Philips DVP5992 User manual

Category
LCD TVs
Type
User manual

This manual is also suitable for

DVP5990
DVP5992
DVD Video Player
Quick Start Guide
What’s in the box?
DVD Video Player
Remote Control
and 2 AAA batteries
User
Manual
Composite
Audio/Video Cables
VIDEO IN
(CVBS)
1
Connect
Audio and Video
Power
HDMI IN
VIDEO IN
(CVBS)
V (Pr/Cr)
U (Pb/Cb)
Y
COMPONENT
VIDEO IN
Basic Audio/Video Connections
OR
OR
Component Video
(Better Quality)
HDMI
(Best Quality)
OR
RF Modulator
Composite Video CVBS
(Good Quality)
(Cable not supplied)
RF Modulator (not supplied)
RF coaxial cable
not supplied
VIDEO IN
(CVBS)
TV (back)
Video
Power
Audio
DVD Player (back)
TV (back)
Audio and Video
Power
(Cable not supplied)
DVD Player (back)
TV (back)
Audio and Video
Power
TV (back)
DVD Player (back)
DVD Player (back)
dvp5990_5992_37_qsg_eng.indd 1 2008-01-30 12:10:15 PM
3
Enjoy
2
Set up
A
Finding the viewing channel
A Press
1
on this unit to turn it on.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
°
button) until
you see the Video In channel. If you are using a RF
modulator, set the TV to channel 3 or 4.
B
Select the display language on the
screen
A Press SETUP.
The { General Setup Page } appears.
Disc Lock
OSD Language Auto (ENG)
Sleep ENGLISH
Lip Sync FRANÇAIS
Volume ESPAÑOL
Auto Standby
DivX(R) VOD Code
General Setup Page
B Use  keys to select { OSD Language } and press
.
C Use  keys to select a language and press OK to
confirm. (For Philips ‘EasyLink’ TV, { Auto } must be
selected.)
D Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this unit, not
for the DVD disc menu.
There are various setup options (Audio Setup, Video Setup,
Preference) available on this unit. Refer to the user manual
for more information.
A
Start disc playback
A Playback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV, use
 keys to navigate in the DVD menu.
B Press
u
to start playback.
C To stop playback, press
n
.
Troubleshooting
For more troubleshooting tips,
see the user manual.
No power
Check if the AC power cord is properly connected.
Press 1 on the top panel of this unit to turn on the
power.
No picture
Check connection to TV and ensure the plugs are
rmly in place.
No sound or distorted sound
Check audio connections and make sure that the
connected audio device is turned on.
For HDMI connection, check if your TVs HDMI or
Digital setting is set to ON. Contact your TV
manufacturer for detailed information.
Remote control does not work
Check the batteries are loaded correctly or replace
the batteries with new ones.
Reduce the distance between the remote control
and this unit.
Point the remote control directly toward the IR
sensor.
2008 C Philips Consumer Electronics
A Division of Philips Electronics North America Corp
P.O. Box 671539 Marietta, GA 30006-0026
All rights reserved.
Printed in China
sgptt-0805/37_03
Need help?
User Manual
See the user manual that came with your Philips DVD Player.
Online
Register your product and get support at www.philips.com/welcome.
Hotline
Call 1-888-PHILIPS (1-888-744-5477) for our operators.
dvp5990_5992_37_qsg_eng.indd 2 2008-01-30 12:10:17 PM
  • Page 1 1
  • Page 2 2

Philips DVP5992 User manual

Category
LCD TVs
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI