2. Infocus
  3. INF8620AG

Infocus INF8620AG, INF6533e, JTouch65WMTTB User guide

  • Hello! I've analyzed the provided technical documentation for InFocus display models including INF5512AG, INF5522AG, INF7510AG, INF7520AG, INF7530AG, INF7530eAG, INF8610AG, INF8620AG, INF8630AG, and INF8630eAG. This document primarily focuses on the RS-232 communication protocol, outlining configuration settings, cable requirements, timing delays between commands, and listing the available control, query and discrete source command. Feel free to ask any questions related to this document, I'm ready to help.
  • What is the baud rate for RS-232 communication?
    What type of cable is required for RS-232 connection?
    Is there a delay needed after a power off command?
    Is there a delay after a source change?
Applies to INF5512AG, INF5522AG, INF7510AG, INF7520AG, INF7530(e)AG,
INF8610AG, INF8620AG, and INF8630(e)AG models
Introduction:
RS-232 is a communication protocol that can be used to send commands and retrieve status information from the unit
and other RS-232 enabled devices. This is often used in conjunction with a control system capable of managing several
other systems such as audio, lighting, and video switching systems.
Configuration:
Setting
Value
Bits per second
38400 baud rate
Data Bits
8
Parity
None
Stop bits
1
Flow Control
None
Required Cable:
Straight through DB9 cable – male to female
Minimum timing requirements:
•300ms between commands
•10ms character delay
•20 second delay after a Power Off is initiated
•1 second delay after a source change is initiated
•When displaying the Android (Home) screen, you must use the Exit Android command first before using a
discrete source command.
/