BAS-IP SH-31TM Temperature Module User manual

SH-31TM Temperature Module
Brand
BAS-IP
Model
SH-31TM Temperature Module
Type
User manual

This manual is also suitable for

BAS-IP bas-IP SH-31TM Temperature Module is designed to measure human body temperature in real time with high precision (±0.3°C or better) from a distance of 10 to 40 mm. It can be used to restrict access to buildings or certain areas based on individuals' temperatures. The module supports remote temperature measurement, displaying the readings on entrance panel and internal monitor screens, and features metal protective casing, economical energy consumption, and a variety of connectivity options.

BAS-IP bas-IP SH-31TM Temperature Module is designed to measure human body temperature in real time with high precision (±0.3°C or better) from a distance of 10 to 40 mm. It can be used to restrict access to buildings or certain areas based on individuals' temperatures. The module supports remote temperature measurement, displaying the readings on entrance panel and internal monitor screens, and features metal protective casing, economical energy consumption, and a variety of connectivity options.

SH-31TM
USER MANUAL
TEMPERATURE MODULE
SH-31TM
Functionality
Device description
Main feature
Remote temperature measurement
Display of the visitor's temperature on the entrance panel screen
Display of visitors' temperature on the internal monitor screen
Metal protective case
Powered by the entrance panel
Economical energy consumption
Power supply: + 12 V (±15%) DC
Current consumption: 0.034 A (max)
Power consumption: 0.4W (max)
Measuring distance: 10 — 40mm
Measuring range: 30 — 45°C
Measurement accuracy: 0.1°C
Maximum deviation: ≤0.3°C
Working temperature: 6 — 47°C
Operating humidity: 20 — 73%
Protection class: IP30С
Dimensions: 27 x 87 x 45 mm
Weight: 132 g
TEMPERATURE MODULE
The module is designed for non-contact measurement on the wrist.
Fast detection of abnormal temperatures in real time.
wiki.bas-ip.com
Full User Manual
Completness check of the product
Before installing the module, be sure to check that it is complete and all
components are available.
The module kit includes:
1 pcTemperature module
Sticker on the housing indicating the correct
position when measuring
Mounting bracket for overhead mounting 1 pc
2 pcs
Module mounting screws
2 pcsBracket mounting screws
1 pc
Four-wire connection wire 1 pc
Manual 1 pc
Connection options
123
+12V GND Lock
LAN
Power
123
NC COM
Relay outputs to lock
4 5
NC NO
Wiegand output
123
+5V D0
4
GND D1
RS485
123
+12V 485+
4
GND 485-
Exit Button/Door Sensor
123
Exit Din
4
GND DS
RS232 (Option)
Green
RX
Black White
GND TX
COM
Brown (-)
Blue (+)
Black (-)
Red (+)
EAN: 5060514914533
Mechanical mounting
The module is not intended for installation in unheated rooms, as well as in places
where it will be affected by direct sunlight and precipitation.
Installation in heavily dusty rooms is not recommended.
Installation in rooms with aggressive environments is prohibited.
Module dimensions
87 mm
FRONT LEFT SIDE TOP
Wall Module
140-150 cm
27 mm45 mm27 mm
87 mm
45 mm
Warranty
The warranty card number
Model name
Serial number
Seller name
With following stated terms of warranty is familiar, functional test was
performed in my presence:
Customer signature
Warranty conditions
Transportation of product must be in its original packaging or supplied one
by the seller.
The product is accepted in warranty repair only with a properly filled warranty
card and the presence of intact stickers or labels.
The product is accepted for examination in accordance with the cases
provided by law, only in the original packaging, in a full complete set,
appearance corresponding to the new equipment and presence of all relevant
properly filled documents.
This warranty is in addition to the constitutional and other consumer rights
and in no way restrict them.
Terms of warranty
The warranty card must indicate the name of the model, serial number,
purchase date, name of the seller, seller company stamp and
the customer’s signature.
Delivery to the warranty repair is carried out by the buyer himself.
Warranty repairs carried out only during the warranty period specified
in the warranty card.
The service center is committed to do everything possible to carry out
the repair warranty products, up to 24 working days. The period spent
on the restoration of product functionality is added to the warranty period.
The warranty period of the product — 36 (thirty-six) months from the date of sale.
EAN: 5060514914533
Notes
Notes
www.bas-ip.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

BAS-IP SH-31TM Temperature Module User manual

SH-31TM Temperature Module
Brand
BAS-IP
Model
SH-31TM Temperature Module
Type
User manual
This manual is also suitable for

BAS-IP bas-IP SH-31TM Temperature Module is designed to measure human body temperature in real time with high precision (±0.3°C or better) from a distance of 10 to 40 mm. It can be used to restrict access to buildings or certain areas based on individuals' temperatures. The module supports remote temperature measurement, displaying the readings on entrance panel and internal monitor screens, and features metal protective casing, economical energy consumption, and a variety of connectivity options.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents