INSTRUCTIONS
W34 WALL PACK INSTALLATION
RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install
and end users to save energy
. W
e’
d love to hear your comments. Please call the Marketing Depar
tment at 888-RAB-1000 or email:
[email protected]IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNINGS:
• Make certain power is OFF before installing or maintaining fixture.
NOTE:
• No user maintenance or cleaning required.
CAUTION:
• For proper weatherproof function all gaskets must be seated properly and all screws inserted and tightened firmly. Apply
weatherproof silicone sealant around the edge of the wall box. This is especially important with an uneven wall surface. Silicone
all plugs and unused conduit entries.
Drill Template
Lag Bolt Locations (4) Fig. 1
1. Reflector
Fig. 2
2. Housing
.
3. Housing
4. (see wiring
instructions)
5. Reflector
Fig. 3 (shown on next page)
W3430L/35L W3455L/70L/90L W34150L
Drill Template
Lag Bolt Locations
Housing
Reflector