SCE SCE-12EL1206LP Installation Information

Type
Installation Information
SWING PANEL SCE-ELSP3
1
SPEC-ELSP-GREATER-16H-INSTMAN
Top of the enclosures
2.38from
top & bottom
SCE concealed
hinge
D
oor
Jam nuts
E
nclosure
SCE
Use existing hinge
bolts to secure
both swing panel
and door hinges
Note hinge tab
orientation
Identical panel size
example SCE-24P24
D - 2.30
D
2.50” from panel face
to inside of the door
A
B
H - 3.00
H
W
W - 3.00
Ø.218
2plcs
Catch
Washers
S
wing panel
Cam lock
latch
.50from I.D. of flange
1. SCE-ELSP3 is intended for concealed hinge enclosures that are > 16.00” in
height. For enclosures <=16.00” use SCE-ELSP.
2. P
anel swing is approximately 115°.
3. P
anel construction is 11GA H.R.S.
4. P
anel kit concealed hinges bolt in behind existing concealed hinges on
enclosures and required 2 additional holes to be drilled in the flange on the
latching side for catches.
5. P
anel kits are compatible with flat or bent subpanels. Panel is NOT included with kit.
2.38from
top & bottom
Drill
Ø.218
2plcs
Top &
Bottom
  • Page 1 1

SCE SCE-12EL1206LP Installation Information

Type
Installation Information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI