P50

Atoll P50 Operating instructions

  • I've reviewed the user manual for the P50 and P100 phono stages. This document explains how to connect your phono input using the Auxiliary input and provides important instructions for reducing noise and avoiding damage. I'm ready to answer your questions about this device.
  • Where should I plug in my phono input?
    How do I avoid parasite noise when connecting a phono input?
    Can I plug a CD player into the AUX Input?
PHONO INPUT P50
Warning : Never plug in the AUX. Input any other kind of sources : CD player,
Tuner, Tapeā€¦
Your Intergrated / preamp. is equipped with a phono stage MM (P50) or MM/
MC (P100). To use it, you have to plug it on the Auxiliary Input.
The signal connection is made on the AUXILIARY input.
To avoid any parasite noise, you must link the ground of your Phono to the
screw which is placed under the Auxiliary input (rear of appliance).
Rear view of appliance:
SIGNAL
GROUND
The selection of the Phono has to be maid by the selector keys on the AUX.
position.
HOW TO CONNECT YOUR PHONO INPUT
/