2. Unity
  3. Comp Series Mount Optic Mounts And Platforms

Unity Comp Series Mount Optic Mounts And Platforms User manual

  • Hello! I have reviewed the user manual for the COMP SERIES Mount by UNITY Tactical. This document provides guidance on the proper installation and use of your mount, specifically highlighting the need for a T25 bit driver and a 25 IN-LBS torque limit. I'm here to answer any questions you may have.
  • What type of bit driver should I use?
    What is the maximum torque I should apply?
    Can I use a standard ADM nut?
©Copyright 2021, UNITY Tactical. All Rights Reserved.
COMP SERIES MOUNT
Secure screws using a T25 bit driver.
Lightly snug all screws before applying
final torque to any. DO NOT EXCEED 25
IN-LBS.
1
WARNING: Over-torquing fasteners can damage your mount and will not be covered by warranty.
2Optional ADM Quick Detach Lever (sold
separately) can be installed in place of
rail grabber. Installation instructions are
included with lever.
Compatible ADM QD Lever Kit with
proprietary nut (see reference image)
available exclusively from Unity Tactical
and their dealers.
USING A STANDARD ADM NUT COULD DAMAGE YOUR
MOUNT AND WILL VOID WARRANTY.
©Copyright 2021, UNITY Tactical. All Rights Reserved.
COMP SERIES MOUNT
WARNING: Over-torquing fasteners can damage your mount and will not be covered by warranty.
/