BLOCK PART
Product Manual
- Temporarily cancels the Lock function. It is used when leaving the vehicle in a parking
lot, without the need to indicate the location of the Reset button (secret) to the valet.
VALET Function:
Operation
- After 50 seconds, the LED ashes and the siren goes off if installed (not included),
another 20 seconds the progressive block initiates. Denitive blockage occurs after
another 30 seconds.
To cancel the valet function, turn on the ignition and press the Reset button for 1 second,
The LED will ash 1x (once) conrming cancellation.
- With the ignition off, hold the Reset button until the LED ashes 2 times (5 seconds).
Block Function:
- Activates when opening and closing the door with the ignition on and not pressing the
RESET button.
- To CANCEL the LOCKOUT, press the RESET button at any time, the LED will ash 1(once)
to indicate the lockout cancellation..
Installation Scheme
4 - Green - Ground Signal Door Switch
5 - Black/Yellow - Alarm Siren Output
6- Red +12V
9 - Black- GND
3 - White/Black- LED +
2 - White/Black - Reset Button 8 - Black- LED GND
7 - Black- GND
10 - Blue - POST IGNITION
RESET
BUTTON
BLOCK
MAX 20A
1 - Green/White - Positive Signal Door Switch
LED
Technical Features
Supply Voltage
Consumption
Engine Lock
Siren Output
9 a 15 Volts
1 a 6 mA
Max. 20A
Only Use Dedicated Siren
Natural wear components, such as batteries and others;
In the event of a defect within the warranty period, TARAMPS' liability is limited to
repairing or replacing the device manufactured by it.
Scratched or torn warranty seal;
Cases where the product is not used under regular conditions;
This warranty excludes:
Defects caused by accessories, modifications or equipment attached to the product;
Damages of any type, resulting from problems with the product, as well as losses caused
by discontinuation of use.
TARAMPS, located at Rua Abílio Daguano, 274 Res. Manoel Martins - Alfredo Marcondes
- SP, ZIP 19.180-000, guarantees this product against design, manufacturing, assembly
and/or joint and several defects due to design flaws that make it unsuitable or
inappropriate for its intended use, for a period of 24 months from the date of purchase.
Products damaged by incorrect installation, water infiltration, tampering by
unauthorized individuals;
The product presents damage resulting from drops, impacts or the action of agents of
nature (floods, lightning, etc.);
Costs of removal and reinstallation of the equipment, as well as its transport to the
technical assistance post;
Warranty terms
Technical Support
A Taramps reserves the right to change the contents of this manual without prior notice or obligation to apply
the modications to previously produced units.
Taramps Electronics - Rua: Abílio Daguano, nº 274 - ZIP 19.180-000
Phone Number +55(18) 3266-4050 / 99749-3391
Factory technical assistance department:
E-mail: ser[email protected]
MN_012493_R02
Fabricado por / Manufactured by:
TARAMPS ELECTRONICS LTDA
CNPJ / TAX ID: 11.273.485/0001-03
R. João Silvério, 121• Res. Manoel Martins
Alfredo Marcondes - SP
Indústria Brasileira - Made in Brazil
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Taramp's MD50001 User manual
-
Taramp's HD30001 User manual
-
Blue Bird M380 2003 Owner's manual
-
Directed Electronics 556U Owner's manual
-
Directed Electronics 28624TN Owner's manual
-
-
Rattler 310D Owner's manual
-
Python Python 502 Owner's manual
-
Directed SmartStart 5000 Series Owner's manual
-
AutoWatch 446 Product information
