Cablibre Cables IRHDMIKIT User manual

Brand: Cablibre Cables

Model: IRHDMIKIT

Type: User manual

Cablibre Cables IRHDMIKIT allows you to control devices hidden from view or out of IR range by extending IR signals over existing HDMI cables. Connect the IR emitter to the source device and the IR receiver to the destination device. Enjoy convenient control without the hassle of direct line-of-sight. Ideal for home theater setups, conference rooms, and more.

IR over HDMI Extender Kit (IRHDMIKIT)

OPERATING INSTRUCTIONS

OVER

HDMI

KIT

Please read these instructions carefully before use and retain for future reference.

IMPORTANT SAFETY INFORMATION

When using electrical appliances basic safety precautions should always be followed.

• To prevent fire or shock hazard, do not expose this product to rain or moisture.

• Turn the power off all source and destination equipment before making the

connections.

OVERVIEW

• IRHDMIKIT is a simple and effective kit that allows you to send IR signals to remote

devices over existing HDMI cabling.

• Easily maintain control over source devices via the original IR remote control.

• Ideal for installations where devices are out of sight or IR range.

WHAT’S IN THE BOX

• 2 x HDMI repeater cables with IR break out.

• 1 x 3m twin IR emitter cable.

• 1 x 1.5m IR receiver cable.

• User Manual.

INSTALLATION

• Connect the male HDMI plug on the repeater cable to the HDMI output from the

source device.

• Connect the IR emitter to the red break out socket on the repeater cable.

• Locate the sensor close to the source equipment IR receiver.

• Connect the main HDMI connection lead to the female socket on the repeater cable.

• Connect the male HDMI plug on the repeater cable to the HDMI input on the

destination device.

• Connect the IR receiver to the red break out socket on the repeater cable.

• Locate the IR sensor so it is in line of sight to the remote control to be used.

• Connect the main HDMI connection lead to the female socket on the repeater cable.

SYSTEM DIAGRAM

SPECIFICATIONS

• IR frequency range: 20kHz - 60kHz

• Up to 10m IR receiver range

• Plug and play connections and setup

• Bi-directional design, either lead can accept IR receiver

• IR receiver cable length: 1.5m

• IR emitter cable length: 3m

• Bi-directional – both repeater cables are identical and can be used at either end of

the equipment link

• Powered by HDMI connection

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC EQUIPMENT.

When this product has reached the end of its life it must be treated as Waste Electrical & Electronic Equipment (WEEE). Any WEEE marked products

must not be mixed with general household waste, but kept separate for the treatment, recovery and recycling of the materials used.

Contact your local authority for details of recycling schemes in your area.

Made in Taiwan PR2 9PP Man Rev 1.2

Cablibre Cables IRHDMIKIT User manual

Cablibre Cables IRHDMIKIT User manual

Cablibre Cables IRHDMIKIT User manual

Other documents