2. Computers & electronics
  3. Audio & home theatre
  4. Home audio sets
  5. Philips
  6. HTS3011
HTS3011

Philips HTS3011, HTS3011/37 User manual

  • Hello! I am an AI chatbot trained to assist you with the Philips HTS3011 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
3
Enjoy
Start disc playback
A Press ç to open the disc tray.
B Place a disc with the disc label facing up.
C Press ç to close the disc tray.
D Playback starts automatically.
E If the disc menu appears on the TV, use 
keys or the numeric keypad to select an option in
the menu and press OK to start playback.
F Press
to stop playback.
Note When you press u button,
playback resumes from where it last stopped.
To start playback from the beginning, you
have to press .
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theater System.
2008 C Philips Consumer Electronics
A Division of Philips Electronics North America Corp
P.O. Box 671539 Marietta, GA 30006-0026
All rights reserved.
Printed in China
Listen to radio
A Press RADIO.
The display panel will show “AUTO INSTALL ....
PRESS PLAY”.
B Press u.
All the available radio stations with strong reception
signal will be stored automatically.
Note This feature is only available for the  rst time
setup. If you wish to reinstall all the radio stations,
press and hold REPEAT (PROGRAM) until ‘START’
appears on the display panel.
C Once complete, use íë keys or numeric keypad
(0-9) to select a preset radio station.
D To delete a preset radio station, press and hold x
until “FM X DELETED” appears.
Experience surround sound
A Press SURROUND to switch between Multi-
Channel, Stereo sound or Party sound.
B Press SOUND MODE +- to select a preset
digital sound effect.
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
Connect
Set up
Enjoy
1
2
3
HTS3011
Main Unit
Remote Control
and 2 batteries
User
Manual
1 center, 2 front, 2 rear speakers
and subwoofer
FM wire antenna
Composite
video cable
What’s in the box?
hts3011_37_qsg_eng3_final809.ind1 1hts3011_37_qsg_eng3_final809.ind1 1 2008-02-26 1:51:03 PM2008-02-26 1:51:03 PM
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
FRONT
RIGHT
FRONT
LEFT
CENTER
REAR
RIGHT
REAR
LEFT
SUBWOOFER
A Place the center speaker above or close to the TV.
B Place the subwoofer on the floor, at least one metre
away from the TV.
C Place the front speakers at equal distances from the
TV.
D Place the rear speakers at the back or beside the
listening position.
B
Connect the main unit to TV
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
Y
z
Use the supplied composite video cable to connect
the CVBS jack on the main unit to the VIDEO IN
jack on your TV.
Note It is important to connect the main unit
directly to your TV.
2
Set up
C
Connect the speakers and subwoofer
Connect the various colored cables from the speakers
and subwoofer to the same colored jacks at the rear of
the main unit.
A
Finding the viewing channel
A Press STANDBY-ON on the main unit to turn it
on.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
° button) until
you see the Video In channel. If you are using a RF
modulator, set the TV to channel 3 or 4.
B
Select the display language on the
screen
A Press OPTIONS.
The { General Setup } appears.
B Press
.
Press OPTIONS to exit menu
General Setup
Disc Lock
Display Dim
OSD Language
Screen Saver
DivX(R) VOD Code
Sleep
Français
Español
English
C Use  keys to select { OSD Language } and press
.
D Use  keys to select a language option in the
menu and press OK to confirm.
E Press OPTIONS to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theater system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this Home Theater
System. Refer to the user manual for more information.
D
Connect the radio antenna and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
B
A
A Connect the FM antenna (supplied) to the inner pin
of the FM 75 socket. (For some models, it has
been connected in the factory.) Extend the wire for
optimum reception.
B Connect the power cable from the main unit to the
AC power outlet.
E
Connect audio output from TV
(optional)
To hear the TV audio through this unit, use a red and
white audio cables (not supplied) to connect the AUDIO
IN-AUX jacks on the main unit to the AUDIO OUT
jacks on your TV.
AUDIO
OUT
AUDIO IN
AUDIO
OUT
AUDIO OUT
Note When watching the TV programs, you can
press AUX repeatedly on the remote control until
‘AUX 1’ or ‘AUX 2’ is displayed to get the sound
output from the speakers.
Television (rear)
Main Unit (rear)
Main Unit (rear)
FM antenna
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
FRONT CENTER
Main Unit (rear)
Main Unit (Front)
TV (rear)
hts3011_37_qsg_eng3_final809.ind2 2hts3011_37_qsg_eng3_final809.ind2 2 2008-02-26 1:51:06 PM2008-02-26 1:51:06 PM
/