2. FS COM
  3. AC-7072
AC-7072

FS COM AC-7072 User guide

  • Hello! I am an AI chatbot trained to assist you with the FS COM AC-7072 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ENTERPRISE WIRELESS LAN CONTROLLER
V1.0
Quick Start Guide
Quick-Start Anleitung
Guide de Démarrage Rapide
AC-7072
Reset
Console USB
1/MGMT 24683 57
1F 3F 5F 7F2F 4F 6F 8F
1F 3F
2F
SFP+
4F
AC-7072
CONTRÔLEUR LAN SANS FIL POUR ENTREPRISE
ENTERPRISE WIRELESS LAN CONTROLLER
1
Introduction
EN
Thank you for choosing the enterprise wireless LAN controller. This guide is designed to familiarize you
with the layout of the wireless LAN controller and describes how to deploy the wireless LAN controller
in your network.
AC-1004
AC-7072
Console WAN DC1 2 3 4
AC-1004
RST
PWR
SYS
WAN
1 2 3 4
LAN
PoE
53.5V
1/MGMT 2 4 6 83 5 7 1F 3F 5F 7F2F 4F
1F 3F
2F
SFP+
4F
6F 8F
Reset
Console
AC-7072
USB
2
M4 Screw x4 Mounting Bracket x2
Accessories
EN
AC-7072
AC-1004
Rubber Pad x4
Console Cable x1 Grounding Cable x1Power Cord x1
Power Adapter x1 Power Adapter x1 Screw Anchor x2
3
Front Panel Port
Front Panel Button
Ports Description
POWER
WAN
LAN1-4
53.5V DC power port
Wide Area Network interface
First Local Area Network interface
CONSOLE
USB
A RJ45 console port for serial management
A USB management port for software and conguration backup
and oine software upgrade
Buttons Description
RESET Press it for more than 3s: Restore to Factory Default Settings.
Press it for less than 3s: Restart the controller.
EN
Hardware Overview
AC-1004
Console WAN DC1 2 3 4
AC-1004
RST
PWR
SYS
WAN
1 2 3 4
LAN
PoE
53.5V
RST SYS PoE USB
PWR WAN LAN1-4
LAN1-4
Console WAN POWER
4
Front Panel LED
Back Panel
WAN
Port 100/10M Link UpSolid Orange
Blinking Orange Port 100/10M Data Transceiver
LAN
SYS
PWR
POE
O
Blinking Green
Solid Orange
Solid Green
Blinking Green
Solid Green
O
Solid Green
O
O
The system is abnormal.
The system is initializing.
The initialization process is complete.
The controller is powered o.
The controller is powered on.
POE is powered o.
POE is powered on.
No Port Llink
Port 1000M Link Up
Port 1000M Data Transceiver
Port 100/10M Link UpSolid Orange
Blinking Orange Port 100/10M Data Transceiver
Blinking Green
Solid Green
O No Port Link
Port 1000M Link Up
Port 1000M Data Transceiver
LEDs State Description
EN
Grounding Point
5
Front Panel Port
Ports Description
CONSOLE
USB
RJ45
A RJ45 console port for serial management
A USB management port for software and conguration backup
and oine software upgrade
10/100/1000Base-T ports for Ethernet connection
SFP
SFP+
Optical&Electrical Multiplexing 1000Base-X SFP port for 1G
connection
10GBASE-SR/LR SFP+ port for 10G connection
Front Panel Button
Buttons Description
RESET Restore to Factory Default Settings.
EN
AC-7072
Console
USB RJ45
SFP
SFP+SFP
1/MGMT 2 4 6 83 5 7 1F 3F 5F 7F2F 4F 6F 8F
1F 3F
2F
SFP+
4F
Reset
Console
AC-7072
USB
6
Front Panel LED
Back Panel
EN
SYSTEM
1-8F
Electrical
Indicator
1F-8F 1G
Optical
Indicator
1F-4F 10G
Optical
Indicator
The system is initializing.Blinking Green
1G LINKSolid Green
LinkBlinking Green
LinkBlinking Green
Data TransceiverSolid Green
Power Grounding Point
Data TransceiverSolid Green
100/10M LINKSolid Yellow
Data TransceiverBlinking
The initialization process is complete.Solid Green
The system sends out an alarm.Solid Red
LEDs State Description
7
Mounting the Wireless LAN Controller
Desk Mounting
Installation Requirements
Before you begin the installation, make sure that you have the followings:
EN
Phillips screwdriver.
