2. meitav-tec
  3. M5001-24-4x0-10VDC

meitav-tec M5001-24-4x0-10VDC Owner's manual

  • I have read the operating manual for the meitav-tec thermostat M5001-24V-4x0-10V. This document provides detailed instructions on how to control the thermostat's various settings, such as adjusting humidity, temperature setpoints, window, and differentials. I'm ready to help you with any questions you might have about the thermostat.
  • How do I turn the thermostat ON or OFF?
    How can I adjust the humidity set-point?
    What is the humidity/dehumidity window adjustment?
    What is the temperature differential adjustment?
Date:
Title:
No.Revision Date File name: M5001-24V-4X0-10V.VSD
Drawn: P.Rechtman
Checked: A.Star
Approved: E.Roy
M5001-24V-4x0-10V
27 Dec 2006
GHU-ROOM
+-C0TT1T1 RH RALALNYWTRH 0DHHM
+
-
R
N
M5001-24V-4x0-10V
24VAC
Heat 0-10 VDC
Cool 0-10 VDC
Humidifier 0-10 VDC
Dehumidifier 0-10 VDC
Common - Neutral
Not in useNot in useNot in use
Operating Manual / Technician Settings
Turning the thermostat ON or OFF
Press the ON/OFF button to turn the thermostat ON or OFF.
Adjusting Humidity Set-point
Press the HUM button – the humidity set-point will flash.
Using the “+” and “-“ buttons adjust the humidity set-point (range
20...90 %RH)
Press the HUM button again to return to normal display.
Adjusting the Humidity/Dehumidity Window
Press the left WINDOW button – the humidity/dehumidity window
will flash.
Using the “+” and “-“ buttons adjust the humidity/dehumidity
window (range 0...5 %RH).
Press the WINDOW button again to return to normal display.
Adjusting the Humidity/Dehumidity Differential
Press the left PB button – the humidity/dehumidity differential will
flash.
Using the “+” and “-“ buttons adjust the humidity/dehumidity
differential (range 2...10 %RH).
Press the PB button again to return to normal display.
Adjusting Temperature Set-point
Press the HUM button – the humidity set-point will flash.
Using the “+” and “-“ buttons adjust the humidity set-point (range
10...45oC)
Press the HUM button again to return to normal display.
Adjusting the Temperature Window
Press the right WINDOW button – the temperature window will
flash.
Using the “+” and “-“ buttons adjust the temperature window
(range 0...2oC).
Press the WINDOW button again to return to normal display.
Adjusting the Temperature Differential
Press the right PB button – the temperature differential will flash.
Using the “+” and “-“ buttons adjust the temperature differential
(range 2...5oC).
Press the PB button again to return to normal display.
0V
10V
Output
voltage
window
differential
Set-point
window
differential
%Hum.
DEHUMIDIFIERHUMIDIFIER
meitav-tec
Tel: +972-3-9636462
Fax: +972-3-9626620
e-mail: support@meitavtec.com
Fuse 0.2A
Print name: ERT2000/TOS_LIGHT
/