PRO SIGNAL PSG3401 Operating instructions

Brand
PRO SIGNAL
Model
PSG3401
Type
Operating instructions
IR Repeater over HDMI Kit
PSG3401
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
• To prevent fire or shock hazard, do not expose this product to rain or moisture.
• Turn the power off all source and destination equipment before making the
connections.
The terms HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
INSTALLATION
WHAT’s IN THE BOX
• Simple and effective kit that allows you to send IR signals to remote devices over
existing HDMI cabling.
• Easily maintain control over source devices via the original IR remote control.
• Ideal for home cinema or commercial installations where devices are out of sight.
• 2 x HDMI repeater cable with IR break out.
• 1 x twin IR emitter.
• 1 x IR receiver.
• User Manual.
OVERVIEW
• Connect the male HDMI plug on the repeater cable to the HDMI output from the
source device.
• Connect the IR emitter to the red break out socket on the repeater cable.
• Locate the sensor close to the source equipment IR receiver.
• Connect the main HDMI connection lead to the female socket on the repeater
cable.
• Connect the male HDMI plug on the repeater cable to the HDMI input on the
destination device.
• Connect the IR receiver to the red break out socket on the repeater cable.
• Locate the IR sensor so it is in line of sight to the remote control to be used.
• Connect the main HDMI connection lead to the female socket on the repeater
cable.
SPECIFICATIONS
Frequency range 20-60kHz
IR Range 10 meters
Direction Bi directional - both repeater cables
are identical and can be used at
either end of the equipment link.
CPC Farnell declares that the radio equipment for wireless transmitter/receivers is in
compliance with Radio Equipment Directive 2014/53/EU
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it mu be treated as Wae Electrical & Electronic Equipment (WEEE).
Any WEEE marked products mu not be mixed with general household wae, but kept separate for the treatment,
recovery and recycling of the materials used. Contact your local authority for details of recycling schemes in your area.
Made in Taiwan
PR2 9PP
PO Box 13362 Dublin 2
Man Rev 1.1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

PRO SIGNAL PSG3401 Operating instructions

Brand
PRO SIGNAL
Model
PSG3401
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents