Epson 1000 ICS User guide

Brand: Epson

Model: 1000 ICS

Category: Multifunctionals

Type: User guide

This manual is also suitable for

1000 ICS All-in-One Printer

EPSON

1000 ICS

Basics

EPSON Ink Jet Papers and Ink Cartridges

Use EPSON paper and inks to get the same photo quality results that have earned EPSON’s printers all

of their awards! EPSON papers are specially coated to work with EPSON’s quick drying inks. You’ll

notice that when prints come out of your printer, you can immediately handle them. There is no

drying time, no smearing or smudging, and your image is crisp and smooth. Here are the inks for your

printer and just a few of EPSON’s papers:

Glossy Photo Paper and Panoramic

Photo Paper

Photo lab quality, heavier weight glossy paper available in a

variety of sizes. Perfect for color photo keepsakes of

snapshots, framed art, banners, and panoramics.

Matte Paper - Heavyweight

Heavyweight, bright white, ultra smooth coated paper with matte finish. Perfect

for photographs, signs, and crafts.

Photo Quality Ink Jet Paper

Bright white, with a smooth matte finish to create your best impression.

Perfect for presentations, newsletters, color reproductions, and all your photo

and craft projects.

EPSON Ink Cartridges

For best results, always use genuine EPSON ink cartridges.

Black T017

Color T018

For more information on other EPSON products and fun project ideas,

look for the EPSON Print Lab

Series at

www.epson.com

See the inside back cover for a list of EPSON papers and ink cartridges, and ordering information.

,QVGIUWIP3DJH7KXUVGD\0DUFK30

any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior

written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for

use with this EPSON product. EPSON is not responsible for any use of this information as applied to other

equipment.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third

parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse,

or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the

U.S.) failure to strictly comply with SEIKO EPSON CORPORATION’s operating and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any

options or any consumable products other than those designated as Original EPSON Products or EPSON

Approved Products by SEIKO EPSON CORPORATION.

A Note Concerning Responsible Use of Copyrighted Materials

Digital cameras, scanners, and ink jet printers, like conventional photocopiers and cameras, can be misused by

improper copying or printing of copyrighted material. While some countries’ laws permit limited copying of

copyrighted material in certain circumstances, those circumstances may not be as broad as some people assume.

EPSON encourages each user to be responsible and respectful of the copyright laws when using digital cameras,

scanners, and ink jet printers.

Trademarks

EPSON and EPSON Photo Stickers are registered trademarks and EPSON Smart Panel is a trademark of SEIKO

EPSON CORPORATION.

PhotoEnhance is a trademark and EPSON Connection, EPSON PhotoCenter, EPSON Store, Print Lab, and

SoundAdvice are service marks of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of

their respective owners. EPSON disclaims any and all rights in those marks.

The E

NERGY

TAR

emblem does not represent EPA endorsement of any product or service.

Printed on recycled paper CPD-13965

3/02

iii

Contents

Welcome!

About Your Software

About Your Documentation

Warnings, Cautions, Notes, and Tips

Viewing Your Electronic Reference Guide

Copying

Stand-alone Copying

Changing Copy Settings

Making Copies With the Computer

Printing

Loading Paper

Opening the Printer Software

Selecting Printer Software Settings

Selecting Default Print Settings for All Applications

Controlling Printing

Using PhotoEnhance, Custom, and Advanced Settings

Enhancing Photos

Using Custom Project Types

Using Advanced Settings

Using Special Papers

EPSON Matte Paper - Heavyweight

EPSON Glossy Photo Paper

Printing on Envelopes

Selecting the Correct Media Type

Scanning

Placing Your Original Document

Scanning to a File in EPSON Smart Panel

One-Touch Scanning

Advanced Scanning With EPSON TWAIN

Maintenance

Cleaning the Print Head

Aligning the Print Head

Replacing an Ink Cartridge

Checking the Ink Supply

Purchasing Ink Cartridges

Ink Cartridge Precautions

Removing and Installing Ink Cartridges

Cleaning the EPSON 1000 ICS

Transporting the EPSON 1000 ICS

Problem Solving

Identifying Parts

Diagnosing Problems

Checking the Control Panel Error Messages

Printing a Nozzle Check

Problems and Solutions

Setup and Software Installation Problems

Printing and Copying Problems

Scanning Problems

Problems with Paper Feeding

Print Quality Problems

Scan Quality Problems

Uninstalling and Reinstalling Your Software

Where To Get Help

EPSON Technical Support

Software Technical Support

Requirements and Notices

Windows System Requirements

ENERGY STAR Compliance

Important Safety Instructions

Ink Cartridge Safety Instructions

FCC Compliance Statement

Declaration of Conformity

Epson America, Inc. Limited Warranty

Index

Welcome!

Your EPSON

1000 ICS is an ideal device for copying, scanning, and printing.

About Your Software

About Your Documentation

To set up your EPSON 1000 ICS and install its software, see the Start Here poster.

This book contains instructions on copying, printing, scanning, maintenance and

troubleshooting. For additional information, see your electronic Reference Guide, as

described on page 2.

Warnings, Cautions, Notes, and Tips

EPSON TWAIN

Scanner driver with powerful features for controlling every

aspect of your scan.

EPSON Smart Panel,

™

by NewSoft

™

An easy, step-by-step interface for scanning, copying, printing,

and more.

ArcSoft

™

PhotoImpression

™

Software for editing, retouching, or enhancing images and

printing images with templates, frames, and borders.

Warnings must be followed

carefully to avoid bodily injury.

Cautions must be observed to

avoid damage to your equipment.

Notes contain important

information about your

EPSON 1000 ICS.

Tips contain additional hints for

better scanning and printing.

About Your Documentation

Viewing Your Electronic Reference Guide

Your software CD-ROM includes an electronic Reference Guide for your product that

you installed when you installed your software (see the Start Here poster for details).

The manual is in HTML format, so you need a browser—such as Microsoft

Internet

Explorer 3.0 or later, or Netscape Navigator

3.0 or later—to view it. If you are using

a different browser, the pages may not display correctly.

A browser is not included on the EPSON 1000 ICS CD-ROM.

You can view your electronic Reference Guide from your hard drive: click

Start > All

Programs

EPSON

Online Reference Guide

Online Reference

Guide

When you open the Reference Guide, you see this screen:

Click a topic on the left to expand the table of contents.

After expanding the table of contents, you can click on the topic you want to view.

If there’s a right arrow , click it to view subtopics, then click on a topic to go to it.

Click the down arrow to close a subtopic list.

If you see an icon in place of a graphic when viewing your Reference

Guide in Netscape Navigator, click the Reload button to load the graphic.

closed list,

click to

expand

click to go

to topic

Copying

Your EPSON 1000 ICS lets you make copies without ever turning on your computer.

You can also make copies by using the Copy utility in EPSON Smart Panel.

Stand-alone Copying

1. Make sure the EPSON 1000 ICS is on and paper is loaded in the sheet feeder.

2. Place your document face-down on the glass and close the cover.

3. Press the green x

Copy

button. Your document is scanned and printed.

Stand-alone Copying

Changing Copy Settings

You can change Copy settings on the Control Panel as described below.

■

Change the number of copies by pressing the Value buttons.

■

Choose color or black and white copies by pressing the

B&W/Color

button.

■

To change the print quality: press one of the Menu buttons to select the print

quality menu, then use the Value buttons to select

Normal

Fine

Photo

, or

Economy

■

To change the paper size: press one of the Menu buttons to select the paper size

menu, then press the Value buttons to select

Letter

Executive

Half Letter

, or

■

To reduce or enlarge your image to fit on a smaller or larger size of paper, press

one of the Menu buttons to select

Reduce/Enlarge

, then press the Value buttons

to choose the paper sizes for your source image and copy.

■

To manually reduce or enlarge your image, press one of the Menu buttons to

select

Zoom In/Out

, then press the Value buttons to choose a percentage of the

scanned image for the resulting print.

■

To lighten or darken your copies, press one of the Menu buttons until you see

Lighter/Darker

. Press the Value buttons to adjust the setting.

■

To reduce the bottom margin, press one of the Menu buttons until you see

Bottom Margin

, then press the − Value button.

■

Go back to the main menu by pressing the y

Stop

button.

■

Check your settings, then press the x

Copy

button to make your copy.

To clear a setting, press the Clear button. To clear all the setting changes

you’ve made, press the Clear button and hold it down for at least

3 seconds.

Copies

Value

Clear

Clear all

(3sec.)

Scan

B&W

Color

Copy

Stop

B&W/ Color button

Scan button

Copy button

Stop button

Menu buttons

Value buttons

Copying

Making Copies With the Computer

1. Make sure the EPSON 1000 ICS is on and that paper is loaded in the sheet

feeder.

2. Place your document face-down on the glass and close the cover.

3. Open EPSON Smart Panel: click

Start

All Programs

Programs

EPSON

Smart Panel

EPSON Smart Panel

4. Click the button for the Copy Utility.

You see the Copy Settings screen.

5. Adjust any of the following copy settings:

■

Source type: choose

Photo & Text

Photo

, or

Text

■

Size: Choose the setting based on your original and your copy, or click

Manual

and enter a percentage to reduce or enlarge your copy by a specific

amount.

■

Lighten or darken the image by clicking the up and down arrows

■

Type in a new number of copies or click the up and down arrows

Making Copies With the Computer

6. Click the

Device Settings

button.

You should see your EPSON 1000 ICS chosen as the output device and EPSON

TWAIN FB (your scanning software for the EPSON 1000 ICS) chosen as the

input device. Click the

Settings

button for additional print options including

settings for different types of paper. (See “Selecting Printer Software Settings” on

page 9 for details.)

7. Click the

Image Adjust

button to enhance your image or add effects:

■

Enable or disable the automatic document enhancement feature

■

Add a sepia, blue, or black and white filter

■

Adjust brightness, contrast, or saturation levels

8. Click the

Copy

button to start copying.

Printing

This section describes the basic steps for printing with your EPSON 1000 ICS.

Loading Paper

Make sure your EPSON 1000 ICS and computer are turned on.

Place your paper against the right edge of the sheet feeder and slide the left edge guide

against the paper. (Don’t push the paper deeper into the feeder.)

Follow these guidelines when loading paper:

■

Load the printable side face-up. It’s usually whiter or brighter than the other side.

■

Load letterhead or preprinted paper into the EPSON 1000 ICS top edge first.

■

Don’t load paper above the mark on the left edge guide.

If you’re printing on envelopes, see page 15 for loading instructions.

slide the left edge guide

against the paper

slide paper

against the

right edge

Opening the Printer Software

After you open your application program and create your document, you’re ready to

select your printer software settings.

From the File menu, click

. You see your application’s Print dialog box (your

dialog box may look slightly different):

Make the following selections on the Print dialog box:

■

Make sure

EPSON 1000 ICS

is selected.

■

Click the

Preferences

Properties

button. (If you see a

Setup

Printer

, or

Options

button, click it. Then click

Preferences

Properties

on the next

screen.)

If you click the print icon on your application’s tool bar instead of selecting

Print from the File menu, you may not get the option to change the printer

software settings before printing.

click here to

open your printer

software

select your

EPSON 1000 ICS

here

Printing

Selecting Printer Software Settings

Once you click

Properties

, you see your printer software dialog box.

The most important thing to remember is to set the correct Media Type for the paper

you’re using. If necessary, click the

Main

tab to display the settings shown below:

Make the following settings on the Printing Preferences or Properties dialog box:

■

Choose the paper you’re printing on (click the

arrow to scroll through the

Media Type

list).

If you’re not sure which setting to select, see

page 16.

■

Set the Ink option to

Color

to print a color

document. To print a black text document,

click

Black

■

Set the Mode option to

Automatic

. It’s the

easiest way to get good printing results on all types of paper.

■

Set the slider in the Mode box to

Quality

Speed

to select high-quality printing,

faster printing, or an in-between setting. (The slider may not be available for your

paper type.)

■

Click

to return to your application’s Print dialog box.

select higher-quality or faster

printing, or in-between

select the type of paper you loaded

select Automatic mode

select the Ink color

click OK

Controlling Printing

Selecting Default Print Settings for All Applications

The printer settings you make apply only to the application you’re currently using. If

you usually print one type of document in different applications—for example,

legal-sized documents with black ink—you can change the default printer settings for

all your programs. You do this using the Windows Printers utility.

1. In Windows XP, click

Start

Control Panel

Printers and Other Hardware

Printers and Faxes

In Windows 2000, Windows Me, or Windows 98, click

Start

Settings

Printers

2. Right-click the

EPSON 1000 ICS

icon.

3. Select

Printing Preferences

(Windows XP or Windows 2000) or

Properties

(Windows Me or Windows 98). Then click the

Main

tab.

4. Select the default settings you want to use for all your applications. Click

when you’re finished.

Remember that you can always change the settings in your application when you want

to print different types of documents.

Controlling Printing

At the Print dialog box, click

(or

) to start printing.

click Print to start

printing

Printing

After a moment, the Progress Meter appears and shows the progress of your print job

and how much ink you have left. Use the buttons to cancel, pause, or restart printing.

For more advanced printer settings, see the next section. For more information on

printing—for example, previewing your printout, changing the paper size, or adding a

watermark—see your electronic Reference Guide (described on page 2).

Using PhotoEnhance, Custom, and

Advanced Settings

When you’re printing special projects, you can customize your printer software

settings, as described in these sections below.

For additional information on these settings, see the electronic Reference Guide, as

described on page 2.

click to cancel printing

may be dimmed

(unable to show

ink status) if

printing over

network

click to pause or resume

printing

Using PhotoEnhance, Custom, and Advanced Settings

Enhancing Photos

The printer software includes PhotoEnhance

™

options that adjust image brightness

and contrast to improve the appearance of low-resolution and improperly exposed

photos. You can also use PhotoEnhance to add special effects.

If you’re printing high-resolution images, you may want to use the

Automatic setting instead, as described on page 9.

PhotoEnhance does not affect your original image; it only affects your

printout. Printing with PhotoEnhance may take longer on some systems.

To use PhotoEnhance, you must select Color ink; you cannot turn on

PhotoEnhance with Black ink selected.

To use PhotoEnhance, set the Mode option to

PhotoEnhance

in your printer settings dialog box.

If your photograph was taken with a digital camera, you

can select

Digital Camera Correction

to give your

printed images the appearance of photographs taken

with a film camera.

For more fine-tuning, you can select from a list of

specialized settings for photographs, such as

People

Nature

or select special filters,

such as

Soft Focus

or a

Sepia

tint.

Using Custom Project Types

Your printer software includes custom project types with preset printing options. This

lets you quickly select the best settings for your type of document, or select a

color-matching method for your project.

To access the project types, click

Custom

, then click the

Custom Settings

list to open it. Then select one of these

settings:

■

Text/Graph

: For printing graphics-intensive

documents like presentations with charts and

graphs.

■

Economy

: For printing rough drafts of text on plain

paper. Saves ink.

Printing

■

ICM

(Image Color Matching): For printing documents created in an ICM

compatible application.

■

sRGB

(standard Red Green Blue): For printing documents created in an sRGB

compatible application using sRGB colors, such as those designed for the World

Wide Web. See your Windows online help for details.

You can also fine-tune these settings on the Advanced dialog box to fit

your individual needs, as described below.

Using Advanced Settings

For maximum control over your project, you can customize your print settings—such

Print Quality

and

Gamma

—and use special effects.

To access these settings in your printer software, click

Custom

and then click the

Advanced

button. You see the Advanced dialog box.

After you customize your print settings on the Advanced dialog box, you can save

them as a group so you can reuse them whenever you print a similar project. For

details on all the settings, click

Help

on-screen or see your electronic Reference Guide

(as described on page 2).

The default Gamma setting of 1.8 provides the optimum contrast quality

for your photos. However, you can change it to either 1.5 (for decreased

contrast) or 2.2 (for increased contrast; recommended for matching colors

with sRGB devices).

Using Special Papers

How can you get the best-looking photos, most vivid colors, and sharpest text? Always

use EPSON’s special ink jet papers. Instructions for printing on a couple of our most

Epson 1000 ICS User guide

Brand: Epson

Model: 1000 ICS

Category: Multifunctionals

Type: User guide

This manual is also suitable for

1000 ICS All-in-One Printer

Download PDF

report

Epson 1000 ICS User guide

This manual is also suitable for

Epson 1000 ICS User guide

Related papers

Other documents