Konica Minolta Dimage V Owner's manual

Type
Owner's manual

This manual is also suitable for

E
Software Instruction Manual
a
©1997 Minolta Co., Ltd.
under the Berne Convention and
Universal Copyright Convention
Edited in Germany
9222-2755-37 (P9704-A704)
Macintosh Version
Minolta (UK) LTD. Photographie Division
Precedent Drive, Rooksley, Milton Keynes, MK13 8HF, England
Tel. 01 908 200 400
Fax. 01 908 208 334
Minolta (IRL) Ltd. (Photopak Sales)
241 Western Industrial Estate, Naas Road, Dublin 12, Ireland
Tel. 01 45 66 400
Fax. 01 45 00 452
Minolta Portugal Lda
Rua Afonso Lopes Vieira 55-B, P-1700 Lisboa, Portugal
Tel. 01 793 10 06
Fax. 01 793 10 64
http://www.minolta.com
http://www.minolta.de/europe
Digital Camera
1
Thank you for purchasing the Minolta Dimâge V with the Dimâge V
Image Control Software. The Dimâge V control software is the driver
software for exchanging data between your Macintosh and the
camera. The software lets you:
Display thumbnail previews of images on the computer monitor.
Copy images to the camera, your hard disk, or removable media
such as floppy disks.
Delete images stored on the image memory card.
Edit images copied to the hard drive or removable media. Try
cropping, rotating adjusting brightness/contrast, or another editing
function.
Print your images.
Save your images in a variety of convenient file formats.
Trigger the camera's shutter remotely with the Macintosh.
Make time lapse movies with Dimâge V images.
This instruction manual may not be copied in part or whole without prior permission
from Minolta Co., Ltd.
© 1997 Minolta Co., Ltd.
Every necessary precaution has been taken to ensure the accuracy of this manual.
Please contact us if you have any questions, find any mistakes, or notice missing
information.
Minolta is not responsible for loss, damage, or other results caused by operation.
No part of books, magazines, music, or other productions that were released under
a copyright may be used, copied, or changed without the prior permission from the
author, copyright holder, or the successor to the copyright holder except for
personal, home, or equivalent use.
Please take the time to read through this instruction manual so
you will be able to take full advantage of the features.
This manual assumes you have a working knowledge of the
Macintosh and its operating conventions. Familiarity with the
mouse and standard Macintosh menus and commands is
necessary before operating the Dimâge V control software.
This manual does not instruct in the:
• basic use of the Macintosh or its operating system.
• use of Adobe PhotoDeluxe™.
Please refer to the Apple Macintosh user's guide or the on-line
help guide in the Adobe PhotoDeluxe™ application.
Instructions for installing Adobe PhotoDeluxe™ start on page 84
of this manual. Instructions for using Adobe PhotoDeluxe™ are
built into the PhotoDeluxe™ software.
Macintosh
®
, the Apple logo, Apple
®
, Power Macintosh
®
, QuickTime
®
and
AppleTalk
®
are registered trademarks of Apple Computer, Inc.
Adobe
®
and Adobe
®
PhotoDeluxe™ are registered trademarks of Adobe Systems
Incorporated.
SmartMedia™ is the registered trademark of Toshiba Corporation.
Other company names and product names are the trademarks and registered
trademarks of their respective companies.
