Fujitsu 102 User manual

Fujitsu
Brand
Fujitsu
Model
102
Category
Print & Scan
Type
User manual

This manual is also suitable for

Fujitsu 102 is a 24V battery drive, 2-color thermal printer with a 2” type mechanism. It is suitable for use in a variety of applications, including portable terminals, POS terminals, ticket machines, coupon machines, label printers, banking machines, measuring devices, and medical equipment.

The Fujitsu 102 can print at a high speed of 100 mm/s (800 dotlines/s) using Fujitsu Components' unique head drive control. It can print in two colors: blue/black or red/black. The printer is also equipped with an auto cutter (full cut/partial cut) and a paper auto loading function.

The Fujitsu 102 is easy to use and maintain. It has a user-friendly interface and is designed for easy head cleaning and replacement. The printer also has two paper paths, allowing for front and bottom paper insertion.

Fujitsu 102 is a 24V battery drive, 2-color thermal printer with a 2” type mechanism. It is suitable for use in a variety of applications, including portable terminals, POS terminals, ticket machines, coupon machines, label printers, banking machines, measuring devices, and medical equipment.

The Fujitsu 102 can print at a high speed of 100 mm/s (800 dotlines/s) using Fujitsu Components' unique head drive control. It can print in two colors: blue/black or red/black. The printer is also equipped with an auto cutter (full cut/partial cut) and a paper auto loading function.

The Fujitsu 102 is easy to use and maintain. It has a user-friendly interface and is designed for easy head cleaning and replacement. The printer also has two paper paths, allowing for front and bottom paper insertion.

FTP-622MCL101/102/353/354
■ OVERVIEW
New 2-color printer (blue/black or red/black) joins FTP-602
Series. The series consists of 24V battery drive compact thermal
printers which can print at high speed.
This series is suitable as built-in printer for a variety of
applications, such as portable terminals, POS terminals, ticket
machines, coupon machines, label printers, banking machines,
measuring devices, medical equipment, etc.
■ HIGHLIGHTS
• 2 Color printing
It can print 2 colors: blue/ black or red/black
• High speed printing
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control (at monochromatic
printing).
Speed of 2-color printing: - blue and red: 80 mm/s (460
dotlines/s) maximum
- monochromatic print: 40mm/s
maximum
• Auto Cutter
Printer with auto cutter (full cut/ partial cut) is available.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• Easy head access
It is designed for easy head cleaning and head replace-
ment.
• Two paper paths
Front and bottom paper insertion is available.
24V DRIVE, 2-COLOR THERMAL PRINTER
2” TYPE MECHANISM
FTP-622MCL101
1
2
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
■ PART NUMBERS
■ GENERAL SPECIFICATIONS
*1: FTP-622DCL411 is ANK supported only
*2: FTP-622DSL438 has FLASH memory and can print high speed images
*3: Supports Kanji and parallel and serial interfaces
emaNrebmuNtraP
msinahceMretnirP
)noitresnirepaptnorf(101LCM226-PTF
)noitresnirepapmottob(201LCM226-PTF
rettuChtiwmsinahceMretnirP
)noitresnirepaptnorf(353LCM226-PTF
)noitresnirepapmottob(453LCM226-PTF
draoBecafretnI
lellaraP*114LCD226-PTF
1
laireS*834LSD226-PTF
2
)ijnaK,cihtoG(
)UCM(ISL*102UC226-PTF
3
elbaCecafretnI
lellaraP
)scinortneC(
102Y144-PTF
)C232-SR(laireS103Y226-PTF
elbaC
rewoP104Y226-PTF
daeH)msinahcemotdelbmessaerpCFF(108Y226-PTF
(Continued)
Part number FTP-622MCL101/102/353/354
Printing method Thermal-sensitive line dot method
Dot structure 432 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 54 mm
Number of columns
ANK 36 columns (12X24 dot font max.)
Paper width 58mm± 60mm±
Paper thickness 60 to 100 µ m (there may be exceptions)
Printing speed 100mm/s (800 dotlines/s maximum at black-white image batch printing
Character types Alphanumeric KANA :159
International :195
JIS Kanji (Kanji CG loaded board) :approx. 6800
36 columns
18 columns
54 columns
27 columns
Interface Centronics / RS-232C standard
SpecificationsItem
Character,
dimensions(H×W),
number of
characters
0
1
0
1
12×24 dots,(1.5×3.0mm)
24×24 dots,(3.0×3.0mm)
8×16 dots,(1.0×2.0mm)
16×16 dots,(2.0×2.0mm)
3
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
For head
24 VDC ±5% 1.1 (1.7A)
(24V Rav1500Ω, 25% printing ratio)
For printer motor 24VDC±5% 1A maximum
For cutter motor 24VDC±5% 1A maximum
For logic 5VDC±5% 0.5 A maximum
Printer Mechanism 82 (W) × 48 (D) × 20 (H) mm
Dimensions
Mechanism with cutter 97 (W) × 57 (D) × 38(H) mm
Interface board 131 (W) × 89 (D) × 24 (H) mm
Weight Printer Mechanism Approximately 81g
Mechanism with cutter Approximately 280g
Life Head Pulse durability: 1 × 10
8
pulse/dot (using Fujitsu Components' standard
driving method)
Wear resistance: 50 km (at 25% print ratio)
Cutter 3x10
3
times minimum 5x10
5
times minimum
Operating temperature +5 to +40°C (Guarantee, but can operate between 0°C to +50°C)
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor
Detection Paper out/Mark detect By photointerrupter
Head release By slide switch
2 color paper (blue/black) PB770 (Mitsubishi paper)
(red/black) PB670 (Mitsubishi paper)
High sensitivity paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E (Nippon paper), FTP-020P0104 (58mm)
PD150R (Oji paper), FTP-020P020P0701 (58mm)
Medium term paper TP60KS-F1 (Nippon paper),FTP-020P0102(58mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
PD160R-N (Oji paper)
Long term paper AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
SpecificationsItem
(Continued)
Power
supply
Environmental
conditions
Part number FTP-622MCL101/102/353/354
Recommended
thermal sensitive
paper
4
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
■ DIMENSIONS
1. Printer mechanism
Unit: mm
FTP-622MCL101/102
2. Printer mechanism with cutter
Unit: mm
FTP-622MCL353/354
*2)
310
à”íç
ênÇ…êGÇÁǻǢÇ≈â∫Ç≥Ç¢ÅB
CAUTION
3-2orless
(96.7)
47.8
Å} 1
48.9
J
APAN
F
F
F
T
J
F
T
F
F
T
.
T
F
.
F
T
T
.
F
F
T
F
T
T
F
T
.
JAPAN
241
(MOTOR CABLE)
13.3
37.20.5
14.2 41.9
316
2.5MAX
(OUTER LENGTH
FO MOVABLE CUTTER)
12.1
(FFC)
(SENSOR CABLE)
226
MCL354
MCL303
M
(73.1)
S
S
5
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
Interface board
Unit: mm
15.0max
5.0max
1.6
4-Ø3.6 ±0.1
(39.4) (39.4)
5.1 5.178.7
5.1120.75.1
105.4
86.4
33.2
105.4
87.6
41.8
21.8
CN8
4
1
1
4
CN7
1
1
CN5
1
1
CN3
9
9
2930
2
1
CN1
CN2
1
1
1
2
2
CN9
Height of devices side
Height of solder side
6
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
7
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
■ CONNECTOR FOR THERMAL HEAD
1.
Head side : IL-FPC-28CLIP (JAE)
Board side : 52045 (Molex) or equivalent
2. Motor connectors
Motor side : PHR-4 (J.S.T.) or equivalent
Board side : B4B-PH-K-S (J.S.T.) or equivalent
*1: Symbol: " " means a negative logic signal
1, 2, 3, ......................................15, 16
Motor
Thermal head heat sink
Head up level
Connector Pin No.
3. Sensor connectors
Sensor : PHR-5 (J.S.T.) or equivalent
Board side : B5B-PH-K-S (J.S.T.) or equivalent
.oNlangiStnemmoC
1B BgnivirdrotomesluP
2B BgnivirdrotomesluP
3A AgnivirdrotomesluP
4A AgnivirdrotomesluP
.oNlangiStnemmoC
1NESVrosnesrepaprofrewoP
2EHProttimeretpurretniotohP
3KHPedohtacretpurretniotohP
41WS1hctiwstcetedpudaeH
52WS2hctiwstcetedpudaeH
8
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
■ FUNCTION
ITEM ITEM
1. Test printing 8. Motor power save
2. Paper-out detection 9. Mark detection
3. Paper near end detection 10. MCU trouble detection
4. Head-up detection 11. Power on/off sequence protection
5. Abnormal temp. of thermal head detection 12. Motor protection
6. Blown fuse detection 13. Hardware timer
7. Abnormal voltage detection of head
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Fujitsu 102 User manual

Fujitsu
Brand
Fujitsu
Model
102
Category
Print & Scan
Type
User manual
This manual is also suitable for

Fujitsu 102 is a 24V battery drive, 2-color thermal printer with a 2” type mechanism. It is suitable for use in a variety of applications, including portable terminals, POS terminals, ticket machines, coupon machines, label printers, banking machines, measuring devices, and medical equipment.

The Fujitsu 102 can print at a high speed of 100 mm/s (800 dotlines/s) using Fujitsu Components' unique head drive control. It can print in two colors: blue/black or red/black. The printer is also equipped with an auto cutter (full cut/partial cut) and a paper auto loading function.

The Fujitsu 102 is easy to use and maintain. It has a user-friendly interface and is designed for easy head cleaning and replacement. The printer also has two paper paths, allowing for front and bottom paper insertion.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents