2. SCE
  3. SCE-20XEL2108LP

SCE SCE-20XEL2108LP Installation Information

  • Hello! I'm a chat assistant and I've reviewed the provided installation manual for the Saginaw Control swing panels, models SCE-ELSP3 and SCE-ELSP. This document details the installation process, intended use cases, and features like the 115-degree swing and compatibility with different subpanels. I'm prepared to answer any questions you might have about these swing panels based on the information provided in the document.
  • What is the intended use case for SCE-ELSP3?
    What is the intended use case for SCE-ELSP?
    What is the approximate swing of the panel?
    What material is the panel made of?
    Are the panel kits compatible with flat subpanels?
SWING PANEL SCE-ELSP3
1
SPEC-ELSP-GREATER-16H-INSTMAN
Top of the enclosures
2.38” from
top & bottom
SCE concealed
hinge
D
oor
Jam nuts
E
nclosure
SCE
Use existing hinge
bolts to secure
both swing panel
and door hinges
Note hinge tab
orientation
Identical panel size
example SCE-24P24
D - 2.30”
D
2.50” from panel face
to inside of the door
A
B
H - 3.00”
H
W
W - 3.00”
Ø.218”
2plcs
Catch
Washers
S
wing panel
Cam lock
latch
.50” from I.D. of flange
1. SCE-ELSP3 is intended for concealed hinge enclosures that are > 16.00” in
height. For enclosures <=16.00” use SCE-ELSP.
2. P
anel swing is approximately 115°.
3. P
anel construction is 11GA H.R.S.
4. P
anel kit concealed hinges bolt in behind existing concealed hinges on
enclosures and required 2 additional holes to be drilled in the flange on the
latching side for catches.
5. P
anel kits are compatible with flat or bent subpanels. Panel is NOT included with kit.
2.38” from
top & bottom
Drill
Ø.218”
2plcs
Top &
Bottom
/