Standard-sized, 19" wide rack with a minimum of 1U height available.
Category 5e or higher RJ-45 Ethernet cables and ber optical cables for connecting network
devices.
Site Environment
Make sure the installation site is dry and at.
Keep the controller far away from the heat source.
Ensure that the controller is properly grounded.
Wear an anti-static wrist strap during installation and maintenance.
Keep the controller and installation tools away from walkways.
Use UPS (Uninterruptible Power Supply) to prevent power failure and other interference.
1. Attach four rubber pads to the bottom.
2. Place the controller on a desk.
AC-1004
RST
PWR
SYS
WAN
1 2 3 4
LAN
PoE
Console WAN DC1 2 3 4 53.5V
8
EN
Rack Mounting
1. Secure the mounting brackets on the two sides of the controller with six M4 screws.
2. Attach the contro ller to the rack using four M6 screws and cage nuts.
AC-7072
1F 3F
2F
SFP+
4F
1F 3F
2F
SFP+
4F
AC-7072
9
Connecting the Power
EN
Grounding the Controller
1. Connect one end of the grounding cable to a proper earth ground, such as the rack in which the
controller is mounted.
2. Secure the grounding lug to the grounding point on the controller back panel with the washers and
screws.
AC-7072
10
Connecting the Console Ports
Connecting the RJ45 Ports
EN
1. Plug the AC power cord into the power port on the back panel.
2. Connect the other end of the power cord to an AC power source.
1. Insert the RJ45 connector into the RJ45 console port on the front panel.
2. Connect the DB9 female connector of the console cable to RS-232 serial port on the computer.
Console
Reset
USB
1/MGMT 24683 57
1F 3F 5F 7F2F 4F 6F 8F
Console
Reset
USB
1/MGMT 24683 57
1F 3F 5F 7F2F 4F 6F 8F
11
NOTE: The AC-1004 can’t be mounted in the rack. Other detailed steps of its installation are
the same as the AC-7072.
EN
1. Connect an Ethernet cable to the RJ45 port of a computer or other network devices.
2. Connect the other end of the Ethernet cable to the RJ45 port of the controller.
1. Plug the compatible SFP transceiver into the SFP port.
2. Connect a ber optic cable to the ber transceiver. Then connect the other end of the cable to
another ber device.
Connecting the SFP Ports
AC-7072
AC-7072
AC-7072
Console
Reset
USB
1/MGMT 24683 57
1F 3F 5F 7F2F 4F 6F 8F
12
Step 1: Connect a computer to the controller's console port using the supplied console cable.
Step 2: Start the terminal simulation software such as HyperTerminal on the computer.
Step 3: Set the parameters of the HyperTerminal: 9600 bits per second, 8 data bits, no parity, 1 stop bit
and no ow control.
Step 4: After setting the parameters, click Connect to enter.
x
Quick Connect
Protocol: Serial
Flow Control
DTR/DSR
RTS/CTS
XON/XOFF
Save sessionShow quick connect on startup
The port may be manually entered or selected from the list.
Open in a tab
Connect Cancel
COM3
9600
8
None
1
Port:
Baud rate:
Data bits:
Parity:
Stop bits:
Name of pipe:
Conguring the Wireless LAN Controller
Conguring the Controller Using the Console Port
EN
1. Check if the network cable is intact.
2. Check if the hardware connection is correct.
3. The system status indicator on the device panel and the NIC indicator on the computer must be lit.
4. The computer's IP address setting is correct.
Troubleshooting
The Screen Displays Request Timed Out
Online Resources
Download
Help Center
Contact Us
https://www.fs.com/products_support.html
https://www.fs.com/service/fs_support.html
https://www.fs.com/contact_us.html
Product Warranty
FS ensures our customers that if there are any damage or faulty items due to our workmanship, we
will oer a free return within 30 Days from the day you receive your goods. We will also oer free
software update service. This excludes any custom made items or tailored solutions.
Return: If you want to return item(s), information on how to return can be found at
https://www.fs.com/policies/day_return_policy.html
Warranty: This product enjoys 3 years limited warranty against defect in materials or
workmanship. For more details about warranty, please check at
https://www.fs.com/policies/warranty.html
3
EN
13
14
Einführung
DE
Vielen Dank, dass Sie sich für den Enterprise Wireless LAN Controller entschieden haben. Diese
Anleitung soll Sie mit dem Aufbau des Wireless LAN Controllers vertraut machen und erklärt, wie Sie
den Wireless LAN Controller in Ihrem Netzwerk einsetzen.
AC-1004
AC-7072
Console WAN DC1 2 3 4
AC-1004
RST
PWR
SYS
WAN
1 2 3 4
LAN
PoE
53.5V
1/MGMT 2 4 6 83 5 7 1F 3F 5F 7F2F 4F
1F 3F
2F
SFP+
4F
6F 8F
Reset
Console
AC-7072
USB
15
M4-Schraube x4 Montagehalterung x2
Zubehör
DE
AC-7072
AC-1004
Gummipad x4
Konsolenkabel x1 Erdungskabel x1
Netzkabel x1
Netzadapter x1 Netzadapter x1 Schraubanker x2
Console WAN DC1 2 3 4
AC-1004
RST
PWR
SYS
WAN
1 2 3 4
LAN
PoE
53.5V
RST SYS PoE USB
PWR WAN LAN1-4
LAN1-4
Console WAN STROM
16
Ports an der Vorderseite
Tasten an der Vorderseite
Port Beschreibung
STROM
WAN
LAN1-4
53,5V DC-Stromanschluss
Wide Area Network-Interface
Erste Local Area Network-Interface
CONSOLE
USB
Ein RJ45-Console-Port für die serielle Verwaltung
Ein USB-Management-Port für Software- und Kongurationsbackup
und Oine-Software-Upgrade
Taste Beschreibung
RESET Länger als 3 Sekunden drücken: Auf Werkseinstellungen zurücksetzen.
Kürzer als 3 Sekunden drücken: Neustart des Controllers.
DE
Hardware-Übersicht
AC-1004
17
LEDs an der Vorderseite
Rückseite
WAN
100/10M Link Up PortDurchgehend Orange
Blinkt Orange 100/10M Daten-Transceiver-Port
LAN
SYS
PWR
POE
Aus
Blinkt Grün
Durchgehend Orange
Durchgehend Grün
Blinkt Grün
Durchgehend Grün
Aus
Durchgehend Grün
Aus
Aus
Das System ist fehlerhaft.
Das System wird initialisiert.
Der Initialisierungsprozess ist abgeschlossen.
Der Controller ist ausgeschaltet.
Der Controller ist eingeschaltet.
PoE ist ausgeschaltet.
PoE ist eingeschaltet.
Keine Port-Verbindung
1000M Link Up Port
1000M Daten-Transceiver-Port
100/10M Link Up PortDurchgehend Orange
Blinkt Orange 100/10M Daten-Transceiver-Port
Blinkt Grün
Durchgehend Grün
Aus Keine Port-Verbindung
1000M Link Up Port
1000M Daten-Transceiver-Port
LED Status Beschreibung
DE
Erdungspunkt
Console
USB RJ45
SFP
SFP+SFP
1/MGMT 2 4 6 83 5 7 1F 3F 5F 7F2F 4F 6F 8F
1F 3F
2F
SFP+
4F
Reset
Console
AC-7072
USB
18
Ports an der Vorderseite
Port Beschreibung
CONSOLE
USB
RJ45
Ein RJ45-Console-Port für die serielle Verwaltung
Ein USB-Verwaltungsport für Software- und Kongurationssicherung
und Oine-Software-Upgrade
110/100/1000Base-T-Ports für Ethernet-Anschluss
SFP
SFP+
Optisches und elektrisches Multiplexing 1000Base-X SFP-Port für
1G-Verbindung
10GBASE-SR/LR SFP+-Port für 10G-Verbindung
Tasten an der Vorderseite
Taste Beschreibung
RESET Auf Werkseinstellungen zurücksetzen.
DE
AC-7072
LEDs an der Vorderseite
Rückseite
19
DE
SYSTEM
1-8G
Elektrisches
Anzeige
1F-8F 1G
Optischer
Indikator
1F-4F 10G
Optischer
Indikator
Das System wird initialisiert.Blinkt Grün
1G VerbindungDurchgehend Grün
VerbindungBlinkt Grün
VerbindungBlinkt Grün
Daten-TransceiverDurchgehend Grün
Strom Erdungspunkt
Daten-TransceiverDurchgehend Grün
100/10M-VerbindungDurchgehend Gelb
Daten-TransceiverBlinkt
Der Initialisierungsprozess ist abgeschlossen.Durchgehend Grün
Das System meldet einen Alarm.Durchgehend Rot
LED Status Beschreibung
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/