Lenoxx FW90 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Lenoxx FW90 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ELECTRIC FOOT WARMER
OPERATING INSTRUCTION
LENOXX ELECTRONICS AUST PTY LTD
www.lenoxx.com.au Customer Service: 1300 666 848
MODEL NUMBER: FW90
IT CAN WARM UP YOUR FEET IN WET/COLD WEATHER.
HOUSEHOLD USE ONLY.
ATTENTION!!
THIS APPLIANCE IS NOT INTENDED FOR USE BY CHILDREN OR INFIRM
PERSON WITHOUT SUPERVISION
1. Do not insert pins.
2. Do not use if wet or moist.
3. Clean it with dry cloth.
4. Do not disassemble or repair on your own. Please call customer service
Use Method
Lay the warmer onto ground, open the warmer, put your feet into it. Then plug
into power source.
Use of Remote
0=OFF power
1=minimum level heating
2=medium level heating
3=maximum level heating
The remote has 3 heating levels and an indicative lamp, which lights up while
the blanket is in use.
Choose the requested heating level by moving the remote-switch from the
level(1) to level(2) or (3).
While heating on level position(3), the under blanket will reach the maximum
temperature in 30-40 minutes.
If you feel that the temperature is too high once in use, you can switch remote to
level(2)(1) or switch OFF(0)
Disconnect the plug from the power source when is not in use.
/