Club 3D CSV-1566 Quick Installation Guide

Type
Quick Installation Guide
Thank you for purchasing our CSV-1566 Product.
After unpacking the product, please make sure you have all the
items provided and checked for any damages. In case of any missing/
damaged parts please inform your supplier immediately.
You should have:
• CSV-1566 Docking Station
• PowerSupply 120W
• 1x USB TypeC cable, 1x connection to Host(1m / 3.28ft) M/M
• Quick Install Guide
Please make sure your Host System has the latest drivers updates
installed from our website www.Club-3d.com you can find whether
you need drivers under the product code : CSV-1566 Downloads on
our website.
1. Please connect the black USB type C cable and connect it to the
connector on the Dock marked “To Host” , connect the other side
of that cable to the USB Gen1 Type-C port of your NoteBook/Host
system.
2. Connect your preferred Display(s) to the designated connector(s)
and power on your Display unit(s) , peripherals, ethernet and/or
sound devices
3. Connect the Power cable from the Power Charger into the
designated, DC in, connector on the Dock.
4. Now Plug the Power Supply in a wall socket and switch the Dock
ON, the Purple indicator should be lit !
Note: The indicator on the Dock is BLUE when in Stand-By mode !
No need to connect your Host system to the Power Charger, our Dock
will Dynamically Charge your Host system up to 80Watts.
You’re ready to start working and enjoy the full benefits of our Dock.
CSV-1566 QUICK INSTALLATION GUIDE
USB type C cable
Bottom design:
which allows to put this
dock underneath the host.
PowerSupply 120W
CSV-1566
CSV-1566 QIG Rev. September-2021
For any Questions please check our forum section on our website www.club-3d.com
USB-A
Smart
Charging
Connect DC in
to adapter
USB-C To Host
Connect the USB
Type C cable to
your laptop
  • Page 1 1

Club 3D CSV-1566 Quick Installation Guide

Type
Quick Installation Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI