Zenoah ZENGR26099 Owner's manual

Category
Engine
Type
Owner's manual

This manual is also suitable for

1. How to use
A) Dismantling of Current Starter Assembly
1. Remove the sparkplug.
2. Remove the recoil from the engine mount.
3. Fit the piston stopper (4810-96220) into sparkplug
thread. (see Fig.1)
4. Set a plier etc to pulley (1160-75210) and turn the plier to
anticlockwise. (see Fig.1)
B) Assembling of Starter Kit
1. Screw the pulley (848-ESZ-7520) on the crankshaft by
hand.
2. Set a plier etc to pulley and turn the plier to clockwise.
(see Fig.2)
[Requested tightening torque: 100kg-cm]
3. Fit the recoil (848-ESZ-7510) inserting spacer (848-8Y4-
6100) 4pcs between engine mount and starter assembly.
(see Fig.3)
[Requested tightening torque: 18kg-cm]
4. Remove the piston stopper and fix the sparkplug.
2. Composition of the starter kit
Caution !
This kit is not covered by Komatsu Zenoah warranty
policy.
Piston Stopper
Plier
Fig.1
Plier
Pulley
Fig.2
Spacer
Fig.3
STARTER KIT (GR26099)
For
G260PUM/G260PUH
G231PUM/G231PUH
848-ESZ-93A0 (505)
Head Office : 1-9 Minamidai, Kawagoe-city, Saitama, 350-1192 Japan
Phone: (+81)49-243-1115 Fax: (+81)49-243-7197
No. Part Number Part Name External Appearance Q'ty
1 848-ESZ-7510 Recoil 1
2 848-ESZ-7520 Pulley 1
3 848-8Y4-6100 Spacer 4
4 0260-30420 Screw 4
5 4810-96220 Stopper 1
6 848-ESZ-93A0 Manual 1
  • Page 1 1

Zenoah ZENGR26099 Owner's manual

Category
Engine
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI