LINOVISION 4GPTZ is a portable emergency command device featuring smooth and stable video with high-definition quality. It offers real-time location tracking, an emergency alarm system, PTZ operation, and two-way talkback capabilities. This device is designed for various applications including emergency command, public security, criminal investigation, traffic control, fire fighting, and urban management.
LINOVISION 4GPTZ is a portable emergency command device featuring smooth and stable video with high-definition quality. It offers real-time location tracking, an emergency alarm system, PTZ operation, and two-way talkback capabilities. This device is designed for various applications including emergency command, public security, criminal investigation, traffic control, fire fighting, and urban management.
PORTABLE MOBILE EMERGENCY SUITCASE
User Manual
1
Thanks to purchase the products, if you have any question or requirement, please feel free to contact
us.
As the reference of usageinstruction, the description of some details may be not so accurate in this
manual.The contents of this document will be updated irregularly for product version upgrading or
other reasons, and the update will be added in the new version of the manual, we will not notify
separately.
Please read the manual carefully before installation and use.
Precautions
Please be sure to obey the follows when using this product:
Please read the manual carefully before using the device, and obey the instructions strictly when
operating.
Be sure to turn off all the related power when installing the device accessories.
Don’t use the device in excessive humidity or high temperature environment, avoid using the
device near the strong interference source and the shielding.
Avoid dropping the device on the ground or being attacked seriously by other object.
The product is a precision electronic device, please do not privately disassemble or install without
permission.
Suggest to protect with factory packaging when shipping products.
The device batteries, power adapter and accessories are specific models, be sure to contact the
manufacturer or local dealersif the batteries need to be changed, in case of the danger caused by
improper change or removal.
Please contact our technical personnel if you have any question or requirement during the using
process.
2
Contents
1. Product introduction.......................................................................................................................... 3
2. Appearance and interface description............................................................................................... 3
3. Parameter specification..................................................................................................................... 6
4. Configuration and usage....................................................................................................................7
4.1 login built-in webpage.................................................................................................................7
4.2 Platform address setting.............................................................................................................. 7
4.3 Access ways.................................................................................................................................8
4.3.1 Cable access..................................................................................................................... 8
4.3.2 WiFi access...................................................................................................................... 8
4.3.3 4G/3G access....................................................................................................................9
5. Scheduling screen operation instructions........................................................................................ 10
5.1 Login status............................................................................................................................... 10
5.2 Application settings................................................................................................................... 11
5.3 Video command......................................................................................................................... 11
5.4 Map command...........................................................................................................................12
5.5 Query playback..........................................................................................................................12
5.6 System settings.......................................................................................................................... 13
6. Command and schedule platform....................................................................................................13
7. Real-time preview........................................................................................................................... 13
8. Query playback................................................................................................................................14
9. Restore factory settings................................................................................................................... 14
9.1 Use “Device configuration assistant”........................................................................................14
9.2 Use “Network video surveillance system/built-in webpage”....................................................15
3
1. Product introduction
4G HD portable emergency command device is a full-featured integrative product with functions of high-definition,
smooth, and stable video effect, real-time location, emergency, PTZ operation, two-waytalkback, etc. It is a
complete set of emergency command devices that specially designed for unexpected emergencies, and provides
technical support for realizing “smooth communication, real-time scene, complete data, and command in place”.
The product is widely applied in the occasions of emergency command, public security, criminal investigation,
traffic police / patrolman, fire fighting, civil air defense, border defense, urban management, electric power, road
administration, etc.
2. Appearance and interface description
The product is a 4G multi-functional portable suitcase terminal, the device appearance and corresponding
interfaces are as shown below:
Appearance
4
Upper panel
Lower panel
The functions of the relevant interfaces on the device are shown in the table below：
5
No.
Interfaces
Functions
Upper
panel
HDMI
Synchronously output the screen image
Standard USB
Connect with USB, keyboard, mouse and otherperipherals
Square USB
Develop and debug the installation system, also can be connect with
peripherals
3.5mm headphone
jack
Android system sound output
Lower
panel
YC9 aviation plug
Connect with talkback handheld microphone
HDMI
HDMI video input port
Standard USB
Extended LinuxUSB peripherals（power supply is available）
RJ45 network port
System debugging or cable video transmission
Power
Press and hold for 3s to boot, the light is bright; Press and hold for 3s
to shut, the light is twinkling.
Network
Short press to switch network connection methods(using cable
method when light is bright while using 4/3G method when light is
off)
Video recording
Short press to start/stop video recording (recording when light is
bright while stopping recording when light is off)
Alarm
Press and hold for 3s, the light is bright, device issued a warning to
the platform
PTZ
Four-dimensional rocker, control the camera to turn to the up, down,
left and right. Rotation, control the camera to zoom out or zoom in.
short press the middle button to capture the image.
TF card slot
Clamshell card slot, push to the left to open the cover, dual cards up
to 128G
SIM card slot
Clamshell card slot, push to the left to open the cover, 4 cards can be
extended
Electronic disk
mSATA electronic disk installation position
Indicator
panel
4/3G dial-up status indication, “1” indicates module number
Figure 1: dial-up success
Figure 2: idle status
Figure 3: card is not detected
Using the cable connection way, can use the cable to connect the
BGAN router to access the command center
WiFi status indiction (figure 1: not enabled. Figure 2: connection
success)
TF card status indication
Location indication (bright: locating success. Twinkling: searching
location…)
Battery indication
6
Storage status indication
Side
interfaces
Indicators on the right side
Green twinkling: recording
Red bright: stop recording
Red twinkling: low battery warning
Charging interface on the right side
HD PTZ camera video input interface on the right side
GPS antenna interface on the right side
3. Parameter specification
Items
Details
Specifications
Video
Input
1-channel analog high definition, compatible with CVBS,
AHD1.0,AHD2.0, automatic recognition
1-channel HDMI, up to 1080P@30fps
Interface
Aviation interface on the right side
Compression
standard
H.265 和H.264。
Resolution
CVBS：960H、D1、4CIF、CIF。
AHD1.0：720P、VGA。
AHD2.0：1080P，720P，VGA。
HDMI：1080P，720P，VGA。
Frame rate
1~25f adjustable
Bit stream
Support dual-stream, 64kbps~6Mbps can be set
Video adjustment
Brightness, contrast, saturation, adjustable
Snapshot
Support the snapshot of different input source and resolution, format
Audio
Compression
standard
G711A,G711U, ADPCM
Input
1-channel, built-in microphone or handheld microphone input
Output
1-channel, built-in loudspeaker or handheld microphone output
Display
Screen size
13.3 inch
Resolution
1920*1080。
Visual angle
88/88/88/88。
Network
3G/4G
WCDMA,EVDO,TD-SCDMA,TDD-LTE,FDD-LTE。
WiFi
802.11b/g/n，2.4G。
Wired
RJ45,10/100M self-adaption Ethernet port
Storage
Medium
TF, up to 128G, dual cards
mSATA
Built-in a mSATA installation position
Format
AVI, 15~60 minutes can be set, start or stopcontrolled by a button
Location
System
Support GPS and Beidou dual-module locating
Antenna
SMA interface, external
Power
Input
12.6V@4A DC constant voltage input
Interface
DC5.5*2.1interface on the right side
Battery
Built-in 3 lithium batteries, 30Ah
7
Others
Protection
IP67
Dimension
410*340*205mm
Weight
9.2KG
Working humidity
Temperature -20℃~60℃, humidity 5%~95%
4. Configuration and usage
It is necessary to set up some parameters before install the device, such as the access platform address, etc.
The specific configuration process is as shown below, please contact the customer service personnel if you
have any question.
4.1 login built-in webpage
Please login the built-in webpage according to the following operations, please contact the customer service
personnel if you have any question.
4.2 Platform address setting
After login the built-in webpage, enter the “device configuration” page. Click “system/platform access”, and
select “enable platform access”, input the platform address in the pop-up window, such as
60.173.195.210:9988, click submit and refresh. When the access status shows “access success”, the video can
be previewed after logged in the platform via the network video surveillance system.
8
4.3 Access ways
Different network connection way can be selected to make the device access the platform according to the
requirements. Three ways are supported by the device to connect the network: cable/ WiFi /4G. Fast
switching can be realized via the ‘network” button on the lower panel, and according to the display status on
the indicator panel to judge the connection way and connection status. The configuration modification also
can be realized via client/built-in webpage, the details are as below:
4.3.1 Cable access
Click after login the built-in webpage, find the “network configuration” in the system, input the IP
address, subnet mask and gateway in the IP settings. Select “enable DHCP” if use the auto access way,
submit.
