ACNODES.COM
LW-846 INSTALLATION GUIDE
I.
INSTALLATION
DRIVER
LW-846 provides one Slim type CD-ROM, one 3.5" FDD and two removable HD Kits. The below diagram
shows how to install the disk drives.
Card and Card Clamp
The card clamp is designed to hold the add-on cards to fix securely into the slots and to prevent them
from vibrating
1. Back cover removed first by releasing the screws as the diagram below shown.
2. Unscrew the bottom side of the card clamp and remove it from the top fix hole from the chassis.
3. Slide the card in and carefully press it into the slot of backplane.
4. Adjust holding clamp to hold the card by screws
Slim Type CD-ROM & FDD
Removable HD Kits
ACNODE.COM
LW-846 INSTALLATION GUIDE
Power Supply
Power supply is equipped at the rear of workstation and it is fastened by some screws as the diagram
below shown
Key Pad
TO CPU CARD
V+
CN3
TO TEXT KEYPAD
KBD-01
CK
DA
G
CN1
CN6
181
TO KEYBOARD
G
DA
CK
G
CN5
13
TO FUNCTION KEYPAD
CN4
G
1
1
TO KEYBOARD
V+
G
G
DA
CK
V+
12
CN2
ACNODE.COM
LW-846 INSTALLATION GUIDE
IV.
DIMENSION
IIV.
MOUNTING
Rack Mounting
Panel Mounting
4.0
R3.00
466.0
266.00
251.30
37.00
435.15
482.0
417.00
190.50
76.20
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Gateway SYSMAN017AAUS User manual
-
-
-
-
DeLorme Earthmate GPS PN-60 Quick start guide
-
Miller IHPS II 4 KW Owner's manual
-
XMA Viglen Omnino Pro Assembly Manual
-
Solo 1150 User manual
-
Mettler Toledo DIN Rail Transmitter M100 DR Operating instructions
-
