2. Home
  3. Do-It-Yourself tools
  4. Power tools
  5. Soldering irons
  6. HOZAN
  7. K-140 / K-141 / K-142

HOZAN K-140 / K-141 / K-142 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the HOZAN K-140 / K-141 / K-142 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTRUCTION MANUAL
HOZAN Polishing Pad is made of rubber with three
abrasive grain sizes available.
The abrasive grain size is indicated by the number
following the product name (the larger the number the
more microscopic). #320 is equivalent to 260 by ANSI.
Select the proper grain size according to the intended
use.
Check the abrasive grain size and do
a trial on an inconspicuous area
before use.
Cleaning soldering iron tips blackened
with oxidation films ‒
‒‒
‒
Cleaning hard plastic surfaces (except
soft plastics) and coated surface ‒
‒‒
‒
Featuresᴾ
ᴾᴾ
ᴾ
Gently removes oxidation films with minimum
damage to the iron tip.
Unlike paste type polishers, this has no un-
pleasant odor.
Polishes uniformly since composition of
abrasive grains is dense.
ᴾ
ᴾᴾ
ᴾSpecificationsᴾ
ᴾᴾ
ᴾ
Material
Dimensions
Abrasive grain size
Foaming NBR containing abrasive
Heat-resistant temp. 60-70 C
50 25.5 20 mm
320 (equivalent to 260 by ANSI)
K-142
Caution
1-2-12 Saiwaicho, Naniwa-ku, Osaka 556 -0021, Japan
ht tps://www.hozan.co.jp/E/ E-mail th@hozan.co.jp
23.09
/