2. SCE
  3. SCE-24EL2012SS6LP

SCE SCE-24EL2012SS6LP Installation guide

  • Hello! I've reviewed the installation instructions for the Saginaw Control & Engineering Dead Front Panel Wallmount. This document provides detailed information about the panel's construction, installation process, and key features such as its 120-degree swing capability and 14GA carbon steel build. I'm ready to answer any questions you may have about this product.
  • What material are the dead front panels made of?
    How far can the dead front panels swing?
    Do I need to drill additional holes to install the panel?
    How do these panels attach to the enclosure?
X
X
2.50 FROM PANEL FACE
TO INSIDE OF THE DOOR
APROX. 2.59
FROM THE EDGE
OF THE OPENING
.50
FROM
OPENING
.50 FROM
OPENING
SAGINAW CONTROL & ENGINEERING
DEAD FRONT, WALLMOUNT, INSTALLATION
NOTES:
1. DEAD FRONT PANELS ARE ABLE TO SWING 120
2. CONSTRUCTION IS 14GA. CARBON STEEL.
3. PANELS BOLT BEHIND EXISTING CONCEALED HINGES
AND REQUIRE 1 ADDITIONAL HOLE DRILLED PER CATCH.
DEAD FRONT PANEL HEIGHT = ENCLOSURE OPENING - 1.50
DEAD FRONT PANEL WIDTH = ENCLOSURE OPENING - 0.693
DRILL
.218
HOLE FOR
EACH CATCH
VIEW SHOWN WITH BOTTOM REMOVED
AB
DETAIL A
SCE
CONCEALED
HINGE
DOOR
DEAD FRONT
PANEL
USE EXISTING HINGE
SCREWS TO SECURE
BOTH DEAD FRONT
AND DOOR HINGES
SCE
CONCEALED
HINGE
ENCLOSURE
JAM NUTS DETAIL B
CATCH
BRACKET
ENCLOSURE
SECTION X-X
DEAD FRONT
PANEL
CATCH
BRACKET
10-32
BUTTON
HEAD TORX
SCREW
SEALING
WASHER
EXPLODED HINGE
DETAIL
/