MUTE 3
Mute Junior’s beeping
CHECKUP 4
Put Junior in checkup mode / Deactivate edge sensors (page 59)
1
2
cleaning
charging
Oops! I feel there’s something funny
going on with my:
Edge Sensors
Touch Sensors
Left Wheel
Main Brush
Obstacle Sensors
Dustbin
Right Wheel
Power System
1 2 3 4
Getting Junior
Ready to Clean
OR
16 17
Plug the charging adapter into the side
of the charging station. The station’s red
power light will turn on.
Place Junior on his charging station with
the metal plates on his underbelly sitting
on top of the nodes on his station.
Install Junior’s Side Brush
After installing Junior’s side brush, you must now set him to charge.
Charge Junior
1 2
Plug the charging adapter into Junior’s
side. Junior will chirp and start charging.
1
Before Junior’s first clean, you must install his side brush, which allows him to sweep
along corners, walls, and other hard-to-reach places.
To do this, you will need the following materials, all of which are included inside
Juniors box: a side brush, a flat head screwdriver, and a short screw.
Flip Junior over onto a
flat surface. Place the
side brush over the
empty socket on Ju-
nior’s underside.
Secure Junior’s side brush
onto the socket using the
flat head screwdriver and
short screw.
You may use the additional
side brush and screws as
spares.
1 2 3
cleaning
charging
Oops! I feel there’s something funny
going on with my:
Edge Sensors
Touch Sensors
Left Wheel
Main Brush
Obstacle Sensors
Dustbin
Right Wheel
Mainboard
cleaning
charging
Oops! I feel there’s something funny
going on with my:
Edge Sensors
Touch Sensors
Left Wheel
Main Brush
Obstacle Sensors
Dustbin
Right Wheel
Mainboard
18 19
3 4
When Junior is charging, the battery
bars on his display screen will flash and
the word “Charging” will appear.
When Junior has fully charged, the bat-
tery bars will remain still and the word
“Charging” will disappear.
Junior automatically returns to his charging station when his battery reaches 15%.
If Junior has trouble finding his station, it likely needs to be synced.
To sync the charging station:
Sync Junior’s Charging Station and Remote
While the station is
plugged in, hold down
the SYNC button on the
back of it.
Junior will chirp twice to
let you know the sync was
successful.
While still holding down
the SYNC button, flip Ju-
nior’s power switch ON.
1 2 3
20 21
Junior’s remote runs on 2 AAA batteries (not included). If Junior is not responding to
his remote, it likely needs to be synced.
To sync the remote:
Junior is now ready to clean!
Press the GO! button on his cover — or on his remote — and he will clean on his
default setting.
Junior’s First Clean
Hold down the PAUSE
button on Junior’s remote.
Junior will chirp twice to
let you know the sync was
successful.
While still holding down
the PAUSE button, flip Ju-
nior’s power switch ON.
1 2 3
Charging Station
& Remote Control
24
Position the charging station against a wall on a hard, flat surface.
Make sure there is at least 10 feet (3 meters) of open space to the front and 2 feet
(0.5 meters) to the sides.
Charging Station Placement
Junior is smart and automatically searches for his charging station when his battery
reaches 15%. If Junior has trouble finding his station, it likely needs to be synced.
To sync the charging station:
You can also direct Junior to his charging
station at any time by pressing the CHARGE
button on his remote.
Auto Charging
Plug the charging adapter
into the charging station.
The station’s red power
light will turn on.
Junior will chirp twice to
let you know the sync
was successful.
Hold down the SYNC
button on the back of the
charging station while at
the same time flipping Ju-
nior’s power switch ON.
1 2 3
2 ft (0.5 m)
2 ft (0.5 m)
10 ft (3 m)
26 27
Using the charging station:
Place Junior directly onto his plugged-in charging station.
Make sure his charging plates sit directly on top of the nodes on his station.
Using the adapter:
Plug the charging adapter directly into the inlet on Junior’s side.
Manual Charging
Junior should not sit on his charging station for more than 5 days. If you will not be using
him at least once every 5 days, flip his side power switch OFF to conserve battery.
Conserving Junior’s Battery
When Junior is charging, the
battery bars on his display
screen will flash and the word
“Charging” will appear.
When Junior has fully charged,
the battery bars will remain still
and the word “Charging” will
disappear.
5
days
29
Adjust Junior’s cleaning speed, and control his movements from his remote control.
Power 1
GO! 2
Corner 3
Mute 4
Waffle 5
Charge 6
Speed 7
Navigational Arrows 8
Pause 9
Junior’s remote requires 2 AAA batteries (not included). Do not leave the batteries
in the remote if you are not using it on a regular basis. Keep the remote at a normal
room temperature.
Remote Control
Power
Wakes Junior or puts him in standby mode
GO!
Junior will begin cleaning
Corner
Junior will start cleaning along corners and walls
Mute
Mutes Junior’s beeping while he is in standby mode
Waffle
Junior will target a localized mess
While in standby mode, Junior will
beep every 2 minutes to let you
know that he is not fully powered
off. To conserve Junior’s battery,
flip his power switch OFF, or press
the MUTE button on his cover or
remote to mute his beeping.
9
23 8 1 5 6
7
8
8
8
4
30 31
Syncing Junior’s Remote
If Junior is not responding to his remote, it likely needs to be synced.
To sync Junior’s remote:
Hold down the PAUSE
button on Junior’s remote.
Junior will chirp twice to
let you know the sync was
successful.
While still holding down
the PAUSE button, flip Ju-
nior’s power switch ON.
1 2 3
Charge
Sends Junior to his charging station
Speed
Cycles through Junior’s cleaning speeds
Navigational buttons
Guides Junior forward, backward, right, or left
Pause
Pauses or resumes Junior’s movements
Hold down the navigational
buttons to keep Junior moving
in that desired direction.
Maintenance
34 35
To empty the dustbin:
Dustbin
Push the center black button on Junior’s
back to release the dustbin, and pull.
You may wipe the dustbin with a dry
cloth or brush it with the cleaning tool.
Open the transparent gate to empty
the bin.
When done, replace the transparent gate
and slide the dustbin back into Junior.
1 3 2 4
Never wash the
dustbin nor fill it
with water or any
other fluid.
36 37
Three filters are located inside the dustbin’s ceiling. These filters capture fine particles
and allergens, preventing them from escaping back into the air.
To remove the filters:
You will see three filter layers:
Mesh filter 1
for larger particles
Electrostatic filter 2
for fine particles
HEPA filter 3
for sub-micron particles
Use the cleaning tool to brush dust off the filters. It is recommended that you change
Junior’s filters every 6 months, depending on the frequency and intensity of his cleaning.
Filters
Eject the dustbin. Pull the filter’s frame towards you.
1 2
3
2
1
38 39
It is recommended that you remove and clean Junior’s main brush on a weekly basis.
To clean Junior’s main brush:
To reinstall the brush:
Main Brush
Remove the screw secur-
ing Junior’s main brush
using a flat head screw-
driver.
You may use a pair of
scissors to cut away any
hair or threads wrapped
around the brush, or a
pair of tweezers to re-
move congestion from the
notches where the main
brush is held.
Use the cleaning tool to
remove hair and debris
from both ends of the
brush as well as the com-
partment inside Junior.
1 2 3
Replace the end piece and insert the
opposite end of the brush into the square
indentation inside Junior.
Lastly, re-tighten the screw.
1 2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

bObsweep 726670294652 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI