OKI C711 Series Installation guide

Page is loading ...

C610/C711 Setup Guide

3

Install Software

About the Printer Drivers

PostScript

®

Printer Driver

Use this driver for high-resolution color

graphics applications and pre-press

graphic proofing. This driver also includes

advanced features which may only be

used by a network administrator.

PCL Printer Driver

PCL 5c and PCL6e printer drivers are

included mainly for compatibility with

legacy systems.

XPS PCL Driver for Windows Vista

®

Note: This driver is currently available

only on the Oki web site.

This driver is for use with Vista systems,

if you require Vista premium logo

certification.

You can install and use any of these

drivers depending on your application.

However, each driver must be installed

individually.

Selecting a Printer Driver

Follow the setup instructions for your

system:

• Windows: Network (page 3)

• Windows: USB (page 4)

• Windows: Parallel (page 5)

• Macintosh (page 5)

Then activate any optional accessories:

• Windows (page 6)

• Macintosh (page 6)

Windows

®

: Network Setup

Print the Configuration Sheets

1 Press Enter on the Operator panel.

2 Press the down arrow until Print

Information is displayed.

3 Press Enter.

4 Press the down arrow until Network is

displayed.

5 Press Enter.

6 Execute appears.

7 Press Enter.

Keep these sheets handy: they contain

information you need to set up the

printer on your network.

Install the Driver

1 Insert the CD in the CD-ROM drive. The

CD will autorun.

2 Select your language.

3 Accept the license agreement.

4 Click Install Driver.

5 Select network printer.

6 Select Directly to the network using

TCP/IP.

7 Enter the IP Address. The IP address

can be found on the Configuration

Sheets.

8 Follow the on-screen instructions.

Test the Printer Driver Installation

To make sure the printer driver is

correctly installed, print a page from any

program. Reinstall the driver if the

installation failed.

Using a Web Browser (optional)

Use your web browser to configure print

server and printer menu settings on an

embedded web page.

1 Activate your web browser (Microsoft

Explorer

®/

™, Netscape Navigator™ 4.4

or higher, Mozilla

®

, Firefox

®

).

2 Enter the IP Address for the printer.

(Locate the address on the network

Configuration Sheets.)

3 Click on a tab to select a category.

C610/C711 Setup Guide

4

Install Utilities and Downloads

Note: You must be connected to the

internet to install Internet

downloads.

1 Select Optional Utilities or Internet

Downloads from the CD installer menu

bar.

2 Click on the utilities and downloads you

want to install and follow the

instructions.

Install Documentation

Note: To open the on-line manuals, you

must have Adobe

®

Acrobat

®

Reader

6.0 or higher installed.

1 Select the User Guides tab from the CD

installer menu bar.

2 Click Install User’s Guide.

3 Follow the on-screen instructions to

complete the installation.

4 To view the manuals, click Start ->All

Programs ->OkiData ->C610/C711

User Guide.

Activate Printer Options

You can configure the options manually

or, for TCP/IP network connections, you

can configure the options automatically

using the Two-Way Communications

feature.

To Configure PostScript Driver

Options Automatically

If you have a TCP/IP enabled network,

you can automatically update your

printer driver to reflect the options

currently installed on the printer.

1 Click Start -> Control Panel -> Print-

ers.

2 Right click the OKI C610/C711 icon.

3 Click Properties.

4 Click the Installable Options tab.

5 Select Two-Way Communications.

6 Type the IP address or DNS name.

7 To display the printer’s current default

setting when opened, select Update

Fiery Driver When Opened.

8 Click Update. Click OK.

To Configure PostScript and PCL

Options Manually

1 Click Start -> Control Panel -> Printers

on the Windows task bar.

2 Right-click the printer icon and choose

Properties.

3 Click on the Installable Options tab in

the PS driver or the Device Options tab

in the PCL driver.

4 In the PS driver, scroll to Installable

Options and select options; in the PCL

driver select the appropriate check box

in Available Options.

5 Click OK to activate the current

settings.

Windows: USB Setup

Install the Driver

1 Turn the Printer OFF.

2 Insert the CD in the CD-ROM drive. The

CD will autorun.

3 Select your language.

4 Accept the license agreement.

5 Click Install Driver.

6 Select local printer.

7 when prompted to select the port you

want your printer to use, select USB.

8 When prompted, select your printer

model and then select printer

emulation (PS or PCL).

9 When prompted, connect the USB

cable and switch the printer ON.

Test the Printer Driver Installation

To make sure the printer driver is

correctly installed, print a page from any

program. Reinstall the driver if the

installation failed.

C610/C711 Setup Guide

5

Install Utilities and Downloads

Note: You must be connected to the

internet to install Internet

downloads.

1 Select Optional Utilities or Internet

Downloads from the CD installer menu

bar.

2 Click on the utilities and downloads you

want to install and follow the

instructions.

Install Documentation

Note: To open the on-line manuals, you

must have Adobe

®

Acrobat

®

Reader

6.0 or higher installed.

1 Select the User Guides tab from the CD

installer menu bar.

2 Click Install User’s Guide.

3 Follow the on-screen instructions to

complete the installation.

4 To view the manuals, click Start ->All

Programs ->OkiData -> C610/C711

User Guide.

Windows: Parallel

Connection Setup

Follow the instructions for USB Setup.

During printer driver installation, when

prompted to select the port you want

your printer to use, select LPT1.

Macintosh

®

Setup

Connect the USB cable (if you are

using USB)

Note: Printer operation is not assured if

another USB compatible device is

connected concurrently with it.

1 Turn the printer OFF.

2 Connect the USB cable to the USB port

on the computer, then to the USB port

on the printer.

Install the Printer Driver

1 Turn on the printer, then turn on the

computer.

2 Place CD in the CD-ROM drive.

3 Double-click the CD icon that appears

on the desktop.

4 Open the MAC OSX folder.

5 Open the Driver folder.

6 Select the PS driver installer.

7 Follow the on-screen instructions.

8 Select any utilities you want to install.

Click Install.

Add the Printer

1 Run the Print Center or Print Setup

Utility. Click Add.

2 Click More Printers.

3 Select OKI USB, OKI TCP/IP, or

Rendezvous/Bonjour from the drop-

down menu.

Note: If you are using USB, select OKI

USB and disregard step 4.

4 Enter the printer’s IP address.

5 Select the printer model. Click Add.

6 Quit the Print Center.

Install the Utilities

1 Insert CD in the CD-ROM drive.

2 Double-click the CD icon that appears

on the desktop.

3 Open the MAC OSX folder.

4 Open the Utilities folder.

5 Double-click the utility you want to

install. For more information, see the

Utilities section in the User’s Guide.

6 Follow the on-screen instructions.

Install the Documentation

Note: Adobe

®

Acrobat

®

Reader 6.0 or

higher is required to view the

manuals.

1 Insert the CD into your CD-ROM drive.

2 Double-click the CD icon that appears

on the desktop.

3 Scroll to the C610_C710_UG_ae.pdf

file in the root directory.

To load: drag the .pdf file to the desk-

top

To view: double-click it.

Note: To view without installing, double-

click the file on the CD.

C610/C711 Setup Guide

6

Activate Optional

Accessories

Windows

If your printer has an optional second

paper tray, or duplex unit, you must open

the printer driver and activate the device

(note that some networked computers

will automatically detect accessories).

1 Click Start -> Control Panel -> Printers

on the Windows task bar.

2 Right-click the printer icon and choose

Properties.

3 Click on the Installable Options tab in

the PS driver or the Device Options tab

in the PCL driver.

4 In the PS driver, scroll to Installable

Options and select options; in the PCL

driver select the appropriate check box

in Available Options.

5 Click OK to activate the current

settings.

Macintosh

If your printer has an optional second

paper tray, or duplex unit, you must open

the printer driver and activate the device

(note that some networked computers

will automatically detect accessories).

1 Open System Preferences.

2 Under Hardware, click on the Print &

Fax icon.

3 Click the printer name (C610 or C711)

in the Printer List.

4 With the printer selected, click the

“Printer Setup...” button.

5 From the Printer Info window, select

“Installable Options” from the drop-

down menu.

6 Click or drop-down the settings to

enable the various options.

7 Click Apply Changes to activate the

current settings.

Service and Support

Available 24 hours a day, 7 days a

week.

• Visit our website:

www.okiprintingsolutions.com

• Call 1-800-654-3282.

Page is loading ...

Trademark Information

OKI, OkiLAN ® Oki Electric Industry Company, Ltd. Microsoft, Windows, Windows Vista, Internet Explorer ®/™ Microsoft Corporation in the United States and

other countries. Netscape, Netscape Navigator U.S. ™, Netscape Communications Corporation. Adobe, Acrobat, Acrobat Reader, PostScript ™ Adobe Systems,

Inc. which may be registered in certain jurisdictions. Ethernet ® Digital Equipment Corporation. EtherTalk, LaserWriter, Mac, Macintosh ® Apple Computer, Inc.,

Velcro ® Velcro Industries, Mozilla and Firefox ®/™ Mozilla Foundation.

OKI C711 Series Installation guide

OKI C711 Series Installation guide

in other languages

Related papers

Other documents