Deluxe Style Racks
Assembly Guide
Cordless Drill Utility Knife
Finish Nailer
Hammer
Nail Setter
Wood Glue
*Please verify that you have the correct number of parts before proceeding.
Depending on the model you purchased, your bundle should contain the following:
* All models follow the same assembly procedure varying only in the number of middle ladders your rack will require.
Package Contents
tools for assembly
Page 1
or visit
premierwinecellars.com
Questions?
800.921.3716
RACK
36 Bottle
64 Bottle
100 Bottle
144 Bottle
MIDDLE
LADDERS
5
7
9
11
END
LADDERS
2
2
2
2
STANDARD
CONNECTORS
2
2
2
3
SCREWLESS
CONNECTORS
2
2
2
2
SOLID
TOP
1
1
1
1
WOOD SCREWS
FINISH NAILS
WOOD PUTTY
Standard Connector
Screwless Connector
End Ladder
Middle Ladder
End Ladder
Solid Top
Deluxe Style Racks
Assembly Guide
or visit
premierwinecellars.com
Questions?
800.921.3716
Measurements are from
the bottom of the rack to
the top of the connector
IMPORTANT!
Page 2
BACK FRONT
TOP
BOTTOM
25 11/16"
Step 1: Place parts on a flat surface. Begin by attaching the back connectors to the ladders with a cordless drill.
Step 2: Flip rack over. Use brad nailer or provided finish nails to attach front connectors to the ladders.
Use wood glue for added support.
Step 3:
Using a screwdriver, secure the solid top by driving
a wood screw through each wooden stopper piece
into the aligning connector. Repeat this process
until all 4 wooden stoppers have been secured.
*NOTE: If you purchased a 144 Bottle Deluxe Rack, your
unit will come with 1 extra standard connector.
Attach connector to the back of the rack with a
cordless drill or screwdriver.
/
