BaByliss E836XE Owner's manual

Page is loading ...

6

MULTI-PURPOSE TRIMMER

FOR HAIR, FACE AND BODY

1. 32mm blades

Moveable blade:

- Exclusive three-dimensional

etching process: for an

exceptionally sharp cutting

edge.

- CMS (Chrome-Molybdenum-

Stainless Steel): ultra-

hardwearing and 100% stainless

steel blade.

Fixed Blade: Stainless steel

2. 2 cutting guides (2-14mm

and 3-15mm) for hair and

beard

3. 6-position precision guide

(from 0,5 to 3mm) for very

short cuts

4. Shaving head for body + 1

cutting guide (3mm) for a

quick and even shave of all the

parts of your body

5. 18mm shaving head for face

6. 7mm precision blade, to

create precisely contours and

original designs

7. Nose/ear accessory, to

eliminate unwanted nose and

ear hair

8. On/O switch

9. Power indicator light

10. Cleaning brush

11. Charging and storage base

IMPORTANT INFORMATION

REGARDING THE NI-MH

BATTERIES OF THIS UNIT

To obtain and maintain the

longest battery autonomy

possible, allow it to charge

for 16 hours before using it

for the rst time and then

approximately every three

months. Full autonomy of the

unit will only be obtained after

three complete recharge cycles.

CHARGING THE UNIT

1. Remove the trimmer and all

the accessories from the base

and turn the base over. Open

the security tongue, insert the

power cord into the opening

intended for this, pushing it in

rmly and replace the security

tongue. Place the cord in the

groove. Put the base back in

place and connect it to the

mains. (Fig. 1)

2. Place the trimmer (set to OFF)

in the charging base and check

that the charging indicator

light is on.

3. A full charge (16 hours) will

allow you 30 minutes of

autonomous use.

4. Before using the trimmer for

the rst time, allow it to charge

for 16 hours.

5. Subsequent charges should

also be 16 hours.

USE ON THE MAINS

To use the trimmer on the mains,

plug the cord directly into the

unit.

Plug the trimmer, in the OFF

position, into the mains and

switch ON (If the battery is very

weak, wait about 1 minute).

IMPORTANT! Use only the adapter

that is supplied with the trimmer

Ref. E836XE Voltage = 3V – Current

1000mA.

WATERPROOF

For a greater comfort of use, your

E836XE trimmer is waterproof and

can even be used in the shower.

Easy to clean, it guarantees a

maximum hygiene.

ENGLISH

7

ATTACHING AND REMOVING

ACCESSORIES

Make sure that the unit is

switched o before changing the

trimmer head or accessories.

To attach a head, t the base

of the accessory onto the unit

pressing it until you hear a click.

To remove a head, hold the handle

of the unit in one hand and push

up on the head with your free

hand to remove it (Fig.2).

To remove the body comb guide,

push up one side of the comb

(Fig.3).

USING THE CUTTING GUIDES

Very practical, the cutting guide

guarantees equal cutting length.

IMPORTANT: Always attach the

cutting guide BEFORE turning

the trimmer on, and turn it o

before changing the guide.

The cutting length of your E836XE

trimmer is manually adjustable.

To increase the cutting length,

push the cutting guide up.

To reduce the cutting length,

push it down.

The selected length is displayed

at the back of the trimmer.

CUTTING TECHNIQUES AND

ADVICE FROM THE EXPERTS

HAIR

• Use the trimmer on clean, dry

hair.

• To familiarise yourself with the

trimmer, start with a longer

cutting length and gradually

work through the shorter

lengths to the one you want. In

this way you’ll quickly nd the

cutting length that suits you

best.

• Always move the trimmer

against the direction of hair

growth.

• Begin at the nape. Place the

guide on the scalp and move

the trimmer toward the crown of

your head. Move your trimmer

slowly, pointing the teeth of the

guide slightly upward. Keep the

trimmer in contact with your

head at all times. (Fig. 4)

• For the crown of the head, move

from front to back, that is, from

your forehead to the crown of

your head.

• For the nishing touches, that is,

around the nape and sideburns,

use the trimmer without

a cutting guide. Turn your

trimmer over and move it from

top to bottom. (Fig. 5)

• If you want a length greater

than 30 mm, or if you are

experienced, you can create

‘comb’ or ‘nger’ cuts:

- Work without a cutting guide.

- Take up a small section of hair

with a comb or in your ngers.

- Move the comb or your ngers

along the section of hair to the

desired length.

- Cut your hair along the comb or

your ngers.

- Remove the cut hair using a

comb and check the evenness

of the cut regularly. (Fig. 6)

FACE

For the beard or moustache just

the way you want it…

Decide on the type of beard or

moustache that best suits your

face taking into account the size

of your face and natural growth

and thickness of your beard and/

or moustache. After deciding

on the form of the beard and/or

moustache, it is easy to maintain

its appearance by using the

trimmer as soon as you feel it is

necessary. For better results, we

8

recommend cutting the beard

when it is dry. This helps make the

cut precise and comfortable.

To determine the shape of the

beard

After having combed your beard

in the direction of its natural

growth, decide on the desired

shape by starting under the jaw.

Come back up each side towards

the ears. Then continue on your

cheeks towards the hair. Make

sure you always trim or style your

beard against the hair growth.

For an irresistibly soft skin...

The shaving head adapts perfectly

to the contours of your face and

gives even the most dicult parts

a close shave. Result: a neat and

precise cut in less time for an

impeccable look.

Patterning your hair and giving it

a perfect nish

Use the precision trimmer. Your

precision trimmer comes with an

exclusive special short cut blade.

Its narrow size (7mm) enables you

to pattern your hair and beard

with great accuracy.

To eliminate undesirable nose

and ear hairs

Gently insert trimmer head into

the ear or nose and cut the hairs.

NOTE! Only use in the opening of

the nostrils or ears to avoid any

risk of injury.

BODY

Thanks to this shaving head for

body, you can trim or shave any

part of your body quickly and

evenly (chest, stomach, legs, etc.)

The shaving head includes 2

blades. These blades shorten

long hair and allow you to easily

achieve precise shaving.

The cutting guide used with

the shaving head allows you

to determinate the hair length

to 3mm when you don’t want

to shave completely (for ex.

underarms).

MAINTENANCE

Remove the cutting guide after

each use.

Cleaning the trimmer blades

regularly will maintain their

optimal performance.

Removable blades

To make cleaning easier, the

BaByliss trimmer blades can be

removed. Make sure the trimmer

is turned o. Hold the trimmer

with the blades pointing up and

remove them by pressing the top

of the blade. (Fig. 7)

Brush the blades using the

cleaning brush to remove any

hair.

Self-lubricating blades

The blades of your trimmer have

a reservoir pad for releasing the

necessary amount of oil for proper

operation of your trimmers, time

after time. Nevertheless, it is

recommended that it be relled

occasionally when you notice

performance is not as high.

Remove the blades as described

above.

Squeeze a few drops of BaByliss oil

onto the pad (Fig. 8).

Then replace the blades on the

trimmer.

The BaByliss oil is specially

formulated for the trimmer, it

does not evaporate nor does it

slow the blades.

It is possible to obtain replacement

blades when these are worn out

or damaged.

Page is loading ...

BaByliss E836XE, E836XE 10 in 1 Owner's manual

Related papers

Other documents