Select “use the cable” in the “preferred network”, submit.
4.3.2 WiFi access
Click after login the built-in webpage, find the “network configuration” in the system, and select “use
WiFi” in the “preferred network”, submit.
Click WiFi option and select “enable WiFi’, input the wireless network account and password, submit and
refresh. Observe the module status until the connection is successful. (Note: the hotspot function needs to be
shut firstly)
9
4.3.3 4G/3G access
Click after login the built-in webpage, find the “network configuration” in the system, and select “use
4G/3G” in the “preferred network”, submit.
Click 4G/3G option, check the dial-up status in the status parameters, the device has access to the network
when it shows “dial-up success”.
It needs to add APN, access number, and password in the configuration parameters if the used SIM card is the
private network card.
10
5. Scheduling screen operation instructions
As shown in the figure below, the LCD of the upper panel is the android system touch screen. Main function
modules: login status, video command, map command, query playback, application settings, system settings.
The follows will introduce the function of each module.
Screen function sketch
5.1 Login status
Device connection / login server status are shown on the left upper corn of the screen.If it displays “Device
connection is successful”, it indicates that the connection between the upper panel and the lower panel is
smooth. When it shows “login server is successful”, it means the device has successfully logged onto the
emergency command system.
As shown in the figure below, if login server is not successful, please check the network connection, and
configure the platform address and user name of the emergency command system in the “application
settings”.
11
Login process sketch
5.2 Application settings
It needs to input the platform address, user name and password in the “application settings” before login the
server. Please login again after save. The network port IP of the device can be set in the network settings, as
shown in the figure below:
5.3 Video command
Enter the page “video command”, real-time scene image can be seen. 2-channel HD videos are displayed, one
main channel video input source is HDMI, and the other channel video input source comes from the camera
in the right side of the suitcase. Full-screen display and snapshot are supported.
The online group members are displayed on the right side, click the microphone icon to shout to the group, or
talk to any member in the groupand watch his real-time video.
12
5.4 Map command
People can master the location information of their own and other portable terminals in the “map command”
page and view the video of other terminals, as shown in the figure below:
5.5 Query playback
The video files and images saved in the built-in memory card can be queried and processed playback in the
“query playback” page, as shown in the figure below:
13
5.6 System settings
Each functional parameter can be changed in the Android system after enter the page, the same with other
Android system settings, no longer describe details here.
6. Command and schedule platform
Login the emergency command and schedule platform after logged into the server tocreate cluster
group.Group communication, retrieval image, video conference and other functions can be realized. Please
refer to the User Manual of emergency command and schedule client for the details.
7. Real-time preview
“network video surveillance system” can be used after device successfully accessed platform. After login, the
real-time image of the online devices can be viewed. Select an online device, double click to unfold the
camera resource, double click the camera, video will be displayed on the window. Right click the image to
pop up the shortcut bar, snapshot, video recording, talkback and other functions can be realized, as shown in
the figure below:
14
8. Query playback
Login “network video surveillance system”, click query playback. : query the videos saved in the
platform, : query the videos saved in the device storage medium. Select device and date, click to query,
double click the video file in the query results to playback, or right click to download the video, as shown in
the figure below:
9. Restore factory settings
9.1 Use “Device configuration assistant”
Make sure PC and device in the same LAN, open the tool “Device configuration assistant” to search the
device and select it, click icon, find “device maintenance” in the pop-up window, click “restore factory
settings” to confirm, as shown in the figure below:
15
9.2 Use “Network video surveillance system/built-in webpage”
Login the network video surveillance system, click “device management”, double click the device in the
device list, select system/device information/restore factory settings. Operations of the built-in webpage are
the same, as shown in the figure below:
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
LINOVISION 4GPTZ is a portable emergency command device featuring smooth and stable video with high-definition quality. It offers real-time location tracking, an emergency alarm system, PTZ operation, and two-way talkback capabilities. This device is designed for various applications including emergency command, public security, criminal investigation, traffic control, fire fighting, and urban management.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Dahua SDT5X425-4Z4-FAJG-PV-0832 User manual
-
-
Optimus GX-HD3320 User manual
-
-
Dahua ITC215-PW6M-IRLZF-B User manual
-
Intellisystem IT-FHDCC15 Owner's manual
-
-
-
-