Lumens CT-I30 User manual

Brand: Lumens

Model: CT-I30

Type: User manual

Put hand screw

through the

horizonital

metal plate

Acomplished

Assembled the

grommet set

between both sides

of the table hole

Remove the

waterproof cover

then put the rubber

Use the tool 

to lock arm

When the base and arm joints are loose, use the long side of tool  to lock arm.

Body Tool Tool

Cable

Management RubberBase

x1 x1 x1 x1 x2x2

Key

EVA

Important

＊

Please activate your warranty at www.MyLumens.com/reg

＊

To ensure successful installation, please be sure to follow each

of the following steps.

＊

To download the latest version of Quick Start Guide, multilingual

user manual, software, or driver, etc., please visit LumensTM

http://www.Mylumens.com/support.php

www.MyLumens.com

1. Accessories

CT-I30 Installation Guide

2. Arms Installation

3. Pad Installation

Caution: Claws can only be adjusted in “unlock” position do not try to adjust the claws in “lock” position.

Use key to unlock the security lock Unlock the claw lock

Pull out each fixed claw to extend position Place pad product

Push the claws toward PAD to be fixed and locked

by switch, then press the knob in the security

lock position

Additional EVA cushion available

in the package for thinner devices

Paste EVA cushion to the

indicated position on the holder

5. Cable Route

Use cable management

to manage the cable

when charging or

synchronizing .

4. Charging

All products are adjusted to the most suitable tension

before leaving the factory,do alter unless necessary.

Screws/hinges during usage will loose, use the tool kit

included to tighten them.

7. Tension Adjustment

6. Features

Lumens CT-I30 User manual

Lumens CT-I30 User manual

Related papers

Other documents