Dwyer Series WDG User manual

Dwyer
Brand
Dwyer
Model
Series WDG
Type
User manual

Dwyer Series WDG is a weatherproof digital pressure gage designed to measure gas and liquid pressure with high accuracy. Its rugged design makes it suitable for outdoor and industrial environments, while the backlit display with four selectable units ensures easy reading. The 304L stainless steel wetted material allows for compatibility with a wide range of liquids and gases. With an accuracy of ±0.5% FS for ranges up to 1000 psig (68.94 bar) and ±1% FS for 5000 psig (344.74 bar) range, the gage provides reliable pressure readings.

Dwyer Series WDG is a weatherproof digital pressure gage designed to measure gas and liquid pressure with high accuracy. Its rugged design makes it suitable for outdoor and industrial environments, while the backlit display with four selectable units ensures easy reading. The 304L stainless steel wetted material allows for compatibility with a wide range of liquids and gases. With an accuracy of ±0.5% FS for ranges up to 1000 psig (68.94 bar) and ±1% FS for 5000 psig (344.74 bar) range, the gage provides reliable pressure readings.

Series WDG Weatherproof Digital Pressure Gage
Specifications - Installation and Operating Instructions
Bulletin P-WDG
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]
SPECIFICATIONS
S
ervice: Compatible liquids and gases.
W
etted Materials: 304L SS.
H
ousing Materials: Fiberglass reinforced PP plastic.
Accuracy: ±0.5% FS for ranges up to 1000 psig (68.94 bar); ±1% FS for 5000
psig (344.74 bar) range.
Long Term Stability: ±0.05% FS/year.
Pressure Limits: 2X pressure range; Burst pressure: 3X pressure range .
E
nclosure Rating: IP65.
T
emperature Limits: 14 to 140°F (-10 to 60°C).
T
hermal Effect: 0.04% FS/°C.
Size: 2.5˝ OD.
Process Connections: 1/4˝ male NPT.
Display: 4-digit LCD (1-1/4 x 5/8˝).
Power Requirements: 3 V CR123A lithium metal battery, installed functional,
user replaceable.
Battery Life: 2 to 3 years typ.
Weight: 0.34 lb (0.15 kg).
T
he Series WDG Weatherproof Digital Pressure Gage measures gas and liquid
pressure with high accuracy at an affordable price. Its rugged weatherproof design
stands up to outdoor and industrial environments. The 4-digit backlit display with
four selectable units makes readings easily visible to prevent reading errors. The
WDG comes with 304L stainless steel wetted material for a wide range of
c
ompatible liquids and gases.
L
ocation
Select a location where the gage can be easily read and the temperature will not
exceed 140°F (60°C). The mounting surface to the gage should be free from
excessive vibration. Be sure to use proper thread sealant when installing the gage.
Installation
When installing the gage, always use 7/8˝ hex wrench at the base of the housing
to tighten the gage to a mating fitting. Be sure to use proper thread sealant when
installing. Do not apply wrench to housing.
Key Functions
– On/Off/Unit Change
– Reset Zero/Backlight
Operation
To turn on the gage, press . This button also allows you to scroll through
the units, which are located on the right side of the display. To reset zero, press
and hold for 2 seconds until display re-zeros. Press and hold for 2
seconds to turn off the gage.
Battery Replacement
If the battery is low, the display will show “Lob” and turn off after 3 seconds. To
replace the battery, unscrew the front plastic cover and remove the front LCD plate.
Then remove the battery and replace with a new one, making sure that the (+) and
(-) polarities match.
Calibration
To ensure accurate pressure readings, be sure to zero gage before first use. This
eliminates readings to any change in atmospheric pressure. Only zero gage while
it is disconnected from any fitting. It is recommended to re-zero gage once a year.
Ø
3-9/64
[
Ø79.87]
3-23/32
[94.48]
7/8
[22.15]
1
7/32
[
13.50]
1
-21/32
[
42.10]
Ø2-45/64
[Ø68.83]
5/16
[8.00]
©Copyright 2014 Dwyer Instruments, Inc. Printed in U.S.A. 7/14 FR# R9-444057-00 Rev. 3
ON/U
OFF
RESET
ON/U
OFF
RESET
ON/U
OFF
MAINTENANCE/REPAIR
Upon final installation of the Series WDG no routine maintenance is required. The
Series WDG is not field serviceable and should be returned if repair is needed.
Field repair should not be attempted and may void warranty.
WARRANTY/RETURN
Refer to “Terms and Conditions of Sales” in our catalog and on our website.
Contact customer service to receive a Return Goods Authorization number before
shipping the product back for repair. Be sure to include a brief description of the
problem plus any additional application notes.
  • Page 1 1

Dwyer Series WDG User manual

Dwyer
Brand
Dwyer
Model
Series WDG
Type
User manual

Dwyer Series WDG is a weatherproof digital pressure gage designed to measure gas and liquid pressure with high accuracy. Its rugged design makes it suitable for outdoor and industrial environments, while the backlit display with four selectable units ensures easy reading. The 304L stainless steel wetted material allows for compatibility with a wide range of liquids and gases. With an accuracy of ±0.5% FS for ranges up to 1000 psig (68.94 bar) and ±1% FS for 5000 psig (344.74 bar) range, the gage provides reliable pressure readings.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents