INSTALLATION MANUAL
10107DL
Requires 700mA driver.
AB
C D
Warnings:
1. Make sure that the product is installed properly before connecting to electricity.
2. Do not cover the fitting.
3. Maintenance and installation should only be carried out by a professional electrician.
42mm
100mm
40cm
42mm
Connect the fitting to the driver.
700mA | COB LED | 7W | IP65 | Aluminium 90mm
53mm
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
luminii Domino 2 Recessed Trimless Installation guide
-
Altronix EBRIDGE16CR Installation guide
-
TRINAMIC / ANALOG DEVICES TMCM-1070-CABLE Operating instructions
-
Trinamic TMCM-1070 Owner's manual
-
-
-
Lantronix Open-Q™ 820 Development Kit User guide
-
Electrolux EQBH100AS User manual
-
WIA W19 2rd Wirefeeder Owner's manual
-
Horizon Hobby Hangar 9 Ki-43 Oscar 60cc Owner's manual