2. Saxby Lighting
  3. 74707
74707

Saxby Lighting 74707 User manual

  • Hello! I've reviewed the user manual for the ShieldECO 800 light. This manual provides instructions on the installation and commissioning including how to ensure proper wiring, how to fit the device correctly and safety information. I'm here to answer any questions you have about this product.
  • What should I do before changing lightbulbs or cleaning?
    Are the LEDs in this product replaceable?
    What should I do with old electrical products?
ShieldECO 800
Recycling advice
Safety information
Fitting/replacing bulbs
Check that...
Commissioning
V7 27/11/2019
For your safety, always switch off the power supply before changing lightbulbs, or cleaning.
Warning
Specification
Layout
Ceiling Preparation
carefully note the position of each set
of wires
This product is Double Insulated and does
not require connection to an Earth circuit.
Wiring
Zone 1 Outside zones0.6m
0.6m
2.25m
Zone 2Zone 2
LOOP
EARTH (GREEN/YELLOW) FOR TERMINATION
INSERT CABLE
PUSH DOWN
This product is suitable for covering with insulation
270mm.
/