2. Toro
  3. Roller Shaft Kit, ProStripe 560 Mower

Toro Roller Shaft Kit, ProStripe 560 Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Roller Shaft Kit, ProStripe 560 Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3447-126RevA
RollerShaftKit
ProStripe
®
560Mower
ModelNo.134-6409
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Nopartsrequired
–
Preparethemachine.
Shaft
1
Washer(M6x18)
1
Bolt(M6x25)
1
Installthekit.
Nopartsrequired
–
Finishtheinstallation.
PreparingtheMachine
WARNING
Tippingthemachinemaycausethefuelto
leak.Fuelisammableandexplosive,and
cancausepersonalinjury.
Runtheenginedryorremovethefuelwitha
handpump;neversiphonthefuel.
1.Runtheenginedryorremovethefuelwitha
handpump.
2.Movethemachinetoalevelsurface,shutoff
theengine,waitforallmovingpartstostop,and
allowtheenginetocool.
3.Disconnectthespark-plugwirefromthespark
plug;refertotheOperator’sManualforyour
machine.
©2021—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUK
AllRightsReserved
*3447-126*
InstallingtheKit
1.Ifthegrassbagisonthemachine,removetheit.
2.Removethechaincoverfromthemachinebyremovingthe2chain-coverbolts(Figure1).
Note:Retainthechaincoverand2chain-coverboltsforlaterinstallation.
3.Removeandretaintheexistingcirclip,thrustwasher,sprocket,andchainfromthegearboxpost(Figure1).
g349697
Figure1
1.Gearboxpost5.Circlip
2.Chain6.Chaincover
3.Sprocket7.Chain-coverbolts(2)
4.Thrustwasher
4.Removetherollerandallcorrespondingpartsfromthemachine.
Note:Retainallcorrespondingpartsexcepttheshaft,washer(M6x18),andbolt(M6x25).
5.FillthecamdrivecavitywithgreasethathassuperiorwaterresistancesuchasFuchsRenolitCZ2
greaseorsimilar.
Important:Donotusestandardgreaseasthismayallowmoisturetoreducelubricantefciency.
6.Replacetheshaft,washer(M6x18),andbolt(M6x25)asshowninFigure2.
Note:Applythread-lockingcompoundontheboltandtorqueitto11N·m(8ft-lb).
2
g356632
Figure2
1.Shaft(Qty.1)3.Bolt(M6x25)(Qty.1)
2.Washer(M6x18)(Qty.1)
7.Whenshimmingtherearroller,tightenonlytoremoveendoat.Donottightentothepointwherethe
rollerlocksuportherollerhastoomuchresistancewhenrotating.
3
FinishingtheInstallation
1.Installthepreviouslyremovedchain,sprocket
(10T),thrustwasher(20mm),andcircliponto
thegearboxpostasshowninFigure3.
2.Securethepreviouslyremovedchaincoveronto
themachinewiththe2correspondingbolts
(Figure3).
g349697
Figure3
1.Gearboxpost5.Circlip
2.Chain6.Chaincover
3.Sprocket7.Chain-coverbolts(2)
4.Thrustwasher
4
g356633
Parts
Ref.
PartNumber
Qty.
Description
1134-52531
Rollershaft
2111-76791
Washer(M6x18)
3ZBHIF025U1
Bolt(M6x25)
5
Notes:
Notes:
/