2. Lumens
  3. CT-I30

Lumens CT-I30 User manual

  • Hello! I've reviewed the provided Installation Guide for the Lumens CT-I30 pad mount. This document details the step-by-step process for setting up your device, from unpacking the accessories and installing the mounting arms to securing your pad and managing cables. It also highlights the claw lock safety feature and tension adjustments. I'm ready to answer any questions you might have regarding this guide and the device.
  • Where can I find the latest version of the Quick Start Guide?
    In which position claws can be adjusted?
    What should I do if the base and arm joints are loose?
Put hand screw
through the
horizonital
metal plate
Acomplished
Assembled the
grommet set
between both sides
of the table hole
Remove the
waterproof cover
then put the rubber
Use the tool
to lock arm
When the base and arm joints are loose, use the long side of tool to lock arm.
Body Tool Tool
Cable
Management RubberBase
x1 x1 x1 x1 x2x2
Key
x1
x1
EVA
Important
＊
Please activate your warranty at www.MyLumens.com/reg
＊
To ensure successful installation, please be sure to follow each
of the following steps.
＊
To download the latest version of Quick Start Guide, multilingual
user manual, software, or driver, etc., please visit LumensTM
http://www.Mylumens.com/support.php
www.MyLumens.com
1. Accessories
CT-I30 Installation Guide
2. Arms Installation
3. Pad Installation
Caution: Claws can only be adjusted in “unlock” position do not try to adjust the claws in “lock” position.
Use key to unlock the security lock Unlock the claw lock
Pull out each fixed claw to extend position Place pad product
Push the claws toward PAD to be fixed and locked
by switch, then press the knob in the security
lock position
Additional EVA cushion available
in the package for thinner devices
Paste EVA cushion to the
indicated position on the holder
5. Cable Route
Use cable management
to manage the cable
when charging or
synchronizing .
4. Charging
All products are adjusted to the most suitable tension
before leaving the factory,do alter unless necessary.
Screws/hinges during usage will loose, use the tool kit
included to tighten them.
7. Tension Adjustment
6. Features
/