TABLE OF CONTENTS
2 3
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Checking the Packing List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
CONNECTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
INSTALLING THE SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . .10
QUICK OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Viewing and Retouching Images . . . . . . . . . . . . . . . . . . . . . . . .14
Operating the Camera with the Computer . . . . . . . . . . . . . . . .16
LAUNCHING THE SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . .18
VIEWER PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Opening the Viewer Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Copying Selected Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Copying All Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Deleting Selected Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Deleting All Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Sorting Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Drag and Drop - Copying Images . . . . . . . . . . . . . . . . . . . . . . .34
Drag and Drop - Deleting Images . . . . . . . . . . . . . . . . . . . . . . .35
Displaying the Full Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
IMAGE PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Opening the Image Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Magnifying or Reducing the View . . . . . . . . . . . . . . . . . . . . . . .39
Cropping Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Adjusting Brightness and Contrast . . . . . . . . . . . . . . . . . . . . . .42
Adjusting Color Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Subtle Brightness Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Sharpening and Softening . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Flipping Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Rotating Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Printing Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Saving Images - File Formats . . . . . . . . . . . . . . . . . . . . . . . . . .49
Saving Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
DIMÂGE V MAIN PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Opening the Dimage V Main Panel . . . . . . . . . . . . . . . . . . . . . .53
Displaying Camera Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Remote Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Exposure Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Resetting the Camera Date/Time . . . . . . . . . . . . . . . . . . . . . . .59
Formatting Image Memory Cards . . . . . . . . . . . . . . . . . . . . . . .60
Copying: From the Mac to the Camera . . . . . . . . . . . . . . . . . . .62
Creating a Time Lapse Movie . . . . . . . . . . . . . . . . . . . . . . . . . .64
MOVIE PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
The Movie Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Display Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Playback Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Drag and Drop - Creating a Time Lapse Movie . . . . . . . . . . . .70
Changing the Movie File Format . . . . . . . . . . . . . . . . . . . . . . . .73
Recompressing Movie Files . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
TROUBLE SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
ADOBE PHOTODELUXE™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Installing PhotoDeluxe™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Installing the QTIC Plug-in Module . . . . . . . . . . . . . . . . . . . . . .85
BEFORE YOU BEGIN
4 5
CHECKING THE PACKING LIST
Check the packing list before you begin. If some parts are missing,
contact your camera dealer or a Minolta Service Facility listed on the
front cover of this manual.
Items you will need to operate the Macintosh software:
"Dimâge V Image Control” Windows/Macintosh CD-ROM
(Software for Windows and Macintosh)
"Dimâge V Instruction Manuals” Windows/Macintosh CD-ROM
(Software Windows/Macintosh and Digital Camera Dimâge V)
Serial Cable SC-422 for the Macintosh
Image Memory Card RM-2S
Dimâge V Digital Camera
4 AA Batteries
Other items included in the package
:
Adobe
®
PhotoDeluxe™ CD-ROM
Lens Extension Cable LC-V100
Camera Case CC-V1
Hand Strap HS-V1
Serial Cable SC-232C for Windows
Quick Reference Guide
Warranty card
BEFORE YOU BEGIN
6 7
SYSTEM REQUIREMENTS
To use the Dimâge V Control software you need:
An Apple Macintosh computer with a 68030 processor and a
minimum clock speed of 25Mhz or an Apple Power Macintosh.
Apple system software 7.5 or later.
A minimum of 12MB (megabytes) available RAM (random access
memory). A minimum of 16MB available RAM when using a Power
Macintosh.
A minimum of 20MB available hard disk space.
Monitor with a display area of 640 x 480 pixels or greater.
QuickTime, version 2.0 or higher.
A CD-ROM drive.
Power Macs using PCI slots:
For Power Macintosh 7200/80, 7500/100, and 8500/120 please
use Open Transport 1.1 (or later) or use Apple System Software
7.5.3 (or later).
CONNECTING
8 9
Use the SC-422 serial cable, included in this package, to connect the
Dimâge V to the Macintosh.
1. Turn off the Dimâge V
and the Macintosh.
2. Put the lens in the
standard lens position
(the lens is rotated
forward 90° until it
stops).
3. Plug one end of the
serial cable into the
digital in/out of the
Dimâge V.
Both ends of the serial cable are
the same.
Note the pin configuration before
plugging in the serial cable.
4. Plug the other end of the
serial cable into either the
Macintosh's modem port
or printer port.
Make sure the cable is securely
attached to the camera and the
computer.
. Most Macintosh desktop models are equipped with two serial
ports, a modem port and a printer port. When possible, use the
modem port to connect the Dimâge V.
. The serial port allocated for LocalTalk (usually the printer port)
may not operate normally with the Dimâge V connection. If your
printer port is allocated for LocalTalk, turn AppleTalk "Off" (select
Chooser in the
A menu) before connecting the Dimâge V via the
printer port.
. Some Macintosh models (PowerBook, PowerBook Duo) have only
one serial port, the printer port.
. With 68K series CPUs, always turn AppleTalk "Off" (select
Chooser in the A menu) before connecting the Dimâge V.
MODEM PORT
PRINTER PORT
INSTALLING THE SOFTWARE
10 11
WARNING - BEFORE INSTALLATION
Some antivirus system extensions conflict with the operation of
this installer. Please remove or disable them before launching the
Minolta Dimâge Installer. Replace or re-enable them when
installation is complete.
1. Turn the computer on.
2. Quit any applications in use.
3. Insert the "Dimâge V Image Control” -CD-ROM
into the CD-ROM drive.
4. Double-click on the CD-ROM icon to open it.
• The contents of the CD-ROM should appear as pictured below.
6. Double-click on the “Minolta Dimâge V
Software” icon.
• The contents of the “Minolta Dimâge V Software” will appear:
8. Click on Continue....
The Software End-user License will appear. Read this license
carefully before installing the software.
If you do not agree to the conditions stated in the Software End-
user License Agreement, click on Disagree and the software will
not be installed.
9. Click on Agree.
• The Dimâge V Installer screen will appear.
Continued on next page.
5. Double-click on the Folder of the language you
want to install.
7. Double-click ion the “Installer” icon.
• The following screen will appear:
INSTALLING SOFTWARE
12 13
Choose the
install type.
Click to select
a folder
where the
software will
be saved.
Name of the hard drive and
folder where the software will
be saved.
8. Click on Select Folder... to change
folders/drives or to create a new folder.
9. Select the install type from the pop-up menu.
• The window below appears if custom install is selected.
Click on to
display
file information.
Select the files
to install by
clicking on the
check box next to
them (so an X
appears in ).
Click on to see the files listed under a folder title.
The icon will change to when a folder is open.
10. Click on Install.
• A bar indicating the percentage complete will appear.
• The message below appears when installation is complete.
11. Click on Restart.
WHERE TO FIND THE FILES
User-selected Destination Folder
+ Camera Access (application software)
+ Goodies (folder)
Extensions Folder
+ QuickTime™ IC (extension)
+ Minolta Dimage V (extension)
+ PhotoWare™ Extras (extension)
All the files listed above will be copied to the drive if Easy Install is
used. If Custom Install is used, only the user-selected files will be
copied onto the drive.
QUICK OPERATION
14 15
FOR VIEWING AND RETOUCHING IMAGES
Launch the application software (page 18).
The Minolta Dimâge V Main Panel will appear.
Click on Viewer... .
Double-click on the thumbnail to open the full-size image.
In the Viewer Panel:
Miniature previews of the images, called thumbnails, will appear.
Sort the thumbnail previews by title or date.
Copy all or selected images stored on the image memory card to
your hard drive or removable media.
Delete all or selected images on the image memory card.
+ Go to page 21 for more information.
The Viewer Panel will appear.
A full-size image will be displayed in the Image panel.
In the Image Panel:
Edit images (crop, adjust brightness/contrast, adjust color
balance, flip, rotate, sharpen edges, and soften edges).
Enlarge or reduce the view of images.
Print images.
+ Go to page 38 for more information.
Select Save as... from the File pull-down menu.
Enter the new file name.
Select the folder where the file is to be saved.
Select the file format.
Click on Save.
The image will be saved in the selected format.
Once the image is saved:
View the image in the Viewer Panel as a thumbnail preview.
Acquire the image into other application software.
Incorporate the image into an original post card or calendar
using Adobe PhotoDeluxe™, included in this package.
QUICK OPERATION
16 17
OPERATING THE CAMERA WITH THE COMPUTER
Launch the application software (see page 18).
The Dimâge V Main Panel will appear.
Select Record Mode from the Minolta Dimage V menu.
Set the flash mode and select the image
quality, then click on Capture.
In the Dimage V Main Panel:
Control the Dimâge V functions (recording, flash mode, image
quality mode, self-timer) with the computer.
Format SmartMedia™.
Display the data from the camera's information bar (frames
remaining/frames taken, low battery warning).
+ Go to page 52 for more information.
Open the viewer panel and double-click on
the thumbnail of the captured image.
The full-size image will be displayed in the image panel.
In the Image Panel:
Edit images (crop, adjust brightness/contrast, adjust color
balance, flip, rotate, sharpen edges, and soften edges).
Enlarge or reduce the view of images.
Print images.
+ Go to page 38 for more information.
Select Save as... from the File pull-down menu.
Enter the new file name.
Select the folder where the file is to be saved.
Select the file format.
Click on Save.
The image will be saved in the selected format.
Once the image is saved:
Display the preview of saved image in the Viewer Panel.
Acquire the saved image into another application.
Incorporate the saved image into an original post card or
calendar using Adobe PhotoDeluxe™, included in this package.
LAUNCHING THE SOFTWARE
18 19
1. Connect the camera to the Macintosh (p. 8).
2. Turn the camera on.
3. Start-up the computer.
4. Open the folder where the Camera Access
application was saved.
The application, Camera Access, will be in the folder you selected
or created when installing the software (p. 12).
5. Double-click on the Camera Access icon.
Double-click on
the application's
icon.
6. The Dimâge V Main Panel will appear as shown
below.
DIMMED OPTIONS
If the buttons, Capture, and Viewer... are dimmed (appear grey
instead of black and do not function when clicked), the camera is
either turned off or is not connected to the computer correctly. Check
the following points when the options are dimmed, then quit and
relaunch the application.
The Dimâge V is turned on.
The serial cable has been securely plugged into both the camera
and the computer (pp. 8-9).
An image memory card is in the camera.
The camera has not been connected to the serial port allocated to
LocalTalk (p. 9).
If the the options are still dimmed after launching, reinstall the
software (pp. 10-13).
20 21
VIEWER PANEL
VIEWER PANEL FUNCTIONS
The viewer panel displays miniature previews, called
thumbnails, of images. The viewer panel is similar to the
index display on the camera.
In the viewer panel, you can:
Display the thumbnail previews of images on the SmartMedia™
in the camera. You can also display previews of images
copied to your hard drive or removable media (p. 22).
Display an image full-size by double-clicking on the
thumbnail (p. 36).
Sort the previews on your hard drive or removable media
by title and date (p. 32).
Copy all or selected images stored on the SmartMedia™ in the
camera to your hard drive or removable media.
(pp. 24-27, p. 34).
Delete all or selected images from the SmartMedia™ in the
camera (pp. 28-31). You can also delete all or selected
images from a folder on your hard drive or removable
media (p. 35).
VIEWER PANEL
22 23
OPENING THE VIEWER PANEL
There are two ways to open the viewer panel; by displaying either the
images from the camera or images on your hard drive or removable
media.
To Display Camera Images:
Click on Viewer....
Click on the
button labeled
Viewer...
To Display Floppy Disk/Hard Disk Images:
1. Select Open Folder Viewer... from the File
menu.
2. Click once on the folder where the images are
saved, then click on the Select Folder button.
• Do not open the folder where the images are
stored.
Click once on the
folder to highlight it.
Click on the Select
Folder button.
The thumbnail representations of images stored on the image
memory card, Macintosh hard drive, or removable media are
displayed when the viewer panel is open.
Click on to view information about the image. The
image size, file size, recording date, modified date,
file type, and image depth are displayed.
If the scroll bar is grey, there are more images to
display in the the viewer panel.
Scroll through the images in the viewer panel by
clicking on the scroll arrows at the top and bottom
of the scroll bar, dragging the scroll box up or
down, or clicking on the scroll bar.
VIEWER PANEL
24 25
COPYING SELECTED IMAGES
Selected images on the image memory card can be copied to
removable media or your computer's hard drive.
1. Display the thumbnail images from the camera
in the viewer panel (pp. 22).
2. Click on the image to be copied. Select multiple
images by holding down the shift key while
clicking on images.
• A border, or cursor, will appear around the selected images.
• Deselect an image by clicking on it while holding down the shift key.
3. Select Copy Selected Images to Disk... from
the Viewer menu.
• The following dialog box will appear.
Select the folder
where the file will
be saved.
Name the file.
This will be the
prefix.
4. Select the folder from the pop-up menu in the
dialog box where the file will be saved.
5. Enter a new file name in the box labeled Image
File Name Prefix:.
• This will be the prefix of the file name. A numerical suffix will be
added automatically to the file name (see EXIF at bottom of page).
6. Click on Save.
• The viewer panel will return when the operation is complete.
EXIF:
Images are automatically saved in the EXIF file format. The name of an
EXIF file consists of the entered file name as the prefix and a three-digit
numerical suffix. The numerical suffix represents the order which a file
was saved. For example: if two files are selected, the entered file name
will apply to both images and their file names will have a suffix
representing the sequence they were saved -
Entered File Name
001 and
Entered File Name
002.
Copied images can be displayed as thumbnails on the viewer panel.
Dimâge V images can also be acquired from the camera into
applications such as Adobe PhotoDeluxe™ using the QTIC plug-in
(pp. 84 - 85).
2726
COPYING ALL IMAGES
All the images on the image memory card can be copied at once to
your hard drive or removable media.
1. Display the thumbnail images from the camera
in the viewer panel (p. 22).
2. Select Copy All Images to Disk... from the
Viewer menu.
