Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
When using electrical appliances basic safety precautions should always be followed.
• To prevent fire or shock hazard, do not expose this product to rain or moisture.
• Turn the power off all source and destination equipment before making the
connections.
OVERVIEW
• IRHDMIKIT is a simple and effective kit that allows you to send IR signals to remote
devices over existing HDMI cabling.
• Easily maintain control over source devices via the original IR remote control.
• Ideal for installations where devices are out of sight or IR range.
WHAT’S IN THE BOX
• 2 x HDMI repeater cables with IR break out.
• 1 x 3m twin IR emitter cable.
• 1 x 1.5m IR receiver cable.
• User Manual.
INSTALLATION
• Connect the male HDMI plug on the repeater cable to the HDMI output from the
source device.
• Connect the IR emitter to the red break out socket on the repeater cable.
• Locate the sensor close to the source equipment IR receiver.
• Connect the main HDMI connection lead to the female socket on the repeater cable.
• Connect the male HDMI plug on the repeater cable to the HDMI input on the
destination device.
• Connect the IR receiver to the red break out socket on the repeater cable.
• Locate the IR sensor so it is in line of sight to the remote control to be used.
• Connect the main HDMI connection lead to the female socket on the repeater cable.
