V 1.1
US-EN ................................................................................................................. 2
US-ES ................................................................................................................ 15
SilverCrest SMH 6 A2
2 - US-EN
Contents
1. General Information ....................................................................................... 3
1.1 Read and retain the operating manual ......................................................................................... 3
1.2 Explanation of symbols used ......................................................................................................... 3
2. Safety ............................................................................................................. 4
2.1 Intended use ................................................................................................................................... 4
2.2 Safety Instructions........................................................................................................................... 5
3. Package Contents ........................................................................................... 9
4. Technical Data................................................................................................. 9
5. Copyright...................................................................................................... 10
6. Before Initial Use .......................................................................................... 10
7. Initial Use ...................................................................................................... 10
7.1 Inserting the batteries/filling the mill .......................................................................................... 10
7.2 Using the mill ............................................................................................................................... 10
7.3 Changing the grind setting ......................................................................................................... 10
8. Cleaning ....................................................................................................... 11
9. Storing the Device When Not in Use .............................................................. 11
10. Troubleshooting .......................................................................................... 11
10.1 The mill is not working .............................................................................................................. 11
11. Environmental and waste disposal information .......................................... 11
12. FCC hints ..................................................................................................... 12
13. Warranty .................................................................................................... 13
SilverCrest SMH 6 A2
US-EN - 3
Congratulations!
By purchasing the SilverCrest SMH 6 A2 electric salt or pepper mill, you have opted for a high-
quality product.
1. General Information
1.1 Read and retain the operating manual
This operating manual contains important information
regarding the safe use of the device as well as details
on day-to-day use and disposal. Carefully familiarize
yourself with the operating manual, paying special attention to
the safety instructions before using the device, and use it only
for the application areas and purposes described. If you give
the device away or sell it, please ensure that you also pass on
the operating manual. It is part of the product.
1.2 Explanation of symbols used
The following symbols and signal words are used in this
operating manual, on the device, or on the packaging.
This symbol / signal word indicates a threat that poses a high
risk of causing death or severe injury if it is not avoided.
This symbol / signal word indicates a hazard with a medium
level of risk that if not prevented could result in death or serious
injury.
SilverCrest SMH 6 A2
4 - US-EN
This symbol / signal word indicates a hazard with a low level
of risk that if not prevented could result in minor or moderate
injury.
This signal word warns of possible damage to property.
This symbol indicates further information on handling
and use.
DC voltage
This symbol indicates products that have been tested in
relation to their physical and chemical composition and
that in accordance with Directive EC 1935/2004 have
been regarded as harmless to health in terms of contact
with foodstuffs.
2. Safety
2.1 Intended use
This mill is a household device and is only intended for grinding
peppercorns or coarse salt. It should not be used in tropical
climates. The mill is not intended for business or commercial use.
Use the mill solely for private purposes; any other use is
deemed improper. Only use the accessories provided by the
manufacturer.
SilverCrest SMH 6 A2
US-EN - 5
Please observe the national regulations and/or laws in the
respective country of use.
2.2 Safety Instructions
IMPORTANT SAFEGUARDS
Read all instructions.
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. Read all instructions.
2. Close supervision is necessary when any appliance is used
by or near children.
SAVE THESE INSTRUCTIONS
For household use only.
Personal Safety
This product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities
or lacking experience and knowledge unless supervised or
instructed in safe product use by a person responsible for their
safety. Children should be supervised to ensure they do not
play with the product. Children must not play with the device.
Cleaning and user maintenance must not be carried out by
children unless they are supervised. Small parts can be lethal if
swallowed. If a small part is swallowed, medical help should be
sought immediately. Keep the packaging film away from
SilverCrest SMH 6 A2
6 - US-EN
children. Packaging materials are not to be played with.
DANGER! There is a risk of suffocation!
Batteries
If the batteries have leaked, remove them to avoid damaging
the device. You can remove battery acid that has leaked using
a dry absorbent cloth. Wear appropriate gloves while doing
this! Avoid skin contact. If the acid contacts your skin or eyes,
rinse the area immediately with a lot of water and see a
doctor.
Always take care to install your batteries correctly observing
the “+” and “-” marks on the battery and the device.
Always replace the whole set of batteries at one time, taking
care not to mix old and new ones, or batteries of different
types.
Remove discharged batteries from equipment promptly to
avoid possible damage from leakage.
Never dispose of batteries in fire, except under conditions of
controlled incineration. (Failure to observe this precaution may
result in an explosion.)
Never attempt to recharge primary batteries as this may cause
leakage, fire, or explosion.
SilverCrest SMH 6 A2
US-EN - 7
Never short circuit batteries as this may lead to high
temperatures, leakage, or explosion.
Never heat batteries in order to revive them.
Never attempt to disassemble or open batteries as this can
lead to electrolyte burns.
Keep batteries out of the reach of children, especially those
batteries fitting within the limits of the truncated cylinder as
defined in Figure 1.
Figure 1
Small cell or
battery gauge
(inner dimensions)
Immediately seek medical attention if a cell or battery has
been swallowed. Also, contact your local poison control
center.
Fire hazard
Make sure there are no naked flames (for example, burning
candles) placed on or near the mill.
SilverCrest SMH 6 A2
8 - US-EN
Risk of injury
Never open the housing of the mill. There is a risk of injury if
the device is assembled incorrectly. Opening the housing will
void your guarantee.
The mill must not be used if it is damaged. Risk of injury!
Never immerse the mill in water or any other liquid. If liquid
enters into the mill, remove the batteries immediately and
contact the service department (see “Warranty” section).
The mill must not be exposed to direct sources of heat (for
example, heaters), direct sunlight or strong artificial light.
Make sure that the mill is not exposed to excessive shocks or
vibrations.
No foreign bodies should penetrate into the device.
The mill must not come into contact with hot surfaces.
The mill must be filled with peppercorns and coarse salt only.
Keep the mill clean.
SilverCrest SMH 6 A2
US-EN - 9
3. Package Contents
Unpack the mill and all of the accessories. Remove all packaging materials and check all of the
components for completeness and signs of damage. If any parts are missing or damaged, please
contact the manufacturer.
• Mill
• Six batteries
• These operating instructions
This operating manual includes a cover that can be unfolded. The inside of the cover provides a
schematic of the mill and a number legend. This cover page can remain unfolded while you read
other sections of the operating instructions. This provides you with a reference to the controls at all
times. The numbers identify the following parts/functions:
1 Top section
2 Button
3 Motor
4 Contact
5 Contact
6 Container
7 Protective cap
8 Light
9 Adjusting screw
4. Technical Data
Manufacturer TARGA GmbH
Designation SilverCrest SMH 6 A2
Power supply 9 V
Battery type 6 x AAA 1.5 V (Micro, LR03)
Dimensions (H x ∅) approx. 9 ¼ x 2 ¼ in (233 x 55 mm)
Weight approx. 11.29 oz (320 g)
The specifications and design are subject to change without notice.
SilverCrest SMH 6 A2
10 - US-EN
5. Copyright
All contents of this operating manual are subject to copyright law and are provided to the user
solely as a source of information. Any form of copying or reproduction of data and information is
prohibited without the express written permission of the author. This also concerns commercial use
of the contents and data. The text and illustrations correspond to the technical standards at the time
of printing. Subject to alterations.
6. Before Initial Use
Remove the SMH 6 A2 mill and all accessories from the packaging and check the completeness of
the delivery. Keep the packaging material away from children and dispose of it in an
environmentally friendly manner.
7. Initial Use
7.1 Inserting the batteries/filling the mill
• Hold the container (6) firmly and turn the top section (1) anti-clockwise until the arrow on the
top section (1) is lined up with the icon on the container (6).
• Remove the top section (1) from the container (6).
• Remove the motor (3) from the container (6).
• Insert the batteries with the correct polarity (note the + and - signs). The polarity is marked on
the batteries and on the battery compartment.
• Fill the container (6) with peppercorns or coarse salt. Fill the container (6) up no higher than
the padlock icons and .
• Place the motor (3) onto the container (6). Make sure that the contacts (4) of the motor (3) are
positioned on the contacts (5) of the container (6).
• Place the top section (1) onto the container (6).
• Hold the container (6) firmly and turn the top section (1) clockwise until the arrow on the top
section (1) is lined up with the icon on the container (6).
7.2 Using the mill
• Remove the protective cap (7) on the bottom of the container (6).
• Keep the button (2) pressed to activate the mill. The light (8) lights up during operation.
• Replace the protective cap (7) onto the bottom of the container (6) after use.
7.3 Changing the grind setting
• Remove the protective cap (7) on the bottom of the container (6).
• Turn the adjusting screw (9) anti-clockwise slightly for a coarser grind setting.
• Turn the adjusting screw (9) clockwise slightly for a finer grind setting.
• Replace the protective cap (7) onto the bottom of the container (6).
Hard peppercorns can block the grinding mechanism of the grinder. Grains of salt can
also block the grinding mechanism of the grinder due to moisture absorption or their
varying hardness. In this case, turn the grinder upside down and press the button (2) to
release the pepper or salt from the grinder. If necessary, shake the grinder gently to
further support the process.
SilverCrest SMH 6 A2
US-EN - 11
8. Cleaning
WARNING of damage to property
Do not use any scratching or abrasive cleaning agents or abrasive objects (such as a
metal scourer) for cleaning purposes. Otherwise the mill may be damaged.
Do not clean the mill and its accessories in the dishwasher, as this may cause
irreparable damage.
Never immerse the mill in water or any other liquid. No liquid may enter the mill.
• Clean the housing of the mill with a soft, damp cloth, using a mild detergent for stubborn stains.
• Dry all of the parts thoroughly.
• It is not necessary to clean the grinder and the container (6).
9. Storing the Device When Not in Use
If the mill is not going to be used for a longer period of time, store it in a safe, clean and dry place.
• Remove the batteries.
• Empty the container (6).
• Before storing the mill, clean it thoroughly as described in the previous section.
10. Troubleshooting
If the mill does not work as usual, use the following instructions to try and solve the problem. If
working through the following tips does not eliminate the fault, please contact our hotline (see the
“Warranty” section).
10.1 The mill is not working
• The batteries are dead. Please replace the batteries with new ones of the same type. Please
refer to the instructions in the ‘Inserting the batteries/filling the mill’ section.
• The batteries were inserted incorrectly. Please refer to the instructions in the ‘Inserting the
batteries/filling the mill’ section.
11. Environmental and waste disposal information
Disposal of packaging
Sort the packaging before you dispose of it. Dispose of paperboard and cardboard
with the recycled paper service and wrappings with appropriate collection service.
SilverCrest SMH 6 A2
12 - US-EN
Disposing of Used Devices
Do not dispose of used devices together with household waste! If at any time in the
future you should not use this device anymore, please dispose of it in compliance
with the applicable regulation in your state or country. This ensures professional
recycling of used devices and excludes negative consequences for the environment.
Make sure that the disposal is in compliance with local regulations and EPA
recommendations (www.epa.gov).
Questions?
• Call customer service at 1 (844) 543-5872
• Visit the customer service platform on our website at www.lidl.com/contact-us
12. FCC hints
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Please note that changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this device interferes with
radio or television reception, which can be determined by turning the device off and on, the user is
encouraged to resolve this issue by carrying out one or more of the following measures:
• Readjust or relocate the receiving antenna.
• Increase the distance between the device and receiver.
• Connect the device to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for assistance.
SilverCrest SMH 6 A2
US-EN - 13
13. Warranty
3 years limited warranty
What does this warranty cover?
The warranty covers:
• Damage, breakage or inoperability due to defect.
• Damage not caused by normal wear and tear or failure to follow the safety and maintenance
instructions provided in the user manual.
What is not covered by the warranty?
The warranty does not cover damage caused by:
• Normal wear and tear of the product, including fragile parts (such as switches, glass, etc.);
• Improper use or transport;
• Disregarding safety and maintenance instructions;
• Accidents or acts of nature (e.g. lightning, fire, water, etc.);
• Tampering with the product (such as removing cover, unscrewing screws etc.)
Consequential and incidental damages are also not covered under this warranty. However, some
states do not allow the exclusion or limitation of incidental or consequential damages, so this
limitation or exclusion may not apply to you.
What is the period of coverage and warranty resolution?
The warranty is for 3 years from the date of purchase. At our discretion, product will either be
refunded or replaced.
What will we not do?
We will not:
• Start a new warranty period upon product exchange;
• Repair product.
How to process the warranty?
To initiate, please:
• Call customer service at 1 (844) 543-5872
• Visit the Website Customer Service Platform at www.lidl.com/contact-us
or
• Visit a LIDL store for further assistance
To ensure the quickest warranty return process, please have the following available:
• The original sales receipt that includes the date purchased;
• The product and manual in the original package;
• A statement of the problem.
SilverCrest SMH 6 A2
14 - US-EN
What must you do to keep the warranty in effect?
• Retain the original receipt;
• Follow all product instructions;
• Do not repair or modify the product.
How does state law relate to this warranty?
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. All implied warranties are limited by the duration and terms of this warranty. Some
states do not allow limitations on how long an implied warranty lasts, so the above limitation may
not apply to you.
Country of origin: China
SilverCrest SMH 6 A2
US-ES - 15
Índice
1. Información general ..................................................................................... 16
1.1 Lea y conserve las instrucciones de uso .................................................................................... 16
1.2 Explicación de los símbolos usados ........................................................................................... 16
2. Seguridad ..................................................................................................... 17
2.1 Uso previsto ................................................................................................................................. 17
2.2 Instrucciones de seguridad ......................................................................................................... 18
3. Material incluido ........................................................................................... 22
4. Información técnica ...................................................................................... 22
5. Derechos de propiedad intelectual ............................................................... 22
6. Antes de poner en funcionamiento el aparato .............................................. 23
7. Puesta en funcionamiento............................................................................. 23
7.1 Colocar las pilas/llenar el molinillo ........................................................................................... 23
7.2 Uso del molinillo .......................................................................................................................... 23
7.3 Ajustar el grado de molido ......................................................................................................... 23
8. Limpieza ....................................................................................................... 24
9. Almacenamiento cuando no se utiliza ........................................................... 24
10. Resolución de problemas ............................................................................ 24
1.01 El molinillo no funciona ............................................................................................................. 24
11. Información medioambiental y sobre eliminación de desechos .................. 24
12. Indicaciones de la FCC ................................................................................. 25
13. Garantía ..................................................................................................... 26
SilverCrest SMH 6 A2
16 - US-ES
¡Felicidades!
Con la compra del molinillo eléctrico de sal o pimienta SilverCrest SMH 6 A2 ha elegido un
producto de primera calidad.
1. Información general
1.1 Lea y conserve las instrucciones de uso
Este instructivo de uso contiene información importante
relacionada con el uso seguro del aparato, así como
detalles sobre su uso cotidiano y su eliminación.
Familiarícese con el instructivo de uso, ponga atención especial
a las instrucciones de seguridad antes de usar el aparato, y
úselo solo para las áreas de aplicación y los fines descritos. Si
cede el aparato o lo vende, asegúrese de ceder también el
instructivo de uso. Es parte del producto.
1.2 Explicación de los símbolos usados
Los siguientes símbolos y palabras claves se usan en este
instructivo de uso, en el aparato o en el empaque.
Este símbolo/esta señal indica una amenaza que representa un
alto riesgo de muerte o lesiones graves si no se evita.
Este símbolo/palabra clave indica peligro con un nivel medio
de riesgo que, de no evitarse, podría ocasionar una lesión
grave o incluso la muerte.
SilverCrest SMH 6 A2
US-ES - 17
Este símbolo/palabra clave indica peligro con un nivel bajo de
riesgo que, de no evitarse, podría ocasionar una lesión menor
o moderada.
Esta palabra clave advierte sobre un posible daño material.
Este símbolo indica mayor información sobre el manejo
y el uso.
Voltaje de CC
Este símbolo identifica a aquellos productos que han
sido probados debido a su composición física y química
y que, según establece el reglamento CE 1935/2004,
su contacto con los alimentos no plantea problemas
para la salud.
2. Seguridad
2.1 Uso previsto
Este molinillo es un electrodoméstico y se debe utilizar
exclusivamente para moler granos de pimienta o de sal gorda.
No se debe utilizar en regiones de clima tropical. Tampoco
está previsto el uso del molinillo en empresas o de modo
comercial. Utilice el molinillo solamente en el ámbito privado;
cualquier otra utilización se considera un uso indebido. Utilice
solo los accesorios suministrados por el fabricante.
SilverCrest SMH 6 A2
18 - US-ES
Respete las normas aplicables en cada caso a escala nacional
o las leyes del país en el que se utilice el aparato.
2.2 Instrucciones de seguridad
MEDIDAS DE SEGURIDAD IMPORTANTES
Lea todas las instrucciones.
Al usar aparatos eléctricos, siempre se deberán seguir las
precauciones básicas de seguridad, incluyendo las siguientes:
1. Lea todas las instrucciones.
2. Se necesita supervisión cercana cuando los niños utilicen el
aparato o se utilice cerca de ellos.
CONSERVE ESTAS INSTRUCCIONES
Para uso doméstico únicamente.
Seguridad personal
Este producto no está diseñado para ser usado por personas
(incluyendo niños) con capacidades físicas, sensoriales o
mentales reducidas, o sin la experiencia y el conocimiento, a
menos de que reciban supervisión o instrucciones relacionadas
con el uso seguro del producto por parte de una persona
responsable de su seguridad. Se deberá supervisar a los niños
para asegurarse de que no jueguen con el producto. Los niños
no deben jugar con el aparato. Los niños no deberán llevar a
cabo la limpieza o el mantenimiento, a menos de que estén
bajo supervisión. Las piezas pequeñas pueden ser mortales si
son ingeridas. Si se ingiere una pieza pequeña, busque ayuda
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
