Item No. Description Drilling Required Weight Height Width Depth
7160-0448
Camera/Display bracket mounted using
the passenger side visor retainer for
Chevrolet Caprice PPV vehicle only
Yes - Attaches to the existing passenger side visor retainer
Chevrolet Caprice PPV, recommended to use self tapping screws
for additional stability
2.8 lbs 2.37” 2.56” 12.73”
7160-0449
Camera bracket mounted using the
passenger side visor retainer for
Chevrolet Caprice PPV vehicle only
Yes - Attaches to the existing passenger side visor retainer of the
Chevrolet Caprice PPV, recommended to use self tapping screws
for additional stability
1.3 lbs 2.37” 2.56” 9.37”
M OBILE A LL AX IS
mymax3.com
Every gadget needs me.
With an all metal construction, all axes movement and ability to hold
a wide range of devices, MAX
3
is more versatile, more durable and
more exible.
• Will support cameras and or displays up to three pounds
• Passed shock and vibration testing to MIL STD 810 G
• Display extension allows for use of passenger side visor (if
extension is not used the visor will remain in the stowed position)
• Display hole pattern supports VESA and AMPS mounting
• All axes range of motion in X axis (left/right), Y axis (front/back) and
Z axis (up/down) allows you to position the camera and display at
any angle
• Encapsulated ball design o ers theft deterrence
This document, including images, may not be reproduced partly or fully without the expressed written consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson, LLC
3001 Borham Ave
Stevens Point, WI 54481
Phone: 877-412-6583
Fax: 715-344-8845
Shown: 7160-0449
MAX
3
Camera Chevrolet Caprice PPV Visor Mount
Camera Chevrolet Caprice PPV Visor Mount
Shown: 7160-0448