2. Home
  3. Do-It-Yourself tools
  4. Power tools
  5. Soldering irons
  6. HOZAN
  7. K-140 / K-141 / K-142

HOZAN K-140 / K-141 / K-142 Owner's manual

  • Hello! I'm your assistant and I've read the instruction manual for the HOZAN Polishing Pad K-142. This manual provides information on how to use the polishing pad to clean soldering iron tips and hard plastic surfaces. It uses a 320 grit abrasive material and is designed to minimize damage while removing oxidation, it is also odorless. I'm ready to answer any questions you have!
  • What is the abrasive grain size of the polishing pad?
    What materials is the polishing pad made of?
    What is the heat-resistant temperature of the polishing pad?
    What are the dimensions of the polishing pad?
INSTRUCTION MANUAL
HOZAN Polishing Pad is made of rubber with three
abrasive grain sizes available.
The abrasive grain size is indicated by the number
following the product name (the larger the number the
more microscopic). #320 is equivalent to 260 by ANSI.
Select the proper grain size according to the intended
use.
Check the abrasive grain size and do
a trial on an inconspicuous area
before use.
Cleaning soldering iron tips blackened
with oxidation films ‒
‒‒
‒
Cleaning hard plastic surfaces (except
soft plastics) and coated surface ‒
‒‒
‒
Featuresᴾ
ᴾᴾ
ᴾ
Gently removes oxidation films with minimum
damage to the iron tip.
Unlike paste type polishers, this has no un-
pleasant odor.
Polishes uniformly since composition of
abrasive grains is dense.
ᴾ
ᴾᴾ
ᴾSpecificationsᴾ
ᴾᴾ
ᴾ
Material
Dimensions
Abrasive grain size
Foaming NBR containing abrasive
Heat-resistant temp. 60-70 C
50 25.5 20 mm
320 (equivalent to 260 by ANSI)
K-142
Caution
1-2-12 Saiwaicho, Naniwa-ku, Osaka 556 -0021, Japan
ht tps://www.hozan.co.jp/E/ E-mail th@hozan.co.jp
23.09
/