• The following dialog box will appear.
Select the folder
where the file will
be saved.
Name the file.
This will be the
prefix.
3. Select the folder from the pop-up menu in the
dialog box where the file will be saved.
4. Enter the desired file name in the box labeled
Image File Name Prefix:.
• This will be the prefix of the file name. A numerical suffix will be
added automatically to the file name (see EXIF on page 25).
5. Click on Save.
• The viewer panel will return when the operation is complete.
See page 25 for information on naming EXIF files.
VIEWER PANEL
VIEWER PANEL
28 29
DELETING SELECTED IMAGES
You can delete a single image or multiple images from the image
memory card in the camera.
1. Display the thumbnail images from the camera
in the viewer panel (p. 22).
2. Click on the image to be deleted. Select multiple
images by holding down the shift key while
clicking on images.
A border, or cursor, will appear around the selected images.
Deselect an image by clicking on it again while holding down the
shift key.
3. Select Delete Selected Images from
Camera... from the Viewer menu.
• The following message appears.
4. Press OK to delete the images.
Press Cancel to escape the operation.
The viewer panel will return when the operation is complete.
Protected images cannot be deleted. The following message will
appear if you try to delete one or more protected images.
Never remove an image memory card during the delete operation.
VIEWER PANEL
30 31
DELETING ALL IMAGES
It is possible to delete all of the unprotected images from the image
memory card in the camera.
1. Display the thumbnail images from the camera
in the viewer panel (p. 22).
. Protected images cannot be deleted, see page 62 of the camera
manual.
2. Select Delete All Images from Camera... from
the Viewer menu.
• The following message will appear.
3. Press OK to delete the images.
Press Cancel to escape the operation.
The viewer panel will return when the operation is complete.
Protected images cannot be deleted. The following message will
appear if you try to delete one or more protected images.
Never remove an image memory card during the delete operation.
VIEWER PANEL
32 33
SORTING IMAGES
Images copied to your hard drive or removable media can be viewed
as thumbnails and sorted alphabetically by name or chronologically
by date.
. Images on the image memory card cannot be sorted.
1. Select Open Folder Viewer... from the File pull-
down menu.
2. Click once on the folder where the images are
saved, then click on the Select Folder button.
• Do not open the folder.
Click once on the
folder to highlight it.
Click on the
Select Folder
button.
3. Go to View by under the Viewer pull-down
menu and select either Name or Date from the
VIEWER PANEL
34 35
COPYING IMAGES - DRAG AND DROP
You can use the Macintosh's Drag and Drop function to copy images
from the camera.
1. Click on the image to be copied. Select multiple
images by holding down the
shift
key.
A border, or cursor, will appear around the selected images.
Deselect an image by clicking on it again while holding down the
shift
key.
Choose Select All from the Edit menu to copy all the images on the
memory card in the camera.
2. Drag the selection to the desired destination.
. This function cannot be used to copy images from the hard drive or
removable media.
DELETING IMAGES - DRAG AND DROP
While the thumbnails are displayed, you can use the Macintosh's
Drag and Drop function to delete images from the hard drive or
removable media.
1. Click on the image to be deleted. Select multiple
images by holding down the
shift
key.
A border, or cursor, will appear around the selected images.
Deselect an image by clicking on it again while holding down the
shift
key.
Choose Select All from the Edit menu to delete all the images in
the folder.
2. Drag the selection to the trash icon.
. This function cannot be used to delete images from the image
memory card in the camera.
VIEWER PANEL
36 37
DISPLAYING THE FULL IMAGE
The full-size image of a thumbnail representation can be
displayed on the computer monitor.
1. Open the viewer panel and display the
thumbnails of the desired images (pp. 22-23).
2. Double-click on the thumbnail of the image to be
displayed full size (640 x 480 pixels).
When the full-size image appears, the software will switch from the
viewer panel to the image panel. In the image panel, the image can
be edited, printed, or saved in a different file format.
If the "Insufficient Memory" error message appears, increase the
memory allocation for the Camera Access software.
1. Select Quit from the File menu.
2. Select Finder from the application menu (far right on the menu
bar).
3. Open the folder where Camera Access is saved, then click once
on the Camera Access icon. Select Get Info from the File menu.
• The following window will appear.
Increase the preferred
memory setting.
4. Double-click on the box next to Preferred Size, then enter a
higher memory value.
5. Close the window.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Konica Minolta Dimage V Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI