2. CAL Lighting
  3. FX-3770-4

CAL Lighting FX-3770-4 Operating instructions

  • Hello! I have analyzed the Assembly Instructions for the Light fixture FX-3770-4. This document provides a clear sequence of steps for assembling your new light fixture, including how to install the socket assembly and attach the steel ring. I am ready to provide the answers to your questions about the assembly process or the features of the light fixture.
  • What type of bulb should be used?
    Are the bulbs provided?
    What is the first step in the assembly process?
ASSEMBLY INSTRUCTIONS
ITEM NO.: FX-3770-4
C
E
F
B
A
D
B → A → C → D → E → F → Bulb
1. Carefully unpack and identify all parts referring to illustration for parts identification.
2. Turn the power to the installation point OFF.
3. Unfold the fixture arms in place.
4. Place cap (B) over the protruding nipple at top of fixture body (A), securing with fixture loop
(C).
5. Install the socket assembly (D) to the bottom of the center tube of the fixture body (A) as
shown in the diagram, until snug.
6. Attach the steel ring (E) to the fixture body (A) and fix them with screws (F).
7. Referring to the installation instruction with the product for the wiring and installation.
8. Install proper bulbs (not provided) to the sockets referring to the marking and/or labels on
the fixture for maximum wattage.
9. Restore the power to the installation point ON.
10. Assembly is completed. Retain this sheet for future reference.
Use 60Wx4 Max type B BULB (Bulb
not included)
/