2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Peerless
  6. ACC 830

Peerless ACC 830, AV ACC 830 User manual

  • Hello! I have analyzed the provided installation instructions for the Peerless Adapter Mount ACC 830. This document details the steps for secure mounting and side-to-side adjustment of the adapter using socket pin screws. I'm ready to answer any questions you may have regarding this installation process.
  • What is the purpose of the adapter bracket?
    How is side-to-side adjustment accomplished?
    What size is the included socket pin screw?
ISSUED:01-08-01 SHEET#: 055-9075-3 08-06-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 1
IMPORTANT! Read entire instruction sheet before
you start installation and assembly.
Installation and Assembly - Side to Side Adapter Mount Models: ACC 830
Description
A bracket
BLCD flush mount tube
C#10-32 x 1/8 socket pin screw
D#10-32 x 3/8 socket pin screw
Parts List Qty.
1
1
1
1
Part Number
055-1184
580-0004
520-1106
520-1084
Note: Actual parts may appear slightly different than illustrated.
Before you start check the parts list below to
make sure all of the parts shown are included.
Attach adapter bracket (A) to bottom exten-
sion column (sold separately). Thread flush
mount tube (B) into bracket (A) as shown until
it is threaded all the way down.
A
B
D
B
Side to side adjustment is accomplished by
rotating adapter bracket (A) about extension
column. Lock into position by screwing 1/8"
long socket pin screw (C) into hole as shown,
jamming screw into threads. For extra
security, align one of the three holes in
adapter bracket (A) with notch in column,
then fasten 3/8" long socket pin screw (D)
into hole and through notch.
Note: The socket pin tool is sold with the
Vector Pro projector mount.
Extension Column
(sold separately)
A
DC
C
Notch
PJC unit or
Accessories
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
• Installer must verify that the ceiling will safely support
four times the combined weight of all attached equip-
ment and hardware.
WARNING
/