What Is the AC1?
Installing the AC1 Understanding the Status Lights
The AC1 4-Slot Battery Charger is an accessory for the CK30 and CK31 Handheld
Computers. You use the battery charger to charge up to four AB1 or AB1G batteries at
the same time.
This guide explains how to install and use the battery charger. Before using the AC1,
please read this guide thoroughly and save it for future reference.
What You Need
To use the charger, you need:
• an AC power supply (P/N 073573).
• an AC power cord.
You need to purchase the appropriate power cord for your location. For more information,
contact your Intermec sales representative.
This table explains what the different colors of the Status lights mean.
roloC noitpircseD
rolocoN rewopehterusekaM.rewopgniviecertonsiregrahcyrettabehT
.teltuoCAderewopaotylreporpdet
cennocsiylppus
wolleYydaetS .egrahcotydaersidnarewopCAotdetcennocsiregrahcyrettabehT
neerGgnihsalF.gnigrahcsiyrettabehT
neerGydaetS .degrahcyllufsiyrettabehT
deRgnihsalF:snoitulosesehtyrT.gnigrahctonsiyrettabehT
•
.regrahcehtnidellatsniylmrifsiyrettabehterusekaM
•
CAderewopaotylreporpdetcennocsiylppusrewopehterusekaM
.teltuo
•
C°54dnaC°0neewtebsierutarepmetmoorehterusekaM
.)F°311dnaF°23(
•
stcatnocyrettabehtdna1CAehtnosnipgnigrahcehterusekaM
.naelcerayrettabehtno
You must use the appropriate Intermec power supply with this device or
equipment damage may occur.
Attention: Vous devez utiliser la source d’alimentation Intermec adéquate
avec cet appareil sinon vous risquez d’endommager l’équipement.
AC1 4-Slot Battery Charger Quick Start Guide
1
2
Place the battery charger on a flat, stable, and clean surface that is within 1.5 m
(5 ft) of an AC power outlet.
Connect the AC power supply to the power connector on the battery charger
and to an AC power outlet. The Status light in each button turns on, showing
that the battery charger is ready to use.
To prevent fire or electric shock, do not expose the AC1 to rain or moisture.
Avertissement: Pour éviter des risques d’incendie ou de choc électrique, ne pas
exposer le AC1 à la plui ou l’humidité.
Status light
(4 places)
Power
connector
Button
(4 places)