2. Paradyne
  3. Hotwire 6381
Hotwire 6381

Paradyne Hotwire 6381 Upgrade Instructions

  • Hello! I am an AI chatbot trained to assist you with the Paradyne Hotwire 6381 Upgrade Instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
Hotwire ADSL/R Bridge/Router, Model 6381
Boot Code Upgrade Instructions
Document Number 6381-A2-GK40-00
September 2003
Read This First
Use this procedure if the serial number of your ADSL/R router is below 5774747.
The serial number is located on the bottom of the router. If the serial number is
5774747 or above, you do not need to execute the boot code upgrade.
This procedure requires Microsoft Windows.
Installation Procedure
1. Verify that your router is powered on and connected to your PC.
2. Load the upgrade CD into the CD-ROM drive of your PC.
3. The upgrade should start automatically. If it does start automatically, skip
to Step 4. If it does not start automatically:
• In Windows, click on the Start icon, then select Run. The Run
window appears.
• Click on Browse. The Browse window appears.
• Select bootupgr and click on Open.
• In the Run window, click on OK to start the upgrade process.
2
4. A command prompt window opens, then a second window with the title
Paradyne 6381. This is the Telnet program, which is used to perform the
upgrade.
The Telnet window closes after a few moments. Your router is
automatically rebooted to make the upgrade permanent.
5. Watch the light-emitting diode marked LINE on the faceplate of your
router. When the LED glows solidly green, the upgrade is complete.
6. Close the command prompt window.
/