WaterWorks ESB010 Installation guide

WaterWorks
Brand
WaterWorks
Model
ESB010
Type
Installation guide

This manual is also suitable for

PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM PAGE 1 OF 1 | UPDATED ON 1.11.2023
INSTALLATION GUIDELINES
WALL MOUNTED CORNER SHOWER BASKET
3. Using the SCREWS provided, securely install the
SOAP BASKET.
2. Using the previous marks as a reference:
a. Drill pilot holes to accommodate the SCREWS
provided if mounting directly into stud/blocking
material or,
b. Drill holes to accommodate the ANCHORS
provided if not mounting directly into stud/
blocking material.
1. Dry-fit the product to the finished wall and mark
the ideal location for installation.
IMPORTANT:
¾To ensure this product is installed properly, you must read and follow these guidelines.
¾The owner/user of this product must keep this information for future reference.
¾This product must be installed by a professional licensed contractor. Inspect this product
to ensure you have all the parts required for proper installation.
¾DRYWALL ANCHORS, intended for use in a typical 1/2” drywall installation, are provided.
Do NOT use the ANCHORS if mounting directly onto wood blocking or a stud.
¾If further assistance is required, please contact Product Support at 1-800-927-2120 Monday
through Friday, 8am – 6pm EST.
TECHNICAL DETAILS:
DETAIL SPECIFICATION
PRIMARY MATERIAL BRASS
ESSENTIALS WALL MOUNTED CORNER SHOWER BASKET
STYLES
ESB006 [SHOWN] ESB008 ESB010
FINISHED WALL
* DRY-FIT AND MARK LOCATION PRE-DRILLED
HOLES
DRY FIT
ANCHORS
ANCHORS
SOAP
BASKET
SCREW
SCREW
  • Page 1 1

WaterWorks ESB010 Installation guide

WaterWorks
Brand
WaterWorks
Model
ESB010
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents