SVS 856677007886 Owner's manual

Brand: SVS

Model: 856677007886

Type: Owner's manual

The SVS 856677007886 Tri-Band Wireless Audio Adapter lets you wirelessly connect up to six receivers to a single transmitter, transmitting audio signals without compromising quality. Its simple setup process, with clear LED indicators, ensures easy pairing and connection. The adapter's robust wireless performance guarantees a stable and reliable connection, making it ideal for home theater systems, multi-room audio setups, and more.

The SVS 856677007886 Tri-Band Wireless Audio Adapter lets you wirelessly connect up to six receivers to a single transmitter, transmitting audio signals without compromising quality. Its simple setup process, with clear LED indicators, ensures easy pairing and connection. The adapter's robust wireless performance guarantees a stable and reliable connection, making it ideal for home theater systems, multi-room audio setups, and more.

TRI-BAND WIRELESS AUDIO

ADAPTER

Owner’s Manual

(Additional Tri-Band Wireless Receiver)

(Transmitter) (Receivers)

Thank you for choosing SVS!

The following instructions will help you setup additional Tri-Band wireless Receivers with your

SVS SoundPath Tri-Band Wireless Audio Adapter. Before proceeding, please complete the

setup and pairing instructions for the primary Transmitter/Receiver kit.

Installation requires only a few simple steps. If you have questions about subwoofer or speaker

placement, system optimization or installing the SVS SoundPath Tri-Band Wireless Audio Adapter,

please contact the SVS Sound Experts tech support 7-days-a-week.

[email protected] | 877.626.5623 | www.svsound.com

Adding Additional Wireless Receivers

A single SVS SoundPath Tri-Band Wireless Audio Adapter Transmitter can wirelessly connect and

transmit a signal to up to six (6) Receivers.

Before Pairing

Conﬁrm the primary SoundPath Tri-Band Wireless Audio Transmitter and Receiver are paired.

Successful pairing will be indicated by a steady blue light on both the transmitter and receiver.

It is important to put the Receiver in pairing mode ﬁrst, before the Transmitter.

If done in reverse, they will appear to pair but lose connection after 60 seconds.

Steps for Pairing Additional Receivers with Transmitter

1. Power down any Receivers currently paired with the Transmitter. This can be done by

disconnecting the power supply cable.

2. Connect additional Receiver to subwoofer or

speakers via RCA cable and connect power cord via

USB or AC power outlet. A slow ﬂashing light indicates

the unit is not paired.

3. Press and hold the PAIR button located on the back of

the Receiver until the blue LED light located on the

top of the unit ﬂashes quickly.

4. Within 30 seconds, press and hold the PAIR button

located on the back of the Transmitter.

5. When your Transmitter and additional Receiver are

paired, the wireless status lights on the top of both units will turn solid blue.

6. Power up any Receivers that were powered down in step #1.

7. Repeat steps for any additional Receivers.

INPUT OUTPUT

Audio In

L

Power Pair

R



1
2

SVS 856677007886 Owner's manual

Brand: SVS

Model: 856677007886

Type: Owner's manual

The SVS 856677007886 Tri-Band Wireless Audio Adapter lets you wirelessly connect up to six receivers to a single transmitter, transmitting audio signals without compromising quality. Its simple setup process, with clear LED indicators, ensures easy pairing and connection. The adapter's robust wireless performance guarantees a stable and reliable connection, making it ideal for home theater systems, multi-room audio setups, and more.

Related papers

Other documents